cultsport smartcross b1 User manual
Important Safety Information
We thank you for choosing our product. To guarantee your safety and health,
please use this equipment correctly. Please read the information as below
carefully before using this equipment.
1. It is important to read this entire manual before assembling and using the
equipment. Safe and effective use can only be achieved if the equipment
is assembled, maintained and used properly.
2. Before starting any exercise program you should consult your doctor to
determine if you have any medical or physical conditions that could put
your health and safety at risk, or prevent you from using the equipment
properly. Your doctor’s advice is essential if you are taking medication
that affects your heart rate, blood pressure or cholesterol level.
3. Be aware of your body’s signals. Incorrect or excessive exercise can
damage your health. Stop exercising if you experience any of the
following symptoms: pain, tightness in your chest, irregular heartbeat,
extreme shortness of breath, lightheadedness, dizziness or feelings of
nausea. If you do experience any of these conditions you should consult
your doctor before continuing with your exercise program.
4. Keep children and pets away from the equipment. The equipment is
designed for adult use only.
5. Use the equipment on a solid, flat level surface with a protective cover
for your floor or carpet. To ensure safety, the equipment should have at
least 0.5 meters of free space all around it.
6. Before using the equipment, check that the nuts and bolts are securely
tightened. Always use the equipment as indicated. If you find any
defective components while assembling or checking the equipment, or if
you hear any unusual noises coming from the equipment during use,
stop immediately. Do not use the equipment until the problem has been
rectified.
7. There are many functions of the computer, which value will show when
using the equipment according the amount of exercise ,here warmly
remind you that the value of heart pulse just give you some reference.
8. Wear suitable clothing while using the equipment. Avoid wearing loose
clothing that may get caught in the equipment or that may restrict or
prevent movement.
9. This equipment is designed for indoor and family use only。Maximum
weight of user: 120KG.
10.Care must be taken when lifting or moving the equipment so as not to
injure your back
11.Please save this manual and assembling tools well.
12.The equipment is not suitable for therapeutic use.
Exploded View
90
90
86
13
38
89
88
87
88
91
85
91 98 9695 94 92
93 94 95 96 97 9190
79 78 77 76 75
83 05
76
82
77 78 79
84
74
31 27 20 28 33
56
32
57 1933 29 30
03
31 36 34
34 3537 3831
45
39
11
40
41
02
43
40
41
49 46
48
47
44
08
44
40
41
4654 52
55
45
42
64
64
63
64
64
61
15
22 14 17
22
19 20 18
105
110 106
60
38 18
105
104
100
06
99
102 101
16
103
104
107
25
26
26
108
07
24 18
107
25
30 29 33
56
32
57 19
33 28 20 27 31
31 38 37 34 34 35 36 31
04
59 10
58
39
11
45
40
41
00
81
80
01
100
43 48
47
40
41
55 53 54 46 08 46
50
42
63 64
63
64
64
15
45
72
71
65
66
67
67
66
69
68
70
02
09
59
58
17
12
23
21
23 19
20
18
21
20
44
44
51
51
62
73
98
109
111 112 113 114
Parts List
No.
Description
Qty.
No.
Description
Qty.
01
Main frame
1
33
