Current SILENT TRAC User manual
1
Set up with the bridge and app
Set up with the bridge (no app)
Pair the remote to the Drapery
Remove the drapery from a network
Statements
..........2
..........4
..........5
..........7
..........8
Bridge Set Up Guide
2
I. Setup with the bridge with app
1. DOWNLOAD THE APP
Download the Current Products Corp. app from the Google Play
Store or the App Store. Follow the prompts to set up your account.
2. POWER THE BRIDGE
Find an outlet in a location central to the drapery you are installing
in the home. Insert the micro-usb end of the included power cable
into the power port on the bridge. Plug the other end of the cable
into an outlet. See Figure 1.
Figure 1 - Plug in the bridge
For additional help during installation of your drapery track, visit www.currentproductscorp.com/support/drapery-track
or call 1-844-307-7435.
3. CONNECT THE BRIDGE
During the set up process, the app will ask you to scan the QR code
located on the bottom of the bridge. Scan the code when prompted.
connected to your account. See Figure 4.
Following this step skips the process of having to select a network
and wil connect to the one being used.
Your bridge is now connected to your account. Figure 4 - Scan the QR Code on the bottom of the bridge
The LEDs on the bottom of the bridge will be solid red and solid
green during start up. The LEDs will then turn solid red. See Figure
2.
Enable the Bluetooth on the bridge when prompted. The app will
ask you to press and release the recessed button on the bottom of
the bridge. The LED lights will turn solid blue and solid red. See
Figure 3.
Figure 2 - LED indicators
LEDs
Figure 3 - Press and release the recessed button
Solid Blue
Bluetooth Enabled
Flashing Blue
Join Mode
Solid Green
Connected to Server
Flashing Green
Command Received
Solid Red
No Internet Flashing Red
Not Registered/Error
3
4. PAIR AND ADD THE DEVICES
In the app under devices, hit the + sign. See Figure 5.
Figure 5 - Hit the + to add a device
Figure 6 - Pull down and release the pendant twice
2x
Beach House
On any drapery you wish to pair to the bridge (you can add more
than one devide at a time), pull down and release the Pendant once
to start the drapery, then once to stop it. See Figure 6.
You will see the device pop up in the menu on your Smart Phone
screen. Select the appropriate device, using the “identify” button
if needed. See Figure 7.
device.
Repeat step 4 for adding any additional devices.
Figure 7
Once your devices have been added, follow the prompts in the app
to set up groups, scenes, and schedules as desired.
If you are pairing a third party device, follow that manufacturers
instructions to put the device into pairing mode.
4
II. Setup with the bridge Only (No App)
1. POWER THE BRIDGE
Find an outlet in a location central to the drapery that you are
installing in the home. Insert the micro-usb end of the included
power cable into the power port on the bridge. Plug the other end
of the cable into an outlet. See Figure 8.
Push a tack or paperclip into the hole in the back of the bridge and
press and hold the button for 5 seconds or until the LED begins to
2. PUT BRIDGE IN PAIRING MODE
Figure 8 - Plug in the bridge
Fig 10 - Press and release the button on the back of the bridge
red. See Figure 9.
will stay red. See Figure 11.
Figure 11 - LED Indicators
LEDs
Solid Blue
Bluetooth Enabled
Flashing Blue
Join Mode
Solid Green
Connected to Server
Flashing Green
Command Received
Solid Red
No Internet Flashing Red
Not Registered/Error
LEDs
Solid Blue
Bluetooth Enabled
Flashing Blue
Join Mode
Solid Green
Connected to Server
Flashing Green
Command Received
Solid Red
No Internet Flashing Red
Not Registered/Error
5
III. Pair the Remote to the drapery (Zigbee)
1. PAIR REMOTE TO BRIDGE
If using the Current Products Corp. bridge, use a tack or paperclip
to press and hold down the button on the bottom of the bridge for
5 seconds. After 5 seconds, release the button to put the bridge in
pairing mode. See Figure 14.
