Curtis D1000GT12A000 User manual

G3 D1000 Series
Twin Airpot Coffee Brewing System
86(5·6*8,'(
5($'$1'6$9(7+(6(,16758&7,216
127,&(72,167$//(5: Please leave this booklet with the machine.
050217
FC29 - D1000, FRONT COVER F-10028 revNC

CONTENTS CL29
.H\)HDWXUHV6SHFLÀFDWLRQV6\VWHP5HTXLUHPHQWV..............................................................................................FS29
,PSRUWDQW6DIHJXDUGV............................................................................................................................................... IS2
,QVWDOODWLRQ,QVWUXFWLRQV*HQHUDO...............................................................................................................................II2
,QVWDOODWLRQ,QVWUXFWLRQV/HYHOLQJ:DWHU6XSSO\(OHFWULFDO ......................................................................................II8
2SHUDWLQJ,QVWUXFWLRQV ............................................................................................................................................OI23
&OHDQLQJ,QVWUXFWLRQV................................................................................................................................................CI1
&OHDQLQJ,QVWUXFWLRQV................................................................................................................................................CI9
3URJUDPPLQJ*XLGH ............................................................................................................................................... 3*
5RXJK,Q'UDZLQJ................................................................................................................................................. 5'
,OOXVWUDWHG3DUWV5HFRPPHQGHG3DUWV.................................................................................................................... ,3
,OOXVWUDWHG3DUWV5HFRPPHQGHG3DUWV7DQN$VVHPEO\9ROW.......................................................................... ,3
,OOXVWUDWHG3DUWV5HFRPPHQGHG3DUWV7DQN$VVHPEO\'XDO9ROWDJH .................................................................. ,3
(OHFWULFDO6FKHPDWLF9ROW..............................................................................................................................(6
(OHFWULFDO6FKHPDWLF'XDO9ROWDJH ......................................................................................................................(6
7URXEOHVKRRWLQJ*XLGH ............................................................................................................................................7*
7URXEOHVKRRWLQJ*XLGH ............................................................................................................................................7*
(UURU&RGHV .............................................................................................................................................................(&
3URGXFW:DUUDQW\....................................................................................................................................................3:
Contact Information
Wilbur Curtis Co., Inc.
6913 Acco Street | Montebello, CA 90640 US
Phone: [phone] | Toll Free: 800-421-6150
Email: [email protected] | Web: www.wilburcurtis.com
'PSUIFMBUFTUTQFDJmDBUJPOTBOEJOGPSNBUJPOHPUPXXXXJMCVSDVSUJTDPN
5PMM'SFF].POEBZ'SJEBZA.M.- 4:00 P.M.PT
Email: [email protected]
%VFUPDPOUJOVFEQSPEVDUJNQSPWFNFOUUIFQSPEVDUTJMMVTUSBUFEQIPUPHSBQIFEJOUIJTHVJEFNBZWBSZTMJHIUMZGSPNUIFBDUVBMQSPEVDU
D1000, CONTENTS LIST 050217NC

KEY FEATURES/SPECIFICATIONS/SYSTEM REQUIREMENTS FS29
Key Features
• Precise Gourmet Control Over All Critical Functions — The G3 Digital Control Module provides you the
expertise to brew premium gourmet coffee with ease.
• #VJMU*O'JOF5VOJOH#SFXJOH.PEFT1SFJOGVTJPOPSQVMTFCSFXFOIBODFTFYUSBDUJPOPGHPVSNFUDPGGFFnBWPS
Cold water brew lockout prevents brewing when water temperature is below set level.
• The Digital Control Module is encapsulated in high-tech polymer and is impervious to heat, steam and
moisture.
• Intuitive Scroll-Through Precision Programming — Large, brightly lighted display communicates functions at a
glance. Easily adjust time, volume, temperature, brew functions and more.
• Two heads are easily programmed independently of each other.
• Industry’s most effective mineral tolerant design.
6SHFLÀFDWLRQV6HOHFWHG0RGHOV
(OHFWULFDO6XSSO\5HTXLUHPHQWV
02'(/ '(6&5,37,21 3+$6( 92/76 $036 +($7,1*&21),* :,5( :$776 +(57= *$/+5
'*7$ Twin brewer 1 PH 220 V 23.2 A 2 x 2500 W 3W + G 5100 W 50/60 Hz 14.0
'*+$ Twin brewer, tall 1 PH 220 V 23.2 A 2 x 2500 W 3W + G 5100 W 50/60 Hz 14.0
'*7$ Twin brewer, dual voltage 1 PH 120/220 V 15/12.7 A 2 x 1600 W 2W/3W + G 1800/2800 W 50/60 Hz 5.0/8.0
'*+$ Twin brewer, dual voltage, tall 1 PH 120/220 V 15/12.7 A 2 x 1600 W 2W/3W + G 1800/2800 W 50/60 Hz 5.0/8.0
'LPHQVLRQV :DWHU6XSSO\5HTXLUHPHQWV
02'(/ +(,*+7 :,'7+ '(37+ 6+,3:(,*+7 6+,3&8%( :$7(5&211(&725 :$7(535(6685( 0,1)/2:5$7(
'*7$ 26.00” 18.13” 20.00” 53.0 lbs 8.78 cu ft µÁDUH
20 - 90 psi 1.0 gpm
'*+$ 29.25” 18.13” 20.00” 59.0 lbs 8.78 cu ft µÁDUH 20 - 90 psi 1.0 gpm
'*7$ 26.00” 18.13” 20.00” 53.0 lbs 8.78 cu ft µÁDUH 20 - 90 psi 1.0 gpm
'*+$ 29.25” 18.13” 20.00” 60.0 lbs 8.78 cu ft µÁDUH 20 - 90 psi 1.0 gpm
D1000 KEY FEATURES/SPECS/SYSTEM REQUIREMENTS 050217NC
Following are the factory default settings for the D1000 brewer:
• Energy Save Mode = Off• Brew Temperature = 200°F
• Brew Volume = 74oz. (2.2L)

