Current Mini LOOP BT User manual

MINI BT CONTROLLER
Quick Start Guide
r
Each Mini LOOP BT Controller includes:
Item Description Quantity
A LOOP Mini Controller w/Bluetooth 1
B Temperature Sensor 1
C 3M Adhesive 1
D Mounting Bracket 1
E Wood Screws 2
LED Light
Connector
DC12V
TEMP
MOUNTING INSTRUCTIONS
IMPORTANT: If you are missing anycomponents,
do not contact your retailer. Please contact us at:
www.current-usa.com/warranty
WHAT’S INCLUDED
DC12V
TEMP
12V DC
Power
Temperature
Sensor
microUSB
HUB Connections
TOP
BOTTOM
LED Light Connector
IMPORTANT - BEFORE INSTALLATION
Unplug all power to any existing LOOP products.
When connecting LOOP products to controller, gently slide connector in and tighten.
Do not twist or rotate. Excessive force can damage pin connections.
1. Remove controller and all components from packaging.
2. Locate a mounting position for controller, ensuring it is in a dry
place away from water splashing, salt creep or dripping water.
3. Clean mounting location of any dirt or debris using a damp rag.
4. Attach Controller mount to cabinet using either 2 wood screws
or 3M Adhesive (included).
DO NOT expose controller to moisture, water or salt creep.
DO NOT use with LOOP IR Controller or Remote (they are not compatible)
CABLE CONNECTIONS
1. Connect LED light to Mini BT controller by gently
pushing into top 3-pin connector and tightening.
2. Place temperature sensor into sump or aquarium
and attach using suction cup.
3. Connect Temperature sensor to Temperature USB
port on bottom of controller.
4. Attach controller to cabinet by sliding vertically into
mounting bracket.
Slide into Bracket
A
B
C
D
E

r
DC12V
TEMP
CONTROLLER OPERATION AND FEATURES
CABLE CONNECTIONS
A
5. Plug 12V DC power supply into a GFCI outlet and
ensure drip loop is in place.
6. Connect plug to controller,controller key ring will
illuminate BLUE, indicating power is now ON.
Controller Key Ring displays status of controller. There are 4 indicators/features using the Key Ring:
BLUE - Indicates normal operation. Press once to activate feed mode.
RED - Voltage issue. Ensure ONLY 12VDC power is connected.
GREEN - LOCK feature, locks the controller settings and prevents other mobile
devices from connecting to controller. Press and hold Key for 6 sec.
to lock settings. Press and hold for 6 sec. to unlock.
- Indicates controller is in manual feed mode (will resume after 10 min.)
PURPLE
WHITE
- Indicates controller is in manual ON (Daylight setting) mode. Press
Key for 3 seconds, LED light will turn ON to Daylight setting. Press a
again for 3 seconds to resume app settings (Bluetooth.)
DC12V
TEMP
CONTROLLER
KEY RING
Product Specifications
Model: 1695
LED Light Input: 12VDC, 60w max per channel
Temperature Port: USB, (+/- 1C )
MicroUSB Port(s): 2 LOOP Networking
Communication: Bluetooth 4.0
Settings Memory: Flash
Battery Backup: Built-in
Operating Temp: (0
- 45 C)
Dimensions: 1.75 in. x 3 in. x 0.75 in.
Weight: 2 oz.
Mobile Device/App Requirements:
Bluetooth 4.0 Compatible
iPhone 4S or above running iOS 9 or above.
Android OS 4.0.3 or above
Contains transmitter module
FCC ID: 2ABN2-RFBMS01
AC Power
GFCI
Outlet Ensure use of drip
loop for all cables
Drip
Loop
12V DC
POWER SUPPLY
LED Light
Temp Sensor

MOBILE DEVICE CONNECTION
1. Download the latest version of LOOP app:
2. From your phone's Settings screen, search for Bluetooth and make sure it is turned on by
moving the slider button to the right (please do not try to connect LOOP through this setting*.)
4. Press Add Device. 5. Select LOOP
7. Rename system
3. Open the LOOP App.
6. Select LOOP 8. Back to HOME
Set up is complete, your’re ready to experience LOOP!
For additional detailed instructions for setting up your LOOP system and troubleshooting tips,
please visit our website support page at:
IMPORTANT! The LOOP APP does NOT
require a PIN code for Bluetooth connection.
Please use the connecting instructions below.
www.current-usa.com/app
The *LOOP app does NOT require a PIN code or use the built-in Bluetooth pairing in your
mobile device - the app itself will connect with your device using its own software.
www.current-usa.com/app

CONNECTING TO OTHER LOOP HUB MANIFOLDS
Use the below diagram as a guideline for connecting Add-On accessory items to your LOOP system.
(HUB order can be re-arranged and only require connection to Bluetooth controller for app operation.)
LIMITED WARRANTY
This product must be purchased from an authorized Current-USA reseller or directly from Current-USA, Inc. Visit our
website for a list of authorized resellers. Current-USA, Inc. warrants thisproduct against defects in materials and
workmanship for ONE (1) YEAR from the date of original retail purchase and is non-transferable.
Warranty on all products is limited to replacement of the product and does NOT cover fish loss, personal injury, property
loss or direct, incidental or consquential damage arising from the use ofthis product. NOTE: Current-USA, Inc. One-Year
Limited Warranty does not cover damage causedby the following: improper installation, saltwater corrosion, electrical
surges or modifications.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS, WHETHER ORAL
OR WRITTEN, EXPRESSED OR IMPLIED. CURRENT USA INC. SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED
WARRANTIES INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE OR REPLACEMENT
OF EQUIPMENT AND PROPERTY, AND ANY COSTS OF RECOVERING ANIMALS, PLANTS, CORALS, TANKS OR
OTHER AQUARIUM RELATED ITEMS AND/OR EQUIPMENT. CURRENT USA, INC. IS NOT RESPONSIBLE FOR SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROOM ANY BREACH OF WARRANTY, OR ANY COSTS OF
RECOVERING OR REPRODUCING ANY EQUIPMENT, ANIMALS OR PLANTS USED OR GROWN WITH CURRENT-USA,
INC. PRODUCTS. Some jurisdictions do not allow the exclusion or limited of incidental or consequential damages or
exclusions of implied warranties, so the above limitations or exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights that vary from jurisdiction to jurisdiction.
DC12V
TEMP
DC 12V
Power
LED LIGHT #1
Supply
DC Flow Pumps
Add-On Wave Pumps
1
2
3
1
212
Add-On LED Lights
DC 12V
Power
Supply
DC 12V
Power
Supply
DC 24V
Power
Supply
DC 24V
Power
Supply
DC 24V
Power
Supply
Temperature
Sensor Connect HUB Manifolds with microUSB cables (included).
LOOP
Controller