Figure 14 - Press and release the back button on the bridge
blue again. See Figure 15.
On any drapery that you would like to pair to the bridge, pull down
and release the Pendant once to start the drapery, then once again
to stop it. See Figure 12.
3. PAIR DRAPERY
Figure 12 - Pull down and release the pendant twice
2x
Repeat Steps 2 & 3 for all remaining devices.
If the drapery does not jog, try putting the drapery into pairing
mode again. You have 5 minutes until the bridge times out of
pairing mode.
If the pairing is not successful again, try a Master Reset on the
drapery.
LEDs
Solid Blue
Bluetooth Enabled
Flashing Blue
Join Mode
Solid Green
Connected to Server
Flashing Green
Command Received
Solid Red
No Internet Flashing Red
Not Registered/Error
LEDs
Solid Blue
Bluetooth Enabled
Flashing Blue
Join Mode
Solid Green
Connected to Server
Flashing Green
Command Received
Solid Red
No Internet Flashing Red
Not Registered/Error
6
2. INITIATE PAIRING MODE ON DRAPERY
Pull down and release the Pendant twice to enter learn mode.
should stop it. See Figure 17.
3. PAIR REMOTE TO DRAPERY
Press and release the top left button on the remote. The drapery
Figure 17 - Pull down and release the Pendant twice
Figure 18 - Press the channel button until the
desired channel is selected
Figure 19 - Depress and release the back button on the remote
Figure 20 - Press and release the top left button to pair
2x
Pull the “Pull” tab from the bottom of the remote you would like to
pair to the drapery (if the tab has already been removed, press and
release any button on the remote face). The LEDs on the front of
the remote will scroll back and forth to show it is seeking a bridge
to connect to. See Figure 16.
Figure 16 - Remove the pull tab or press any button on the face of the
remote.
When the remote successfully joins the network, the LEDs on the
and join the network, the lights will turn off after 10 seconds.
On multi-channel remotes, select the channel you wish to pair to
by pressing the Channel button until the LED corresponding with
the appropriate channel is lit. See Figure 18.
Depress the “pairing” button on the back of the remote by pushing
a tack or paperclip through the hole in the back of the remote.
See Figure 19. The LEDs on the front of the remote will scroll to
7
IV. Remove the drapery from a network
2. SETUP THE DRAPERY FOR MASTER RESET
Move the drapery to a position halfway between full open and full
closed. See Figure 28.
Figure 27 - Pull down and release Pendant or cord once
Figure 28 - Move drapery to halfway between open & closed position
In some instances it may become necessary to remove your drapery from the network. Removing the drapery from the network
will remove the drapery from the bridge and you will need to re-add it back to your network before you can use the remote or
app.
1. DISCONNECT POWER
Disconnect power from the unit. For hardwired units, simply
unplug the device. For battery powered units, remove the battery
tube by twisting it off of the connection wire. See Figure 26.
Figure 26 - Disconnect power
3. RECONNECT POWER
Reconnect power to the unit by plugging the unit back in or by
reconnecting the battery tube. See Figure 29.
4. PERFORM MASTER RESET
Pull down on the Pendant and hold for 10 seconds or until the
drapery jogs. See Figure 30.
Your drapery has now been removed from the network.
Figure 29 - Reconnect power
Figure 30 - Pull down and hold Pendant for 10 seconds
With power disconnected, pull down on the Pendant or cord and
release once. See Figure 27.
8
V. Statements
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
Warning:
NOTE:
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
which the receiver is connected.
RF WARNING STATEMENT
installed and operated to provide a separation distance of at least 20 cm from all persons.
IC STATEMENT
device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation
of the device.
9
844-307-7435
support@currentproductscorp.com
www.currentproductscorp.com
Other manuals for SILENT TRAC
6
Table of contents
Other Current Home Automation manuals
