Cuh Sdvc311 series User manual

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

Variable Frequency Digital Controller

for Vibratory Feeder

SDVC311 Series

User Manual

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

Copyright Statement

Disclaimer

Nanjing CUH Science & Technology CO., Ltd. reserves all rights.

All information contained in this user manual is the knowledge of our company

and is protected by copyright law and other related laws. CUH enjoys and

reserves all rights conferred by copyright law and other laws. Without the

written consent of CUH, part or all of this user manual shall not be copied,

translated, imitated or otherwise utilized.

All contents of this user manual only describe the use method of related

products produced by our company, and are described according to the

existing technology and the state provided to you when you use it. You must

bear the relevant risks when you use this product. Except as required by law,

the company does not have any express or implied responsibility for the

product due to this user manual, including but not limited to personal injury,

property damage, loss of opportunity, etc.

You clearly understand the above risks and agree that, except as mandated by

law, the company is not responsible for any direct or indirect damage or loss to

you (including but not limited to tangible loss of personnel, property, data, etc.

and intangible loss of reputation, opportunity, etc.)

The company reserves the right to modify the products applicable in this user

manual without prior or subsequent notice.

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

Danger

Warn

Careful

Notice

Essential

！

Non-observance of this item

will result in personal injury or death.

Non-observance of this item

may result in personal injury or death.

Non-observance of this item

may result in moderate or minor injury to persons.

Non-observance of this item

will result in damage to the product and property damage.

Indicates precautions and usage restrictions that must be

observed during use.

Thank you for choosing CUH SDVC311 series digital frequency modulation

vibration feeding controller. (The controller for short in the following text). This

series of controllers uses high-quality components and incorporates the latest

electronic technology, and is carefully designed with high-performance digital

signal processors.

This manual introduces the basic operation method, functional technical

description and typical application examples of this product. Provide users

with relevant information on installation and debugging, parameter setting,

abnormal diagnosis, troubleshooting and routine maintenance of the

controller. In order to ensure the correct installation and use of this controller,

please read this user manual carefully before installation and keep it properly.

Be sure to read the following symbols to alert you to precautions against

personal injury and product damage.

This manual is suitable for the following models of controllers:

Digital FM Vibration Feeding Controller SDVC311-S (1.5A)

Preface

Digital FM Vibration Feeding Controller SDVC311-M (3.0A)

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

1 This product is only used to drive electromagnet-based vibratory

feeding equipment, do not use this product for the purpose of protecting the

human body or parts of the human body, etc.

2. This product is not intended to be used as an explosion-proof

product, do not use it in hazardous locations and/or potentially explosive gas

environment.

3. This product is powered by AC mains, please do not apply AC voltage

exceeding 260Vac. Excessive input voltage, such as 380Vac, may cause the

product to explode or catch fire, resulting in serious safety accidents.

4. This product is grounded through the power cord. Please ensure that

the power distribution facilities for the controller are well grounded, otherwise

the controller shell may be charged, resulting in an electric shock accident.

5. Do not input AC power to the output of this controller, it will damage

the controller.

6. Do not plug and unplug the wiring with points or touch the contact

of each wiring terminal in the wiring compartment to prevent electric shock.

7. Please avoid controlling the output of this product by cutting off the

power supply through relays and other devices, which will seriously reduce the

life of the controller.

8. The controller is designed to work in a cool and dry environment.

Never run the controller outside to avoid soaking and insolation. Operate the

controller within the temperature specified electrical characteristic.

9. Be sure to fix this product on a solid platform that is reliably

grounded and away from vibrating equipment.

10. Never operate the controller under the condition that beyond its

designed limits.

11. Operate the controller in accordance with this instruction book

strictly. we will not assume any civil or criminal liability if the equipment

damage or personal injury is caused by incorrect operation.

12. Never open the controller shell to avoid electric shock. Contact

CUH if the controller break down. Never try to repair the controller yourself

which may caused void warranty.

