Curia & Co CO-SK51-MCM User manual

CO-SK51-MCM
CONSOLE TABLE
ASSEMBLY INSTRUCTIONS
CURIA
TM & CO LIMITED WARRANTY
CuriaTM & Co Warrants, to the original purchaser its products to be free from defects in material and workmanship for a period of 1 year. Defects and damage
from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of CuriaTM & Co is not covered.
The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user
assumes all risk of injury resulting from use of this product. This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.

PARTS LIST
(A) Console Table (1 PC) (B) Leg (4 PCS)
(D) Side Shelf (2 PCS)(C) Middle Shelf (2 PCS)
DRAWINGNO DESCRIPTION SIZE QUANTITY
1
2
3
4
4 PCS + 1 Extra
4 PCS + 1 Extra
1 PC
Lock Washer
Flat Washer
Allen Wrench
1/4’’
4 PCS + 1 ExtraBolt 1/4’’ x 1-3/4’’
8 PCS + 1 ExtraBolt 1/4’’ x 1/2’’
1/4’’ x 19mm
4mm
5
6
7
16 PCS + 1 ExtraShelf Support
1 KitAnti-Tip Kit
HARDWARE LIST

STEP 1
STEP 2
NOTE: FULLY TIGHTEN ALL BOLTS USING ALLEN WRENCH (5).
SLIDE BRACKET OF LEGS (B) INTO CORNER BLOCKS OF CONSOLE TABLE (A).
(A)
(B)
(B)
(B)
(B)
(A)
(5)
(2)
(3) (4) (5)
(1)

STEP 3
STEP 4
(6)
(C)
(C)
NOTE: INSERT SHELF PINS (6) INTO CONSOLE TABLE (A).
NOTE: PLACE SHELVES (C & D) ONTO SHELF PINS (6).
(D)
(D)

STEP 5
NOTE: ADJUST LEVELERS TO LEVEL CONSOLE TABLE.

ANTI-TIP KIT INSTALLATION
STEPS:
Place Console Table in desired location. Carefully drill a ¼’’ pilot hole into wall, gently tap Anchor into pilot hole.
Secure Bracket to wall using one Long Screw, FULLY TIGHTEN LONG SCREW USING PHILLIPS SCREWDRIVER
(not provided). Secure Mount to rear of cabinet using two Short Screws, FULLY TIGHTEN SHORT SCREW USING
PHILLIPS SCREWDRIVER (not provided). Loop Safety Strap through Bracket & Mount and fasten Safety Strap.