Cusack-Music STEREO PEDAL TAMER User manual

TECH SPECS
• Soft switch relay
• Latching operation with quick tap
Hold for momentary operation
• Standard 9v DC center negative power supply
• Current Draw ~5mA
• 5” x 3.85” x 1.9” (L x D x H)
POP STOP
If you are getting a pop when engaging/bypassing the
loop, you can move the internal jumpers to move the
“Pop Stop” circuit. (see image below)
• TB (top two posts) puts the Pop Stop on the loop
return, leaving the loop true bypass
• Putting the jumper on the bottom two posts puts the
Pop Stop in the audio path. It won’t be true bypass,
but may reduce pops.
• You can remove the jumper altogether to remove
Pop Stop.
Connect LOOP RETURN from output(s)
of guitar pedal.
Connect to the next
device in your chain with
the OUTPUT.
Tap the footswitch to
engage/bypass the
LOOP. Hold the switch
for momentary.
Connect an INPUT signal
here. You can connect a:
1) stereo signal using both
inputs
2) single mono path using
the BLUE input
3) split mono using the
RED input. Mono signal will
be sent to both both RED
and BLUE signal paths.
Power with a standard 9V
DC, center-negative power
supply. Current draw ~5mA
Connect LOOP SEND to
input(s) of guitar pedal.
Cusack Music
514 Lincoln Ave
Holland, MI 49423
CUSACKMUSIC.COM
Manufactured in
Holland, Michigan, USA
STEREO
PEDAL TAMER
C
C
U
S
A
C
K
-
M
U
S
I
C
H
O
L
L
A
N
D
,
M
I
,
U
S
A

C
C
U
S
A
C
K
-
M
U
S
I
C
H
O
L
L
A
N
D
,
M
I
,
U
S
A
FUNCTIONS
STEREO BYPASS LOOP
Stereo
Input
Stereo
Output
Stereo Effects
MONO BYPASS LOOP
InputOutput
Mono Effects
MUTE
Mono/
Stereo
Input
Mono/
Stereo
Output
Y-SPLIT STEREO LOOP
Mono
Input
Stereo
Output
Stereo Effects
MONO A/B OUTPUT SWITCH
Mono
Input
Output
A
Output B
STEREO A/B OUTPUT SWITCH
Stereo
Input
Output
A
Output B
MONO A/B INPUT SWITCH
Input
A
Mono
Output
Input B
STEREO A/B INPUT SWITCH
Input A
Stereo
Output
Input B
MONO A/Y OUTPUT SWITCH
Mono
Input
A out (red)
Y out (both)