Bushing 1Φ32*3*Φ28*16*Φ14.3
4
02
Connecting rod
2
34
Bushing 4
4
03
Swing rod (L)
1
35
Bushing Φ14*Φ8.3*48
2
04
Swing rod (R)
1
36
Bolt M8*63*20*S13
2
05
Magnetic Plate
1
37
Washerd8*Φ16*1.5
5
06
Handlebar post
1
38
Nut M8*H7.5*S13
9
07
Middle handlebar
1
39
BoltM10*42*20*S17
2
08
Rear connector
2
40
Washerd10*Φ20*2
8
09
Handlebar (L)
1
41
Nut M10*H9.5*S17
8
10
Handlebar (R)
1
42
Pedal365*125*45
2
11
U shape seat
2
43
BoltM10*45*20*S14
4
12
Front stabilizer
1
44
Bushingφ18*3*φ14*7*φ10.1
4
13
Idler connecting rod
1
45
End capJ40*25*15
4
14
Rear stabilizer
1
46
BushingΦ28*4*Φ24*12*Φ16.2
4
15
Coverφ302*15.5
2
47
Bolt M10*50*13*S17
2
16
Bolt M5*12
2
48
End capS16
2
17
Bolt M8*65*20*H5
4
49
BoltΦ16*89*23*1/2*S8 L
1
18
Arc washer d8*Φ20*2*R30
9
50
BoltΦ16*89*23*1/2*S8 R
1
19
Nut M8*H16*S13
6
51
Wave washerd17*Φ22*0.3
2
20
Spring Washer d8
8
52
Nut 1/2*20*H8*S19 L
1
21
End capΦ50*Φ60*48
2
53
Nut 1/2*20*H8*S19 R
1
22
End capΦ50*45.5*64.5*64.5
2
54
Spring Washer 1/2"
2
23
ScrewST3*10*Φ5.6
2
55
End cap S18
2
24
ScrewM8*20*S6
2
56
Bolt M8*35*15*S14
2
25
Foam gripΦ20*5*240
2
57
Arc washerd8*Φ20*2*R16
2
26
End capΦ22*13
2
58
End capΦ28*32*Φ50
2
27
Bolt M8*16*S13
2
59
Foam gripΦ26*5*410
2
28
Washerd8*Φ32*2
2
60
Bolt M8*58*15*S13
3
29
Wave washerd19*Φ25*0.3
2
61
Housing L
1
30
Long spacerΦ32*Φ19.5*75.5
2
62
Housing R
1
31
End cap S13
6
63
ScrewST4.2*16*Φ8
4
32
BushingΦ32*Φ26.5*L82.7
2
64
Screw ST4.2*19*Φ8
8
65
Nut 1
1
90
Bolt M6*12*S10
3
66
Roller Ф51.6
2
91
Washer d6*Φ16*1.5
3
67
Roller seat
2
92
Flywheel 3*φ200
1
68
Nut 2
1
93
AxleΦ20*103
1
69
Washer
1
94
Bearing bracket Φ72*11
2
70
Nut
1
95
Bearing 6001-2RS CXSH
2
71
Washer d26*Φ38*1
1
96
Fixed plate t1.5*56*76
2
72
Crank 235*152*65*1/2*20
1
97
Screw M6*8*Φ12
1
73
Belt plate Φ240*20*S25-6PJ
1
98
Screw M6*10*Φ12
5
74
Magnet 39*24.5*10
4
99
Tension control 540
1
75
Axle φ12*61*6.8*47.4*M6
1
100
Tension control wire 1400
1
76
C-Ring d12
2
101
Arc washer Φ25*Φ6*3.3*R25.2
1
77
Washer d6*Φ12*1.2
2
102
Screw M5*15*Φ10
1
78
Spring Washer d6
2
103
Computer
1
79
Bolt M6*16*S10
2
104
Trunk wire 850
1
80
Bolt M6*45*S10
1
105
Sensor wire 1200
1
81
Nut M6*H5*S10
2
106
Sensor seat
1
82
Spring Φ1.5*Φ15*41*N8
1
107
Handle pulse
2
83
Magnet locator 45.5*130*10.5
1
108
Handle pulse wire 700
1
84
Screw ST3*10*Φ5.6
5
109
Screw ST4*19*Φ7
2
85
Spring Φ2*Φ12*54*N15
1
110
Screw ST4.2*16
1
86
Screw M8*12*Φ10*5*S12
1
111
Spanner S8
1
87
Idler Φ39*Φ34*24
1
112
Spanner S6
1
88
Bearing 6001-2RS
2
113
Spanner S17-19
1
89
Wave Washer d12*φ17.5*0.3
1
114
Spanner S13-14-15
1
ASSEMBLY INSTRUCTIONS
STEP 1:
17
19
20
18
17
12
14
01
19
20
18
19
20
18
#19 M8*H16*S13 4PCS
#114 S13-14-15 1PC
#18 d8*Φ20*2*R30 4PCS
#17 M8*65*20*H5 4PCS
#20 d8 4PCS
STEP 2:
06
01
60
38 18
105
104
100
99
104
Figure 1
99
100
Figure 2
105
#60 M8*58*15*S13 3PCS
#18 d8*Φ20*2*R30 3PCS
#38 M8*H7.5*S13 3PCS
#114 S13-14-15 1PC
Secure front stabilizer (12) and rear
stabilizer (14) to main frame (01)
with bolt(17),arc washer (18) ,spring
washer (20)and nut (19). Then fix it
by spanner(114).
1 .Connect sensor wire (105) with
trunk wire (104) as the Figure 1;
Connect Tension control (99) with
Tension control wire (100) as the
Figure 2;
2.Insert the handlebar post (06)into
main fram(01) ,fix them with bolt(60)、
arc washer(18)and nut(38) by
spanner(114).
