CUSTOM SOLUTIONS Connect Chair User manual

Thank you for purchasing the Connect Chair from Custom Solutions! We greatly appreciate your support of
American manufacturing. To ensure long term comfort and reliability, please follow the assembly directions carefully.
Before we get started, please ensure you have the following tools:
Phillips Screwdriver & 5mm Allen Wrench (included in pack)
Note: 3mm Allen Wrench (included) is required for the optional headrest.
1. Remove all contents from box. **Interior boxes contain hardware, casters, arms and cylinder**
2. Insert casters into base, set aside.
3. Install arms onto seat using Phillips screws from ARM HARDWARE BAG. **ENSURE CORRECT ORIENTATION**
RightLeft

4. Install back to seat using (3) screws from BACK HARDWARE BAG and 5mm Allen Wrench.
6. Place seat assembly onto base (from step 1); the
cylinder will simply slide through the hole in the base.
5. Install cylinder and dust cover onto chair
by simply sliding them in place.
7. Install optional headrest using the 3mm Allen Wrench
and fasteners from the HEADREST HARDWARE PACK.
Assembled Chair with Headrest.