IMPORTANT SAFEGUARDS IS2
Symbols
This is the safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury or death.
DANGER - Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING - Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION - Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE - Indicates a situation which, if not avoided, could result in property damage.
IMPORTANT - Provides information and tips for proper operation.
SANITATION REQUIREMENTS
Important Safeguards/Conventions
WARNING:
• Make sure that this appliance is installed and grounded according to the INSTALLATION
*/4536$5*0/4CZRVBMJmFEQFSTPOOFMCFGPSFBUUFNQUJOHUPVTFJU'BJMVSFUPGPMMPXUIF*/45"--"5*0/
INSTRUCTIONS could result in personal injury or void the warranty.
• This appliance is designed for commercial use. Any service other than cleaning and preventive
maintenance should be performed by an authorized Wilbur Curtis service technician.
• 5PSFEVDFUIFSJTLPGmSFPSFMFDUSJDTIPDL%0/05PQFOUIFTFSWJDFQBOFMT5IFSFBSFOPVTFS
serviceable parts inside.
• Keep hands, arms and other items away from hot surfaces of the unit during operation.
• Clean the appliance and any dispensers completelyCFGPSFVTJOHUIFNGPSUIFmSTUUJNFBTBDDPSEJOHUP
the CLEANING INSTRUCTIONS. Clean them regularly as instructed in the CLEANING INSTRUCTIONS.
• Use this appliance only for its intended use, brewing/dispensing hot and/or cold beverages/water.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Avoid spillage onto the power (mains) connector.
$0''&&5&"#3&8&34*.1035"/54"'&(6"3%44:.#0-4 %

IMPORTANT SAFEGUARDS IS2
$0''&&5&"#3&8&34*.1035"/54"'&(6"3%44:.#0-4 %
CE Requirements
• This appliance must be installed in locations where it can be overseen by trained personnel.
• 'PSQSPQFSPQFSBUJPOUIJTBQQMJBODFNVTUCFJOTUBMMFEXIFSFUIFUFNQFSBUVSFJTCFUXFFO¡$UP¡$
• "QQMJBODFTIBMMOPUCFUJMUFENPSFUIBO¡GPSTBGFPQFSBUJPO
• "OFMFDUSJDJBONVTUQSPWJEFFMFDUSJDBMTFSWJDFBTTQFDJmFEJODPOGPSNBODFXJUIBMMMPDBMBOEOBUJPOBMDPEFT
'PSTBGFVTFBOBMMQPMFEJTDPOOFDUJPONVTUCFJODPSQPSBUFEJOUPUIFmYFEXJSJOHJOBDDPSEBODFXJUIUIF
XJSJOHSVMFTPVUMJOFEJODMBVTFPG*&$GPSNFFUJOHUIFNJOJNVNFMFDUSJDBMTBGFUZPGUIJTTUBOEBSE
• This appliance must not be cleaned by water jet.
• 5IJTBQQMJBODFDBOCFVTFECZQFSTPOTBHFEGSPNZFBSTBOEBCPWFJGUIFZIBWFCFFOHJWFOTVQFSWJTJPOPS
instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
• ,FFQUIFBQQMJBODFBOEJUTDPSEPVUPGSFBDIPGDIJMESFOBHFEMFTTUIBOZFBST
• "QQMJBODFTDBOCFVTFECZQFSTPOTZFBSTBOEBCPWFXJUISFEVDFEQIZTJDBMTFOTPSZPSNFOUBMDBQBCJMJUJFT
or lack of experience and knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
• $IJMESFOVOEFSUIFBHFPGZFBSTTIPVMECFTVQFSWJTFEUPFOTVSFUIFZEPOPUQMBZXJUIUIFBQQMJBODF
• If the power cord is ever damaged, it must be replaced by the manufacturer or authorized service personnel
with a special cord available from the manufacturer or its authorized service personnel in order to avoid a
hazard.
• Machine must not be immersed for cleaning.
• $MFBOJOHBOEVTFSNBJOUFOBODFTIBMMOPUCFNBEFCZDIJMESFOVOMFTTUIFZBSFPMEFSUIBOZFBSTBOE
supervised.
• This appliance is intended to be used in household and similar applications such as:
 oTUBGGLJUDIFOBSFBTJOTIPQTPGmDFTBOEPUIFSXPSLJOHFOWJSPONFOUT
 oCZDMJFOUTJOIPUFMTNPUFMTBOEPUIFSSFTJEFOUJBMUZQFFOWJSPONFOUT
– bed and breakfast type environments.
• This appliance not intended to be used in applications such as:
– farm houses
• Access to the service areas permitted by Authorized Service personnel only.
• 5IF"8FJHIUFETPVOEQSFTTVSFMFWFMJTCFMPXE#"