STEP 3:
31 27 20 28
29
31
27
20
28
29
03
04
02
02
06
49 51 08 5452 55
R
R
R
L
L
L
55
50
51
53
08
54
72
72
72
#27 M8*16*S13 2PCS
#28 d8*Φ32*2 2PCS
#20 d8 2PCS
#114 S13-14-15 1PC
#49 Φ16*89*23*1/2*S8 L 1PC
#50 Φ16*89*23*1/2*S8 R 1PC
#51 d17*Φ22*0.3 2PCS
#54 1/2" 2PCS
#52 1/2*20*H8*S19 L 1PC
#53 1/2*20*H8*S19 R 1PC
#111 S8 1PC
#113 S17-19内S17 1PC
STEP 4:
43
40
41
42
43
42
40
41
02
02
#43 M10*45*20*S14 4PCS
#40 d10*Φ20*2 4PCS
#41 M10*H9.5*S17 4PCS
#113 S17-19-S17 1PC
1.Take out the pre-installed bolt
(27),spring washer (20) and washer
(28) from the handlebar post (06).
2.Insert the swing rod (L) (03) and
swing rod (R)(04) to the left and right
sides of handbar post (06) seperately.
Fix them with bolt (27),spring washer
(20), and washer (28) using the
spanner (114); then attach end cap
(31);
3.Put the bolt(49) and wave washer
(51) through the rear connector
(08),rotate it counter-clockwise and
secure it on the left of crank(72) by
spanner (111).Then fix it clockwise
with spring washer (54) ,nut (52)and
spanner (113) as the picture .Finally
attach end cap (55) .
4.Put the bolt(50) and wave washer
(51) through the rear connector
(08),rotate it clockwise and secure it
on the right of crank(72) by spanner
(111).Then fix it counter-clockwise
with spring washer (54) ,nut (53)and
spanner (113) as the picture .Finally
attach end cap (55)
Secure pedal (42) to connecting rod
(02) with bolt (43),washer (40) and nut
(41).Fastenit by spanner(113).
STEP 5:
09
10
03
04
56
57 19
56
57 19
#56 M8*35*S14 2PCS
#57 d8*Φ20*2*R16 2PCS
#19 M8 2PCS
#114 S13-14-15 1PC
STEP 6:
24 18
20
16
103
104
103a
06
103a
104
07
#24 M8*20*S6 2PCS
#20 d8 2PCS
#18 d8*Φ20*2*R30 2PCS
#112 S6 1PC
#114 S13-14-15 1PC
108
1
1.Insert and secure handlebar
(L)(09) to swing rod (L)(03)
with bolt (56), arc washer (57)
and nut (19). Fasten it by
spanner(114).
2.Insert and secure handlebar
(R)(04) to swing rod (R)(04)
with bolt (56), arc washer (57)
and nut (19). Fasten it by
spanner(114).
1.Secure middle handlebar (07) to
handlebar post (06) with
bolt(24),spring washer (20) and arc
washer (18), then fasten it by
spanner(112).
2.Remove the bolt (16) on the back
of computer,connect computer
wire (103a) with trunk wire
(104) ,then secure computer (103)
to the handlebar post (06) with bolt
(16).
3.Insert handle pulse wire (108)
into the hole on the back of
computer (103).
The install is completed.
EXERCISE COMPUTER
BUTTONS
1. MODE
i. Press this button to changeover display or choose the window needs to be set.
ii. In monitor status, hold this button for 3 seconds to reset all value to zero.
FUNCTIONS
1.SCAN
i: Press MODE button until “SCAN “appears, computer will rotate through all the 5 functions: Time,
Speed, Distance, Calorie and pulse. Each display will be hold for 6seconds.
2.SPEED
i. Display instantaneous speed.
3.TIME
i. Count the total time from exercise start to the end.
4.DISTANCE
i. Count the total distance from exercise start to the end.
5. CALORIES
i. Count the total calories consumed from exercise start to the end.
6. PULSE (IF HAVE)
i. Hold the pulse sensor and read your heart rate per minute.
7.AUTO START/STOP
i. Without any signal of exercise or operation for 4minutes, the power will turn off automatically.
ii. Once receive exercise or operation signal, the monitor will turn on automatically.
OPERATION
1. PULSE RATE(IF HAVE):
Remark: During the process of pulse measurement, because of the contact jamming, the measurement
value may be higher than the virtual pulse rate during the first 2～3 seconds, then will return to normal
level. The measurement value cannot be regarded as the basis of medical treatment.
SPECIFICATIONS
FUNCTION
Auto Scan
Every 6seconds
Running Time
00:00 ~ 99:59(Minute: Second)
Current Speed
The max pick-up signal is 999.9
MILE/H or KM/H
Trip Distance
0.0 ~ 9999 MILE or KM
Calories
0 ~ 9999 cal
Pulse Rate (if have)
40-240BPM
Battery Type
2 pcs of SIZE-AAA and UM-4
Operating Temperature
0℃~ +40℃(32℉~ 104℉)
Storage Temperature
-10℃~ +60℃(14℉~ 140℉)
Table of contents