. Danger

Danger

Warn

Notice

Essential

！

Essential

！

Essential

！

Essential

！

Safety and Precautions

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

Operating and Storage Environment

Inspection Before Using

Every controller will go through rigorous quality inspection before delivery

and is packed with crash-proof packaging, Please check the following items

after unpacking

1. Whether the controller is damaged during transportation.

2. Whether the model of the controller is that you ordered.

:

Runtime Environment

Please follow the notes below to ensure the better performance and longer

lifetime of the controller:

Well-ventilated environment

Keep away from water, stream, dust and especially oily dust

Keep away from the corrosive or flammable gas and liquid

Keep away from floating dust and metal particles

Firmly fixed to avoid self vibration

Keep away from electromagnetic interference

Ensure ambient temperature is 0~40 ℃

For use at altitude 2000m or lower

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

Chapter Ⅰ Before Use 1

----------------------------------------------------------1

1.2 Indicators, Buttons and External Parts Explanation 2

1.3 Wiring Ports Explanation 3

1.4 Nameplate Explanation 3

Chapter Ⅱ Featured Functions ---------------------------------------------------------4

2.1 Product Introduction--------------------------------------------------------------------4

2.2 Product Performance Improvement ------------------------------------------------4

2.3 Modern/Traditional Parameter Interface-------------------------------------------5

Chapter Ⅲ Installation Guide-----------------------------------------------------------6

3.1 Controller Usage Conditions ----------------------------------------------------------6

3.2 Operation Method of Buttons ---------------------------------------------------------6

3.3 Install and Use ----------------------------------------------------------------------------7

Chapter Ⅳ Basic Function Description ------------------------------------------11

4.1 Output Voltage --------------------------------------------------------------------------11

4.2 Output Frequency ----------------------------------------------------------------------12

4.3 On/Off Delay of Intelligent Photoelectric Sensor -------------------------------13

4.4 Soft Startup Time ----------------------------------------------------------------------14

4.5 Brake Cycles/Soft Shutdown Time -------------------------------------------------14

4.6 Keyboard Lock --------------------------------------------------------------------------16

Chapter Ⅴ Advanced Function Description ----------------------------------17

5.1 Remote Speed Control ----------------------------------------------------------------17

5.2 Intelligent Photoelectric Sensing---------------------------------------------------19

5.3 Switch Sensor ---------------------------------------------------------------------------20

------------------------------------------------------------------------

1.1 Check the Package Contents

-----------------------------

---------------------------------------------------------------

-----------------------------------------------------------------

Contents

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

.4 Control Output 21

5.4.1 Wiring Method of Control Output---------------------------------------------21

5.4.2 Control Output Signal Source and Logic Diagram ------------------------22

5.4.3 Control Output Mode Description --------------------------------------------24

5.4.4 Control Output Logic Direction------------------------------------------------25

5.4.5 Main Output Signal Control Function----------------------------------------25

5.5 Maximum Output Voltage Limit ----------------------------------------------------26

5.6 Acceleration Index ---------------------------------------------------------------------27

5.7 Waveform Index ------------------------------------------------------------------------28

5.8 Parameter Password Lock Function -----------------------------------------------29

5.9 Restore Default Settings --------------------------------------------------------------30

5.10 Parameter Monitoring Function ---------------------------------------------------31

Chapter Ⅵ Technical Specifications ----------------------------------------------32

6.1 Dimensions-------------------------------------------------------------------------------32

6.2 Technical Specifications --------------------------------------------------------------33

6.3 Reference Standard --------------------------------------------------------------------34

Chapter Ⅶ Appendix------------------------------------------------------------------------35

7.1 Parameter Table ------------------------------------------------------------------------35

7.2 Input and Output Circuit Diagrams ------------------------------------------------37

7.3 Troubleshooting Suggestions and Error Explanations ------------------------38

Chapter Ⅷ Product Warranty Information------------------------------------39

8.1 Warranty Period-------------------------------------------------------------------------39

8.2 Warranty Coverage ---------------------------------------------------------------------39

8.3 Product Suitability ---------------------------------------------------------------------39

5--------------------------------------------------------------------------

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

1

接地线

Earth

CUH

创优虎

Variable Frequency Digital Controller

for Vibratory Feeder

Saturated Accelerate Remote Stop Lock

Voltage

Frequency

On Delay

Off Delay

Soft Start

SDVC311-M

This chapter introduces product package contents, controller appearance

description and controller nameplate information.

Before using, please check the integrity of the controller and accessories. If you

find that the product is defective or damaged, missing accessories, etc., please

contact our company.