INSTALLATION INSTRUCTIONS II2
Installation Instructions
Installation Requirements
• A secure surface capable of supporting the weight of the appliance.
• For units without an attached cord set: Appropriately sized, UL listed, grounding type power cable to meet
UIFFMFDUSJDBMTQFDJmDBUJPOTGPSUIFBQQMJBODF*GZPVIBWFRVFTUJPOTBCPVUUIFDPSSFDUDBCMFTJ[FBOEMFOHUI
DPOTVMUBRVBMJmFEJOTUBMMFS*GUIFBQQMJBODFXJMMCFIBSEXJSFEUPBKVODUJPOCPYUIFQPXFSDBCMFNVTUCFMPOH
enoughTPUIBUUIFVOJUDBOCFNPWFEGPSDMFBOJOHVOEFSOFBUI
• "HSPVOEFEFMFDUSJDBMDPOOFDUJPOUPBOFMFDUSJDBMDJSDVJUUIBUNFFUTUIFFMFDUSJDBMTQFDJmDBUJPOTPGUIF
appliance (see SPECIFICATIONS5IFDJSDVJUNVTUCFQSPUFDUFECZUIFBQQSPQSJBUFTJ[FEDJSDVJUCSFBLFS*G
ZPVBSFOPUDFSUBJOUIBUUIFFYJTUJOHDJSDVJUNFFUTUIFSFRVJSFNFOUTGPSZPVSVOJUDPOTVMUBMJDFOTFEFMFDUSJDJBO
• "XBUFSmMUSBUJPOTZTUFNJTSFRVJSFEUPNBJOUBJOUSPVCMFGSFFPQFSBUJPO8JMCVS$VSUJT$P*ODSFDPNNFOETB
8JMCVS$VSUJTBQQSPWFEXBUFSmMUFS7JTJUwww.wilburcurtis.comUPTFFUIFGVMMMJOFPG8JMCVS$VSUJTBQQSPWFE
XBUFSmMUFST
• 1PUBCMFXBUFSTVQQMZMJOFDPOOFDUJPOGSPNUIFXBUFSmMUFSDBQBCMFPGTVQQMZJOHUIFNJOJNVNnPXSBUFSFRVJSFE
CZUIFTQFDJmDBUJPOT5IFXBUFSTVQQMZMJOFNVTUCFBCMFUPDPOOFDUUPUIFnBSFmUUJOHPOUIFCBDLPGUIF
unit. See the SPECIFICATIONS section for the correct size. The water line should also be capable of being
DPOUSPMMFECZBTIVUPGGWBMWF%POPUDPOOFDUUIFXBUFSMJOFUPBTBEEMFWBMWF
/4'*OUFSOBUJPOBMSFRVJSFTUIFGPMMPXJOHXBUFSDPOOFDUJPO
1 "RVJDLEJTDPOOFDUPSBEEJUJPOBMDPJMFEUVCJOHBUMFBTUUXPUJNFTUIFEFQUIPGUIFapplianceJTSFRVJSFE
 TPUIBUJUDBOCFNPWFEGPSDMFBOJOHVOEFSOFBUI
2 5IJTFRVJQNFOUJTUPCFJOTUBMMFEXJUIBEFRVBUFCBDLnPXQSPUFDUJPOUPDPNQMZXJUIBQQMJDBCMF
federal, state and local codes.
 8BUFSQJQFDPOOFDUJPOTBOEmYUVSFTEJSFDUMZDPOOFDUFEUPBQPUBCMFXBUFSTVQQMZTIBMMCFTJ[FE
installed and maintained in accordance with federal, state and local codes.
WARNING:*OTUBMMBUJPOJTUPCFQFSGPSNFEPOMZCZBRVBMJmFEJOTUBMMFS
WARNING: *NQSPQFS FMFDUSJDBM DPOOFDUJPO NBZ SFTVMU JO BO FMFDUSJD TIPDL IB[BSE 5IJT CSFXFS NVTU CF
properly grounded.
NOTICE:%0/05DPOOFDUUIJTCSFXFSUPBIPUXBUFSTVQQMZ5IFXBUFSJOMFUWBMWFJTOPUSBUFEGPSIPUXBUFS
%POPUFYDFFEUIFNBYJNVNXBUFSQSFTTVSFTUBUFEJOUIFSPECIFICATIONS section.
IMPORTANT:0CTFSWFBMMHPWFSOJOHDPEFTBOEPSEJOBODFT
#3&8&34(&/&3*$*/45"--"5*0/*/4536$5*0/4 #
5IF*OUFSOBUJPOBM1MVNCJOH$PEFPGUIF*OUFSOBUJPOBM$PEF$PVODJMBOEUIF'PPEBOE%SVH"ENJOJTUSBUJPO
'%"'PPE$PEFNBOVBMEJSFDUUIBUUIJTFRVJQNFOUNVTUCFJOTUBMMFEXJUIBEFRVBUFCBDLnPXQSFWFOUJPO
in compliance with federal, state and local codes. For units installed outside of the U.S.A., make sure that
the installation is in compliance with the applicable plumbing/sanitation code for your area.

Installation
Leveling
1 Position the brewer on the counter top. Level it left to
right and front to back by turning the bottom of the
legs.
Connect the Water Supply
2 Flush the water supply line prior to installation to
QVSHFBJSBOEEFCSJTGSPNUIFXBUFSmMUFSBOEUVCJOH
3 $POOFDUUIFXBUFSTVQQMZMJOFUPUIFnBSFmUUJOHPO
the back of the brewer. Leave the water supply valve
closed until the power is connected.
Connect the Brewer Wiring
Brewers Without A Cord Set Attached
4 Remove the screws that hold the front cover in place
and remove the cover.
5 Loosen the strain relief on the back of the brewer.
6 On dual voltage units being operated at 220 Volts
(nominal) disconnect the existing power cable from
the terminal block and remove.
7 Feed the 220 Volt power cable into the brewer.
8 On dual voltage units being operated at 220 Volts,
disconnect and cap the jumper wire between the “C”
and “N” terminals on the terminal block.
9 Connect the wires on the power cable to the terminal
block inside the brewer.
10 Tighten the strain relief and replace the front cover.
11 Connect the power cable wires to the terminals in the
junction box. See the ELECTRICAL SCHEMATIC for
the power supply requirements.
INSTALLATION INSTRUCTIONS II8
DECANTER/DISPENSER BREWERS, INSTALLATION INSTRUCTIONS 080516NC
WARNING: Use the leveling legs to level the
brewer only. Do not use them to adjust brewer
height. Do not extend them higher than necessary.
Front
panel
WARNING: Turn off power to the junction box at
the circuit breaker panel before connecting the
power cable to the brewer.
Terminal
block

