Current E-WAND Guide
1
Installation Manual and
User Guide
2 3
Installation Manual & User Guide
Please carefully and fully read the following Installation
Manual and User Guide. Without proper installation and
programming, your E-Wand will not perform as designed.
Please save these instructions.
Please be aware that the E-Wand may behave dierently
based on blind manufacturer, slat size, and tilt mechanism
location.
For assistance:
CALL: 844-307-7435
EMAIL: [email protected]
WEBSITE: www.myewand.com/support
Instructional Videos can be viewed by going to
www.myewand.com/support
or by scanning the QR Code with your smart
phone.
TABLE OF CONTENTS
Mounting & Programming the E-Wand
Horizontal Blinds Installation & Programming Guide
Vertical Blinds Installation & Programming Guide
Batteries
5
6
7
7
8
9-10
11-14
15-18
19-21
22-25
27-29
30-31
32
33
34
35
35-36
37
37
38
38
39
39
40
To register your E-Wands, visit
www.currentproductscorp.com/product-registration.
4 5
PACKAGE CONTENTS
AND PARTS IDENTIFIER
HORIZONTAL BLIND
MOUNT
VERTICAL BLIND
MOUNT
(6) AA 1.5V
ALKALINE
BATTERIES
VERTICAL BLIND
REINFORCEMENT TAPE
EXTRA
ADHESIVE
STRIPS
OPTIONAL REMOTE with
wall plate
MANUALS
Optional HORIZONTAL
TILT Converter
Optional EXTENSION
HANDLE
Wand Hook
Sleeve
Extension Handle
41
42-43
44-45
46
47
47
47
48
48
49
49
50
51-53
54-55
SOLD SEPARATELY
OPTIONAL BRIDGE WITH WALL PLATE
6 7
MEET YOUR E-Wand
Attachment Hook
Programming Button
Retaining Sleeve
Light Sensor Switch
Temperature Sensor switch
Control Housing
Twist Handle
Battery Cap
The E-Wand allows the user to motorize the slat tilt for both horizontal and
vertical window blinds. Users can fully control the position of an individual blind’s
slats or a dened group of blind’s slats manually with a slight twist of the handle,
with the remote, through the MyCurtains app, and using voice control.
Your E-Wand contains both light and temperature sensors for localized
automation of the opening and closing of the slats. This automatic movement
helps provide privacy at night and can be set to open and close the slats to assist
with maintaining a comfortable room temperature and help save energy.
For power, the E-Wand requires six (6) 1.5v Alkaline AA sized batteries (provided)
which are easy to replace and will provide, in most cases, approximately a year
between battery changes.
HORIZONTAL BLINDS DIAGRAM
HEADER
MANUAL TWIST
WAND
OR CORDED TILT
LIFTING CORD
SLATS
NOTE: Some blinds use a corded tilt mechanism to tilt the slats instead of a wand.
If your horizontal blinds have a corded tilt mechanism, you will need to convert
it to a wand tilt mechanism using the Horizontal Tilt Converter (sold separately).
Instructions for converting to a wand tilt mechanism can be found on page 9.
TILT GEAR
STEM VALANCE
Vertical BLINDS DIAGRAM
SLATS
HEADER
MANUAL TWIST WAND
NOTE: The E-Wand is not compatible with vertical blinds that use a rope or chain
to open and close the slats.
TILT GEAR
STEM
SLAT
ATTACHMENT
8 9
MOUNTING & programming
THE E-Wand
1. POWER UP
Figure 1.1 Unscrew Battery Cap
Figure 1.2 Insert Batteries
When batteries are properly installed, the E-Wand will play a
HORIZONTAL BLINDS
Installation & Programming
2. Converting a horizontal cord tilt blind
Figure 2.1; Standard Assembly
Figure 2.2; Remove Tassels
Figure 2.3; Standard Assembly
10 11
and slide the rod through the gear to its
Figure 2.4; Snap in Adapter
Figure 2.5; Slide Stem through Header
blinds in both directions
3. Installing the e-wand on Horizontal
Blinds
E-WAND
12 13
Figure 3.1; Slide Hook Sleeve onto Stem
-
Figure 3.2; Hook
Wand onto Tilt Stem
Figure 3.3; Push up
Retaining Sleeve
can be seen through the cutout in the
Figure 3.4; Snap on
Blind Mount
Figure 3.5; Proper
Positioning
AND that the blind slats resting in the
Figure 3.6; Tilt Stem
Protrudes from
Headrail Preventing
a Flush Mount
Figure 3.7; Blind
Slats Touch
E-Wand
Figure 3.8; Proper
positioning without
valance
Figure 3.9; Proper
positioning with
valance
14 15
4. programming e-wand
horizontal slat positions
E-Wand from the beginning.