1.1 Check the Package Contents

Chapter ⅠBefore Use

Controller×1

Output Cable×1

User Manual×1

Input Power Cord×1

Variable Frequency Digital Controller

for Vibratory Feeder

SDVC311 Series

User Manual

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

2

External Parts Explanation

CUH

1 3

2

CUH

1 3

2

CUH

NL

PE

CUH

创优虎

Variable Frequency Digital Controller

for Vibratory Feeder

Saturated Accelerate Remote Stop Lock

Voltage

Frequency

On Delay

Off Delay

Soft Start

SDVC311-M

Output Voltage Indicator:

The indicator lights up as the

controller enters Output

Voltage Adjusting status.

Saturation Indicator:

The indicator lights up when

the preset Output Voltage

value exceeds Input Voltage

value so much that the

controller can’t sustain.

Acceleration Indicator:

The indicator lights up as the

Acceleration function takes

effect when the Output

Voltage value exceeds Input

Voltage value.

Output Frequency Indicator:

The indicator lights up as the

controller enters Output

Frequency Adjusting status.

Startup Delay Indicator:

The indicator lights up as the

controller enters Startup

Delay Time Adjusting status.

Shutdown Delay Indicator:

The indicator lights up as the

controller enters Shutdown

Delay Time Adjusting status.

Soft Startup Indicator:

The indicator lights up as the

controller enters Soft Startup

Time Adjusting status.

Increase & Decrease Buttons

The values of all parameters can be

adjusted by these two buttons.

Up & Down Buttons

Parameter can be switch by these

two buttons.

Setting Button

Enter editing state of basic or

advanced parameter by this button.

Output ON/OFF Button

Start or stop output of the

controller, or lock/unlock keypad

by this button.

Stop Indicator:

The indicator lights up as the

controller halts its output by

external signal or error signal,

and flash by On/Off button.

Remote Speed Control Indicator:

The indicator lights up when

Remote Speed Control signal is

available as the + and - buttons

loses efficacy.

LED Displayer:

Display symbol and value of

parameters.

Output Power Socket

Input Power Socket

Power Switch

1.2 Indicators, Buttons and External Parts Explanation

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

Lock Indicator:

The indicator lights up as the controller

being locked.

When in the locked state, the operation

button does not respond and this

indicator flashes.

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

3

Photosensor

Speed Ctrl

Sensor

Ctrl Out

RGND

GND

Input

RX

Input

O putut

5V out

GND

TX

24V out

A1

B1

C1

A2

B2

C2

D1

A3

B3

B4

C3

D2

1.3 Wiring Ports Explanation

1.4 Nameplate Explanation

Product model

Serial Number

Date of manufacturer

Serial Number Description:

INS01-202111026db6-010067032BF

Specifications

Manufacturer

and address

{{

Input Voltage Range: 85～250VAC

Output Frequency Range: 5.0～400.0Hz

Max Output Current: 3.0A

Max Output Power: 660VA

For use at altitude 2000m or lower

Model SDVC311-M:

INS01-202111026db

6-010067032BF

Nanjing CUH Science & Technology Co.,Ltd

Add.:Building 2, Xueyan Tech Park, Tuscity, No.9 Zhineng Rd, Jiangning, Nanjing, China

Variable Frequency Digital Controller

for Vibratory Feeder

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

4

2.1 Product Introduction

Chapter Ⅱ Featured Functions

This chapter includes a brief introduction and main features of the controller.

SDVC311 Series Digital FM Vibration Feed Controller is a compact general-purpose FM

output controller that provides unique performance through the use of the latest

electronic technology and careful design. Its special features include:

The output frequency range covers 5.0Hz to 400.0Hz with 0.1Hz accuracy.

Brake function to quickly stop the vibratory feeder by shifting the current phase

by 180° during the soft-stop process.

Intelligent photoelectric ports support photo-sensors, NPN or PNP switch sensors.

Switch sensor port supports NPN, PNP or auto-adaptive type.

Control output port supports NPN, PNP or push-pull output mode.

Complete protection functions include: main output short-circuit protection,

overcurrent protection, overheat protection, undervoltage/ overvoltage protection,

control output short-circuit protection, 24V output short-circuit protection, and speed

regulation 5V output short-circuit protection.

●

Compared with SDVC31 controller, SDVC311 has greatly improved

performance. mainly includes:

Added the function of soft shutdown, which can be set to 0.0~10.0 s to slowly

stop the vibration of the vibratory feeder.

Added braking function, you can set 0~100 braking cycles to quickly stop the

vibration of the vibrating disc.

Intelligent photoelectric sensor port adds PNP sensor support.