Brewers With A Cord Set Attached
12 Connect the power cord to the appropriate electrical
outlet.
Connect the Bag-in-Box (BIB) Sweetener -
Units Equipped for Brewing Sweet Tea Only
13 Connect two Bag-in-Box (BIB) sweeteners to the
brewer sweetener supply hoses as instructed in the
OPERATING INSTRUCTIONS section. Connecting two
bags allows the brewer to continue operating if one
bag runs out.
Power Up the Brewer
14 Turn on the water supply valve.
15 Make sure that the circuit breaker supplying power to
the unit is on.
16 Turn the toggle switch on the back of the brewer to the
0/QPTJUJPO5IFXBUFSUBOLXJMMTUBSUUPmMM8IJMFUIF
UBOLJTmMMJOHJOTQFDUUIFXBUFSTVQQMZMJOFGPSMFBLT
17 When the water in the tank rises to the correct level, the
heating elements will turn on automatically. Depending
on the incoming water temperature and the electrical
TQFDJmDBUJPOTUIFXBUFSUBOLUZQJDBMMZSFRVJSFTUP
minutes to reach the factory set operating temperature.
When the water has heated, Ready to brew will be
displayed on the LCD screen.
18 Perform a brew cycle of a least 12 ounces to purge
any remaining air from the system. See OPERATING
INSTRUCTIONS. During the initial brew cycle and
XIFOFWFSUIFmMUFSJTSFQMBDFEZPVNBZIFBSUIF
TPVOETPGBJSCFJOHQVSHFEGSPNUIFmMUFSUVCJOHBOE
water tank.
INSTALLATION INSTRUCTIONS II8
DECANTER/DISPENSER BREWERS, INSTALLATION INSTRUCTIONS 080516NC
Connect the Brewer Wiring (cont.)
WARNING: Connect the power cord to the
appropriate type and size electrical outlet. If the
electrical outlet is not compatible with the power
cord, have it upgraded by a licensed electrician. Do
not modify the power plug. Do not use an extension
cord. Do not use a power cord/plug that is damaged.
IMPORTANT: When operating the brewer at
higher elevations, reduce the operating
temperature by 2°F for each 1000 feet of
elevation. See PROGRAMMING GUIDE.

OPERATING INSTRUCTIONS OI23
G3 AIRPOT BREWER, OPERATING INSTRUCTIONS 050217NC
Brewing Instructions
2 Center an empty airpot under
the brew basket.
3 *OTFSUBDMFBOQBQFSmMUFSJOUP
the brew basket.
4 Fill with the proper amount
of ground coffee. Level the
DPGGFFJOUIFmMUFS
5 4MJEFUIFmMMFECSFXCBTLFU
into the brew rails under the
control panel. Slide it all the
way back until it stops.
The brewer will brew coffee based on the settings programmed into the universal control module (UCM). To
change the settings, see the PROGRAMMING GUIDE section.
1 The brewer should be ON.
$POmSNUIJTBUUIFSFBSUPHHMF
switch. “Ready to brew”
should be on the display. If
the brewer is connected to an
inter-lock grinder, the grinder
should be on. When inter-lock
connection is made, grind
coffee at this time.
6 Press the brew button. Brewing
will begin immediately.
WARNING - TO AVOID SCALDING, AVOID SPLASHING. Keep body parts clear of the brewer during
brewing. Do not remove the brew basket while “Brewing” appears on the display.
The G3 Brewer is factory preset for optimal performance.

NOTICE - Do not use cleaning liquids, compounds or powders containing chlorine (bleach) or corrosives.
5IFTFQSPEVDUTQSPNPUFDPSSPTJPOBOEXJMMEBNBHFUIFmOJTIFT USE OF THESE PRODUCTS WILL VOID
THE WARRANTY.
CLEANING INSTRUCTIONS CI1
Cleaning The Brewer - Daily
BREWERS - GENERIC, CLEANING INSTRUCTIONS 080416B
WARNING: HOT SURFACES - To avoid injury, allow the brewer and dispenser(s) to cool before cleaning.
The brewer should be OFF.5VSOUIFCSFXFSPGGCZnJQQJOHUIFSFBSUPHHMFTXJUDIUPUIF0''QPTJUJPO
1 Remove the dispenser(s). Wipe exterior brewer surfaces with a damp cloth to remove spills and debris.
2 Remove the brew basket(s) and clean them in a mild detergent solution. Use a soft bristled brush for hard to
clean areas. Rinse with clean water, then dry.
3 Wipe the spray head area with a cloth soaked in a mild detergent solution. Rinse with a cloth soaked with
clean water removing any residual detergent. Use a clean, soft cloth to dry.
4 Dump out the drip tray(s) (if applicable). Rinse with clean water, then dry with a soft, clean cloth.
Cleaning The Brewer - Weekly
The brewer should be OFF.5VSOUIFCSFXFSPGGCZnJQQJOHUIFSFBSUPHHMFTXJUDIUPUIF0''QPTJUJPO
1 Remove the spray head(s), unscrewing counterclockwise from the dome plate.
2 Thoroughly clean and rinse the dome plate area.
3 Clean the brew basket rails with a brush soaked with a mild detergent solution. Rinse the area with a cloth
soaked with clean water, removing any residual detergent.
4 Dry the area with a soft, clean cloth.
5 Reattach the spray head(s).
WARNING: DO NOT immerse the brewer in water or any other liquid.