Figure 4.1; Press and Hold Programming
Button
Figure 3.11; (Optional) Trim Blind Mount
to Fit
Figure 3.12; Remove Backing from
Adhesive Strip to Attach it to Header
to build the mounting attachment
Figure 3.10; (Optional) Build out Header
16 17
Figure 4.6; Twist
Blinds to Full
Closed
Figure 4.7;
Push and Hold
Programming
Button
Figure 4.4; Twist
Blinds to Full
Open
Figure 4.5;
Push and Hold
Programming
Button
Figure 4.2; Twist
Blinds to Full
Closed
Figure 4.3;
Push and Hold
Programming
Button
18 19
5. Installing the E-Wand on Vertical Blinds
Vertical BLINDS
Installation & Programming
E-WAND
Figure 4.8; Twist
Blinds to Full
Open
Figure 4.9;
Push and Hold
Programming
Button
20 21
back onto the slat attachment carrier by
Figure 5.6; Reattach Vertical Slat
Figure 5.5; Proper Positioning
Figure 5.4; Hook on E-Wand
Figure 5.2; Reinforce vertical slat with
slat reinforcement tape
Figure 5.3; Install Blind Mount
Figure 5.1; Remove rst vertical slat
22 23
Figure 6.2; Twist
Blinds to Full
Closed Left
Figure 6.3;
Push and Hold
Programming
Button
6. PROGRAMMING E-WAND VERTICAL
SLAT POSITIONS
E-Wand from the beginning.
Figure 6.1; Press and Hold Programming
Button
24 25
Figure 6.8; Twist
Blinds to Full
Open
Figure 6.9;
Push and Hold
Programming
Button
Figure 6.6; Twist
Blinds to Full
Closed Right
Figure 6.7;
Push and Hold
Programming
Button
Figure 6.4; Twist
Blinds to Full
Open
Figure 6.5;
Push and Hold
Programming
Button
26 27
7. Set up the Current Products Corp. bridge
with the MyCurtains App
Figure 7.1; Plug in the bridge
Figure 7.2; LED indicators
Connecting the E-Wand to
a zigbee network
About Mesh Networks
28 29
Figure 7.8; Press and release the
programming button quickly three times
E-Wand
Figure 7.9; Device will show up, hit
Register
Figure 7.7; Hit the + to add a device
Figure 7.5; Press and release the
recessed button
Figure 7.6; Scan the QR Code on the
bottom of the bridge
Beach House
Beach House
Figure 7.3; Hit the Bridge Icon
Beach House
Figure 7.4; Hit the Plus (+) Icon
30 31
Figure 8.5; Press and release
programming button three times.
Figure 8.6 -Green LED will ash to
indicate successful pairing.
8. Set up the Current Products Corp. bridge
without the mycurtains app
E-Wands that you are installing in the
Figure 8.1; Plug in the bridge.
Figure 8.2; LEDs will ash red and green,
then turn solid red.
Figure 8.3 - Press and hold the recessed
button on the bottom of the bridge for
5 seconds.
Figure 8.4; LEDs will ash blue, then turn
solid red.
32 33
10. SENSOR FEATURES
MAKING SENSE
OF THE SENSORS
9. SENSOR SWITCH POSITIONS
Off
Fully Automatic
slats around sunset
Semi-Automatic
closes the slats around
only closes the slats
Temperature Sensor Switch
Light Sensor Switch
34 35
12. WHat is A TWIST GROUP?
Figure 13.1; Press and Hold
Programming Button
13. Setting Up a Twist Group
Optional PROGRAMMING
of THE E-Wand
not
11. E-Wand Programming Beeps
36 37
14. REMOVING An E-Wand FROM A TWIST GROUP
until you
15. ADDING An E-Wand TO A TWIST GROUP
on the E-Wand you
press and hold the
again until you hear a
Figure 13.3; Blind Slats will Move
Figure 13.2; Press and Hold
Programming Button
38 39
18. MASTER RESET YOUR E-Wand
until you hear a
16. Setting the Preferred closed position
until the slats reach your desired
on the E-Wand until
17. Realign YOUR E-Wand
until you hear a
19. Remove the E-Wand from a Zigbee network
-
Other manuals for E-WAND
4
Table of contents
Other Current Network Hardware manuals
Popular Network Hardware manuals by other brands
Microseven Systems
Microseven Systems MSHDVS1CHD Product operation manual
Raven
Raven M4x user manual
Digital Watchdog
Digital Watchdog Blackjack NAS user manual
Infinera
Infinera XTM Series Technical description
Cambium
Cambium PTP 450 Configuration and user's guide
Avigilon
Avigilon NVR5-PRM-2NDCPU installation guide
3Com
3Com 3CR870-95-US - OfficeConnect VPN Firewall datasheet
Autonics
Autonics AiS-D Series product manual
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD88DES product manual
Cobalt Digital Inc
Cobalt Digital Inc BlueBox BBG-SDI-TO-IP-10GE-2022 quick start guide
PairGain
PairGain T1L2F10A manual
weBoost
weBoost Drive 4G-S user manual
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD84AAS product manual
Clavister
Clavister SG4500 Series Getting started guide
Speco
Speco NS Series Quick setup guide
Vertex Standard
Vertex Standard eVerge EVX-Link Faqs
Lippert
Lippert OneControl ConnectAnywhere quick start guide
Telebyte
Telebyte 458-LM-E2-36 quick start guide