The Switch Sensor port when the material is full has been upgraded from NPN

and PNP to software-settable, and automatic mode is provided.

The control output port is upgraded from NPN output to three types of NPN,

PNP and push-pull can be set.

Added control output port on/off delay, which can be set from 0.0 to 99.9 s.

Added control output mode, you can set delay mode and hold mode.

Added measurement function, which can monitor temperature, bus voltage,

output current, remote speed control port voltage, intelligent photoelectric sensor

port voltage, switch sensor port voltage, DC control output port voltage and +24V

power voltage.

series series

The output frequency range is widened from 40.0Hz~400.0Hz to 5.0Hz~400.0Hz.

The maximum on/off delay time is increased from 20.0 s to 99.9 s.

●

2.2 Product Performance Improvement

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

5

All new functions will be implemented in the modern parameter interface. In

order to be compatible with the usage habits of regular customers, users can

switch between the modern parameter interface and the traditional parameter

interface through key board operation.

Modern parameter interface switch to traditional parameter interface

At LED interface of default setting restore parameter, Long press until

is displayed on the LED to switch to traditional parameter interface, or long

press until is displayed on the LED to switch to modern parameter

interface.

Traditional parameter interface switch to modern parameter interface

At LED interface of default setting restore parameter, Long press ▼ until

is displayed on the LED to switch to modern parameter interface, or long press

▲ until is displayed on the LED to switch to traditional parameter

interface.

This user manual introduces modern interface parameter settings. For the

settings of the traditional parameter interface, please refer to the user manual

of SDVC31 series controller.

2.3 Modern/Traditional Parameter Interface

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

6

The controller is powered by AC 110/220V, and the protective ground connection is made

through the plug of the power cord. Please provide 110V or 220V, 50Hz/60Hz mains power

supply and distribution facilities that meet the standard and ensure that the protective

ground wire is correctly connected.

Never connect the controller to 380V AC power, this will cause irreversible serious

damage to the controller, possibly resulting in explosion, fire and other safety incidents.

Ensure that the power supply side is reliably grounded. The metal casing of the

controller is directly connected to the protective grounding wire. Poor grounding will cause

the controller casing to be electrified and cause an electric shock accident.

Long time running will generate heat and cause the temperature of the casing to

rise. Please install the controller in a well-ventilated environment and fix it well, away from

vibration sources.

The output of this product is formed by the rectification and inversion of the mains

supply, and there is no isolation between its input and output. Therefore, the output poles

cannot be connected to the protective ground. When connecting the electromagnet, it is

necessary to ensure that the electromagnet coil and the casing have basic insulation

capability. Otherwise, leakage of electricity may occur, which may cause electric shock and

damage to the controller.

This product is a controller used to drive the electromagnet. It must not be

connected to a piezoelectric vibratory feeder.

3.2 Operation Method of Buttons

Chapter Ⅲ Installation Guide

3.1 Controller Usage Conditions

This chapter introduces the necessary conditions for the use of the controller and

how to install and connect it correctly.

Warn

Notice

a. Short press to define the pressing time greater than 0.1 and less than 2 seconds, and

long press to define the pressing time greater than 2 seconds.

a. Short press or button to adjust the Output Voltage of the controller under standby

Interface.

b. Enter or exit the Basic Parameters Interface by long press button, and switch among

the basic parameters by short press ▼ or ▲ button, and adjust parameter's value by short

press or button.

c. Enter or exit the Advanced Parameters Interface by long press and ▲ button, and

switch among the advanced parameters by short press ▼ or ▲ button, and adjust

parameter's value by short press or button.

d. Enter or exit the Monitoring Parameters Interface by long press and ▼ button, and

switch among the monitoring parameters by short press ▼ or ▲ button, but parameter's

value can't be adjusted.

e. Short press button to start or stop output of controller, and long press button to

lock or unlock keypad.

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

7

接地线

Eart h

CUH

创优虎

Variable Frequency Digital Controller

for Vibratory Feeder

Saturated Accelerate Remote Stop Lock

Voltage

Frequency

On Delay

Off Delay

Soft Start

SDVC31 1-M

3.3 Install and Use

Step One:

Open the packing box and check the controller and all accessories.

Earth Wire

(Yellow - Green Dual color Wire)

Output Power Cable

Connect the wiring terminals of the Output Power Cable to the vibrator's

electromagnetic coil.

Align the notch on the aviation plug of the output cable with the triangle mark on

the output socket of the controller, and then tighten the nut after connecting the

output cable correctly.