Cleaning the Airpot/Pour Pot (Daily)
CLEANING INSTRUCTIONS CI9
10631054"*31054$-&"/*/(*/4536$5*0/4ø "
WARNING: DO NOT immerse the airpot/pour pot or lid assembly in water or any other liquid. Do not place the
airpot/pour pot or lid in a dishwasher. Placing a airpot or pour pot in a dishwasher will void the warranty.
Cleaning Airpots
 Wash - Wipe the exterior surfaces of the airpot and
lid with a sponge soaked with the detergent solution
to remove spills and debris. Fill the liner with the
detergent solution. Use a sponge cleaning brush to
clean inside. Clean the spout/siphon tube with the
detergent solution.
2 Rinse - Rinse the airpot and the spout/siphon tube
with clean, warm water.
 Sanitize - Sanitize the interior of the airpot, the
spout/siphon tube and the lid, using a commercial
sanitizer suitable for food grade applications. Swab,
brush or pressure spray the sanitizing solution
according to the directions on the package.
4 Air Dry - Turn the airpot and lid upside down.
Allow all parts to air dry.
Cleaning Pour Pots
 Wash - Wipe the exterior surfaces of the pour pot
and lid with a sponge soaked with the detergent
solution to remove spills and debris. Fill the liner with
the detergent solution. Use a sponge cleaning brush
to clean inside.
2 Rinse - Rinse the pour pot and the lid with clean,
warm water.
 Sanitize - Sanitize the interior of the pour pot and
the lid, using a commercial sanitizer suitable for
food grade applications. Swab, brush or pressure
spray the sanitizing solution according to the
directions on the package.
4 Air Dry - Turn the pour pot and lid upside down
and allow to air dry.
Start by preparing a mild solution of detergent and warm water. Remove the airpot/pour pot from the brewer and
remove/open the lid. On airpots, remove the nozzle assembly. Rinse.
Nozzle
assembly
TLXA2201G000 shown. Appearance and size varies
with model number.
CLXP6401S100 shown. Appearance and size varies
with model number.
NOTE: The stem on the bottom of TFT series pour pot lids have a built-in sensor used for the FreshTrac
feature. Keep this stem free from coffee oil build-up for proper operation. After cleaning, inverting the lid
GPSTFDPOETSFTFUTUIF'SFTI5SBDUJNFS

PROGRAMMING GUIDE PG8
With unit OFF, press and hold
bottom right BREW button (4).
Then press and release
ON/OFF button. Continue to
hold down BREW button until
Enter Code appears.
Enter 4 digit code.
(factory default = 1-2-3-4)
Curtis
Entering
Programming mode
Enter Code
- - - -
To enter programming mode:
<Program Menus>
ÅSelect Æ
Brew by Volume
ÅSelect Æ
Brew by Time
ÅSelect Æ
Pre-Infusion
ÅSelect Æ
PulseBrew On/Off
ÅSelect Æ
Drip-Out Mode
ÅSelect Æ
Temperature
ÅSelect Æ
Energy Save Mode
ÅSelect Æ
Brew Count Odom.
ÅSelect Æ
Brew Count Total
ÅSelect Æ
Cold Brew Lock
ÅSelect Æ
Master Reset
ÅSelect Æ
Service Call
ÅSelect Æ
Access Code
ÅSelect Æ
Banner Name
ÅSelect Æ
P-Maintenance
ÅSelect Æ
Beeper On/Off
ÅSelect Æ
Displ. Brew Time
ÅSelect Æ
Display Messages
ÅSelect Æ
Model Select
ÅSelect Æ
Exit
ÅSelect Æ
WC-785/WC-789, PROGRAMMING GUIDE 050217NC
IMPORTANT: All programming functions are performed with the
three center buttons.
The symbols below the buttons are:
 Ż Scroll UP (1)
~SELECT or ENTER to save new parameter (2)
ŹScroll DOWN (3)
Once you enter programming mode, press Żor Źto scroll UP or DOWN
through the various functions/features. Press ~(Select) to make changes
to the function/feature displayed. Then press Żor Źto scroll through
the various available settings. See Programming Options for detailed
descriptions.

Programming Options
4FFUIFmSTUQBHFPGUIFQSPHSBNNJOHHVJEFGPSJOTUSVDUJPOTPOBDDFTTJOHFBDIJOEJWJEVBMNFOVJUFN
Some menus save and exit automatically when a parameter is updated. Other menus exit to the previous menu
when a parameter is saved. To exit, press Źuntil EXIT appears on the display, then press ~.
Brew by Volume - adjusts the volume brewed (the factory default is 74 oz (2.2L). With an empty airpot in
place, press the appropriate BREW button. When the desired volume is reached, press the same BREW
button again to stop the brew cycle and set the volume.
Brew by Time - adjusts the amount of coffee brewed by time rather than by volume (the factory default is
3min-0sec). Once accessed, press Żor ŹVOUJMUIFOVNCFSPGNJOVUFTJTnBTIJOH5IFOQSFTT~repeatedly
to change the number value. Press Żor ŹVOUJMUIFOVNCFSPGTFDPOETJTnBTIJOH5IFOQSFTT~repeatedly
to change the number value. Press Żor ŹVOUJMiFYwJTnBTIJOHUIFOQSFTT~to exit.
Temperature - sets the brewing temperature of the water held in the water tank (the factory default is 200ºF).
The range is 170ºF to 206ºF. Once accessed, press Żor Źto choose the desired temperature. Then press ~
to set and exit.
Energy Save Mode - saves energy during periods when the brewer is not in use (the factory default is
OFF). When set to ON, the brewer automatically shuts off two hours after the last brew cycle. Press the ON/
OFF button to return to normal operation. When set to ON 140ºF, the brewer shuts off two hours after the last
brew cycle, but the water tank temperature remains at 140ºF. Use the ON 140ºF setting to reach brewing
temperature faster after periods of non-use. Once accessed, press Żor Źto choose the desired setting.
Then press ~to set and exit.
Brew Count Odom - When accessed, this feature displays the total brew cycles since the odometer was last
reset. Press Żto exit or ~reset and exit.
Pre-Infusion - sets the brewer Pre-Infusion time (Pulse Brew must be off to access, the factory default is
Disabled). Pre-Infusion increases control of coffee clarity and extraction. When turned on, the range is 10 to 60
seconds. Once accessed, press Żor Źto choose the desired setting, then, press ~to exit. To turn off pulse
brew mode, choose 0 for the time.
When Pre-infusion is ON, Pulse Brew disappears from the list of menu items.
Brew Count Total - when accessed, displays the total brew cycles on the brewer. It cannot be reset. The
display returns to the previous screen automatically after a few seconds.
Cold Brew Lock - adjusts the temperature at which the brewer will brew coffee when the BREW button is
pressed (Ready to Brew appears on the display, the factory default is 5ºF). This feature also adjusts the
temperature at which the heating element turns on to reheat the water in the tank. The available settings
are 5°F, 15°F and OFF. OFF is within 30°F below the temperature setting. Once accessed, press Żor Źto
choose the desired setting. Then press ~to set and exit.
Master Reset - resets the brewer universal control module (UCM) to the factory default settings. Once
accessed, “Are You Sure?” will appear on the display. Press Żfor Yes or Źfor No.
Service Call - sets the service phone number that appears on the display when the UCM detects a SENSOR
ERROR or WATER ERROR . Once accessed, press Żor Źto choose the number to be changed. Then press
~repeatedly to change the number value. Press Żor Źto choose the next number to change or choose exit
and press ~.
PROGRAMMING GUIDE PG8
WC-785/WC-789, PROGRAMMING GUIDE 050217NC

PROGRAMMING GUIDE PG8
Programming Options (cont.)
Access Code - sets the access code entered to access programming mode (the factory default is 1-2-3-4).
Once accessed, press Żor Źto choose the number to change. Then press ~repeatedly to change the
number value (range is 1 to 4). Press Żor Źto choose the next number to change or choose exit and
press ~.
Banner Name - changes the banner name that appears on the display (the factory default is Curtis). No
banner name appears when all blanks are entered. Once accessed, press Żor Źto choose the letter to
change. Then press ~repeatedly to change the number value. Press Żor Źto choose the next number to
change or choose ex and press ~to exit.
P-Maintenance - turns on/off and adjusts the P-Maintenance (preventive maintenance) brew monitor
(the factory default is OFF). When ON, the UCM measures the number of gallons brewed before the
P-Maintenance reminder appears on the display. The range is OFF to 9500 gallons. Once accessed, press Ż
or Źto choose the desired setting, then, press ~to exit.
Beeper On/Off - turns the beeper that is heard each time a button is pressed on or off (the factory default is
ON). Once accessed, press Żor Źto choose the desired setting. Then, press ~to exit.
Pulse Brew - selects the pulse brew pattern (Pre-Infusion must be off to access, the factory default is C). The
QVMTFCSFXQBUUFSOTFMFDUFEiUVOFTwPSDIBOHFTUIFnBWPSPGUIFDPGGFF0ODFBDDFTTFEQSFTTŻor Źto
choose the desired setting. Then, press ~to exit.
When Pulse Brew is on, Cold Brew Lock is set within 5ºF and, Cold Brew Lock and Pre-Infuson
disappear from the list of program selections.
Pulse Brew Guidelines
• Filter pack type coffees typically extract better with the A and B pulse setting.
• Decaffeinated coffees typically extract better with the B pulse setting.
• High-yield coffees typically extract better with the C pulse setting. Of course, any of the A, B or C
TFUUJOHTNBZCFVTFEUPTVJUZPVSUBTUFQSPmMF
• Settings D and E are manual pulse counts.
Display Brew Time - turns the display of the brew time during brewing on or off (the factory default is ON).
Once accessed, press Żor Źto choose the desired setting, then press ~to exit.
Drip-out Mode - TFUTUIFESJQPVUNPEFUJNFS"GUFSXBUFSTUPQTnPXJOHJUBMMPXTBEEJUJPOBMUJNFGPSUIFXBUFS
to drain from the brew basket before the brew basket lock releases (the factory default is 2 min.). This feature
reduces the chance that the brew basket will be removed too early. The range is OFF to 5 minutes. Once
accessed, press Żor Źto choose desired setting, then, press ~to exit.
Display Messages - turns display of the message “Rinse Server Before Brewing” ON or OFF (the factory
default is ON). Once accessed, press Żor Źto choose the desired setting, then press ~to exit.
Model Select - changes the model number and number of batches (to match the label on the universal control
module, the factory default is D1000GT). Once accessed, press Żor Źuntil the model number matching the
model number label on the brewer appears, then press ~. Press Żor Źuntil the number of batches matches
the number of batch sizes on the UCM label, then press ~to exit.
WC-785/WC-789, PROGRAMMING GUIDE 050217NC

ROUGH-IN DRAWINGS RD35
D1000 Airpot Coffee Brewers
D1000, ROUGH-IN DRAWING 050217NC
D1000GH
29.25 in
[74.3 cm]
D1000GT
19.63 in
[49.8 cm]
D1000GH
26.38 in
[67.0 cm]
D1000GT
14.88 in
[37.8 cm]
D1000GT
13.88 in
[35.2 cm]
D1000GT
26.00 in
[66.0 cm]
D1000GH
22.88 in
[58.1 cm] D1000GT
23.13 in
[58.7 cm]
D1000GH
18.13 in
[46.0 cm]
D1000GH
17.13 in
[43.5 cm]
2.50 in
[6.4 cm]
20.00 in
[50.8 cm]
18.13 in
[46.0 cm]
16.88 in
[42.9 cm]
Water
Supply
16.50 in
[41.9 cm]
with WC-3316 brew basket with WC-3338 brew basket