Step Two:

1. Make sure the vibrator's electromagnetic coils are connected to the two output

pins of the Output Power Cable, and the vibrator's metal shell is reliably grounding.

2. It is forbidden to connect piezoelectric loads to the power output, otherwise it

may cause an electric shock safety accident!

Note

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

X

8

CUH

创优虎

Variable Frequency Digital Controller

for Vibratory Feeder

Saturated Accelerate Remote Stop Lock

Voltage

Frequency

On Delay

Off Delay

Soft Start

SDVC311-M

Step Three:

Connect the

controller side first

Connect the plug of the Input Power Cable to the mains jack.

Step Four:

Connect the Connector of the Input Power Cable

to the Input Power Socket of the controller.

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

9

Output Voltage

Output Frequency

Turn on the power switch of the

controller, and the voltage "U 150 "

should be displayed and Channel A

lights up and the vibratory feeder

should start vibrating.

Harmonic frequency of the vibrator means the

the maximum amplitude.

Each vibratory has its natural mechanical resonance frequency, adjust the

output frequency of the controller to this frequency to achieve the best

working state.

frequency value that creates

Step Five:

Step Six:

Press to adjust the voltage to

30~50V, then press the and

hold for 2 seconds enter the output

frequency "E" adjustment state.

Use and to search the

natural frequency of the vibratory

feeder, which is the resonant

frequency.

Variable Frequency Digital Controller

for Vibratory Feeder

Variable Frequency Digital Controller

for Vibratory Feeder

Saturated

Accelerate

Remote

Stop

Lock

Voltage

Frequency

On Delay

Off Delay

Soft Start

SDVC311-M

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

10

The vibratory feeder should work now. For further control instructions, please

refer to the following chapters.

Long press to exit the output

frequency "E" and returns to the

voltage adjustment parameter,

Use the and to adjust the

voltage until to the best feed rate.

Step Seven:

Variable Frequency Digital Controller

for Vibratory Feeder

Saturated Accelerate Remote Stop Lock

Voltage

Frequency

On Delay

Off Delay

Soft Start

SDVC311-M

U means

Output Voltage

Voltage Indicator

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

11

U means

Output Voltage

Voltage Indicator

Variable Frequency Digital Controller

for Vibratory Feeder

Saturated Accelerate Remote Stop Lock

Voltage

Frequency

On Delay

Off Delay

Soft Start

SDVC311-M

4.1 Output Voltage

Output voltage rectified mean value of the controller can be set directly and

digitally through the keypad. Benefit from the unique voltage stabilizing

function, output voltage of the controller won't fluctuate as the input voltage

does, so that the vibrator can maintain stable operation in case of unstable

grid voltage.

8

controller.

8The controller enters the output

voltage parameter. The voltage

indicator lights up, and the LED

display output voltage parameter

U and the default value 150.

8Press or to adjust the

parameter value.

Turn on the power switch of the

The controller does not have a boost function. When the controller cannot

reach the set voltage due to the limitation of the input power supply

voltage, the saturation indicator will light up, and the mains voltage

compensation will fail at this time.

The controller can achieve a certain degree of acceleration effect by

sacrificing the sinusoidal characteristics of the output waveform, which is

determined by the parameter "acceleration index y". When entering the

acceleration state, the output current waveform changes from a sine wave

to a triangular wave, and the acceleration indicator lights up.

Chapter Ⅳ Basic Function Description

This chapter introduces basic parameter settings in the modern parameter

interface (default).

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

CUH CUH CUH CUH CUH CUH CUH

CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH CUH

12

Variable Frequency Digital Controller

for Vibratory Feeder

Saturated Accelerate Remote Stop Lock

Voltage

Frequency

On Delay

Off Delay

Soft Start

SDVC311-M

4.2 Output Frequency

The controller adopts direct digital frequency synthesis technology (DDS),

which has very high frequency accuracy and stability, and does not change

with time and temperature.

8

enter the basic parameter interface.

8The LED displays the output

frequency parameter "E" and the

default value 50.0.

8Press or to adjust the

parameter value.

Press and hold for 2 seconds to

E means

Output Frequency

Frequency Indicator

SDVC311 Series

Variable Frequency Digital Controller for Vibratory Feeder

SDVC311SMSEN_1.032023-08

CUH SDVC311 Series User manual

Popular Controllers manuals by other brands