ILLUSTRATED PARTS LIST IP51
D1000, ILLUSTRATED PARTS/RECOMMENDED PARTS 053117A
Supplies and Accessories - All Models
CAB-1 - Cleaning BrushWC-29025 - Spray Head
11A
11B
8
23
9
26
9
29
5
27
20
21
13
19
15
14
3
24
28
10
25
2
12A
12B
16A
16B
7A
7B
4A
4B
4A
4B
31A
31B
31A
31B
32A
32B
32A
32B
1
17
22
17
B
D1000GT/ D1000GH - Main Chassis - Exploded View
Water tank assemblies:
- 220 Volt, see section IP52
- Dual Voltage, see section IP53
B
18
30
6
A

ILLUSTRATED PARTS LIST IP51
D1000, ILLUSTRATED PARTS/RECOMMENDED PARTS 053117A
ITEM # PART # DESCRIPTION
1 WC-817 VALVE, DUMP RIGHT 120V 12W W/RECTIFIER
AP/GEM
2 WC-889 VALVE, DUMP LEFT 120V 12W ALPHA’S/D1000/
GEM-12/TLP
3 WC-3518 LEG, GLIDE 3/8”-16 STUD SCREW
4A WC-2962KaKIT, FITTING SPRAYHEAD SS
4B WC-2962-101KbKIT, FITTING SPRAYHEAD KYNAR
5 WC-314 POWER BLOCK, 5 STATION
6 WC-3763 KIT, DUMP VALVE FOR DELTROL WC-
820WDR,WC-821WDR, WC-844WDR
7A WC-785 CONTROL MODULE, UCM 120V D1000 GT/
D500GT 2 BATCH
7B WC-37177 KIT, UCM & LABEL OVERLAY D1000GT
(INCLUDES ITEM 8)
8 WC-39430 LABEL, UCM OVERLAY INNER D1000GT
9 WC-29025 SPRAYHEAD, PURPLE ADVANCE FLOW
10 WC-8560 HEATSINK, ASSY 1PH GEM612ILD GEM-12D/
TL9002-10/D1000AP/T
11A WC-3316 BREW CONE, W/HANDLE ASSY 7.1”D.W/WC-
3317 & WC-3323 ALP/AP
11B WC-3338 BREW CONE, W/HANDLE ASSY 6.7”D DLX WC-
3314 & WC-3313
12A WC-5847 1COVER, FRONT D1000AP
12B WC-5848 2COVER, FRONT D1000GH TALL
13 WC-2401K KIT, ELBOW 3/8 NPT X 1/4 FLARE
14 WC-1412 CORD GRIP, 3/4” FOR METAL CORD TO .81”OD
15 WC-1200 2CORD, 14/3 SJTO 6’ BLK W/PLUG
16A WC-13273 1HARNESS, ASSY D1000GT 220V
16B WC-13285 2HARNESS, ASSY D1000GT DV 120/220
ITEM # PART # DESCRIPTION
17 WC-29044 SLEEVE, OVERFLOW ASSY GEN USE
18 WC-3765L KIT, INLET VALVE REPAIR USE ON WC-826/WC-
826L/WC-847 (OLDER UNITS)
19 WC-847 VALVE, INLET 2 GPM 120V 10W GEN USE
BROWN BODY
20 WC-5310 TUBE, 5/16 ID x 1/8W SILICONE GEN USE
21 WC-5231 COMPOUND, SILICONE 5 OZ
22 WC-103 SWITCH, TOGGLE NON-LIT DPST 25A
125/250VAC RESISTIVE
23 WC-5421 COVER, TOP SS GEM-12D GEM-
612ILD,TL9002,312IL
24 WC-3503 LEG, 3/8”-16 STUD SCREW BUMPER
25 WC-1809 FAUCET, PS/HPS SERIES HOT WTR 1/2-20 UNF
AP/ALP
26 WC-6221 GRID, DRIP TRAY SS C250/500/ 1000/
TL9001/9002/SCTL9002 (OPTIONAL)
27 WC-39396
LABEL, UCM OVERLAY DUAL D1000GT/H
CURTIS LOGO (INCLUDES INNER AND OUTER
LABEL)
28 WC-8591 CAPACITOR, X2 USED ON ALL ADS MODELS
29 WC-1806 SEAT CUP, SILICONE USE ON WC-1809 FAUCET
30 WC-830 FLOW WASHER, 1.0 GPM 1/2” DIA. USE ON
WC-826
31A WC-4320 aO’RING, 0.487I.D.x 0.693OD x0.103CS BUNA-N
#112
31B WC-43089 bGASKET, 1.00OD X .625 I.D. X .030 THK WHITE
EPDM 70 SHORE
32A WC-4213 aNUT, 5/8 LOCK PLATED
32B WC-4212-02 bNUT, 5/8-18 JAM PLASTIC
D1000GT/ D1000GH - Main Chassis - Parts List
ITEM # PART # DESCRIPTION
1 WC-817 VALVE, DUMP RIGHT 120V 12W W/RECTIFIER
AP/GEM
2 WC-889 VALVE, DUMP LEFT 120V 12W ALPHA’S/D1000/
GEM-12/TLP
6 WC-3763 KIT, DUMP VALVE FOR DELTROL WC-
820WDR,WC-821WDR, WC-844WDR
7B WC-37177 KIT, UCM & LABEL OVERLAY D1000GT
(INCLUDES ITEM 8)
9 WC-29025 SPRAYHEAD, PURPLE ADVANCE FLOW
18 WC-3765L KIT, INLET VALVE REPAIR USE ON WC-826/WC-
826L/WC-847 (OLDER UNITS)
ITEM # PART # DESCRIPTION
19 WC-847 VALVE, INLET 2 GPM 120V 10W GEN USE
BROWN BODY
20 WC-5310 TUBE, 5/16 ID x 1/8W SILICONE GEN USE
21 WC-5231 COMPOUND, SILICONE 5 OZ
22 WC-103 SWITCH, TOGGLE NON-LIT DPST 25A
125/250VAC RESISTIVE
28 WC-8591 CAPACITOR, X2 USED ON ALL ADS MODELS
D1000GT/ D1000GH - Recommended Parts to Stock
1D1000GT, 2D1000GH
a8QLWVEXLOWDQGODWHU6WDLQOHVVVWHHOÀWWLQJNLW$LVFRPSDWLEOHZLWKROGHUXQLWV
bUnits built before 05/15/17.

ILLUSTRATED PARTS/RECOMMENDED PARTS IP52
WC-75285 TANK ASSEMBLY, ILLUSTRATED PARTS/RECOMMENDED PARTS 050217C
ITEM # PART # DESCRIPTION
1 WC-75285 TANK, COMPLETE D1000GT/H W/ULTEM FITTINGS
2 WC-37008 KIT, TANK LID ROUND (INCLUDES GASKET)
3 WC-43055 GUARD, SHOCK RESET THERMOSTAT (WC-522)
4 WC-5527K KIT, PROBE WATER LEVEL O-RING & NUT
5 WC-934-04 KIT,ELEMENT HEATING 2.5KW 220V W/ JAM NUT &
SILICONE WASHERS
6 WC-1438-101 SENSOR, TEMPERATURE TANK
ITEM # PART # DESCRIPTION
2 WC-37008 KIT, TANK LID ROUND (INCLUDES GASKET)
3 WC-43055 GUARD, SHOCK RESET THERMOSTAT (WC-522)
4 WC-5527K KIT, PROBE WATER LEVEL O-RING & NUT
5 WC-934-04 KIT,ELEMENT HEATING 2.5KW 220V W/ JAM NUT &
SILICONE WASHERS
6 WC-1438-101 SENSOR, TEMPERATURE TANK
WC-75285 - Recommended Parts to Stock
ITEM # PART # DESCRIPTION
8 WC-522 THERMOSTAT, HI LIMIT HEATER CONTROL DPST
277V 40A
9 WC-37365 KIT, FITTING TANK INLET
10 WC-37266 KIT, FITTING TANK OVERFLOW
11 WC-37317 KIT, STRAIGHT FITTING & BUSHNG 8MM GEN USE
ITEM # PART # DESCRIPTION
7 WC-4382 GUARD, SHOCK HTNG ELMNT DOUBLE
8 WC-522 THERMOSTAT, HI LIMIT HEATER CONTROL DPST
277V 40A
9 WC-37365 KIT, FITTING TANK INLET
10 WC-37266 KIT, FITTING TANK OVERFLOW
11 WC-37317 KIT, STRAIGHT FITTING & BUSHNG 8MM GEN USE
WC-75285 - Tank Assembly
2
10
11
7
6
3
8
4
11
11
5
1
9
WC-75285 - Tank Assembly - Parts List

ILLUSTRATED PARTS/RECOMMENDED PARTS IP53
WC-75284 TANK ASSEMBLY, ILLUSTRATED PARTS/RECOMMENDED PARTS 050217NC
ITEM # PART # DESCRIPTION
1 WC-75284 TANK, COMPLETE D1000GT/H DV W/ULTEM
FITTINGS
2 WC-37008 KIT, TANK LID ROUND (INCLUDES GASKET)
3 WC-43055 GUARD, SHOCK RESET THERMOSTAT (WC-522)
4 WC-5527K KIT, PROBE WATER LEVEL O-RING & NUT
5 WC-904-04 KIT,ELEMENT, HEATING 1.6KW120V W/ JAM NUT &
SILICONE O-RING
6 WC-1438-101 SENSOR, TEMPERATURE TANK
ITEM # PART # DESCRIPTION
2 WC-37008 KIT, TANK LID ROUND (INCLUDES GASKET)
3 WC-43055 GUARD, SHOCK RESET THERMOSTAT (WC-522)
4 WC-5527K KIT, PROBE WATER LEVEL O-RING & NUT
5 WC-934-04 KIT,ELEMENT HEATING 2.5KW 220V W/ JAM NUT &
SILICONE WASHERS
6 WC-1438-101 SENSOR, TEMPERATURE TANK
WC-75284 - Recommended Parts to Stock
ITEM # PART # DESCRIPTION
8 WC-522 THERMOSTAT, HI LIMIT HEATER CONTROL DPST
277V 40A
9 WC-37365 KIT, FITTING TANK INLET
10 WC-37266 KIT, FITTING TANK OVERFLOW
11 WC-37317 KIT, STRAIGHT FITTING & BUSHNG 8MM GEN USE
ITEM # PART # DESCRIPTION
7 WC-4382 GUARD, SHOCK HTNG ELMNT DOUBLE
8 WC-522 THERMOSTAT, HI LIMIT HEATER CONTROL DPST
277V 40A
9 WC-37365 KIT, FITTING TANK INLET
10 WC-37266 KIT, FITTING TANK OVERFLOW
11 WC-37317 KIT, STRAIGHT FITTING & BUSHNG 8MM GEN USE
WC-75284 - Tank Assembly
2
10
11
7
6
3
8
4
11
11
5
1
9
WC-75284 - Tank Assembly - Parts List

ELECTRICAL SCHEMATICS ES53
D1000-10, ELECTRICAL SCHEMATIC 050217NC
D1000GT12, D1000GH13