CyClone CYS1000R User manual

USE AND CARE GUIDE
MODELS
CYS1000R
OPERATION INSTRUCTIONS
Fan Operation
Fan Speeds: In this unit, a dedicated rocker switch controls the single fan with either HIGH or
LOW speed settings using the left switch located on the front of the machine.
Lights: A second rocker switch on the right dims the light on HIGH or LOW brightness
Firmly press your ngers against the light bulb and twist in a clockwise direction until
loosened.
Changing Lightbulbs
MAINTENANCE
FAN CONTROLS
HIGH
speed
LOW
speed
OFF
LIGHT
CONTROL
HIGH LOW
OFF
Your new fan features a unique, completely lter-less design. Oil and grease are separated
from the airow via non-stick coated fan blades. The grease is then pushed through rubber
tubing into convenient easily-removable grease cups for hassle-free, environmentally-friendly
cleaning. Simply remove the cups when grease builds up and clean them in the top rack of
your dishwasher.
Tip: Soak all parts in soapy water if there is heavy grease.
Grease Disposal
wARNING! Do not remove grease cups immediately after cooking or if grease is still hot.
wARNING! Ensure that light has fully cooled before changing bulbs.
Fan Blades: Fill a spray bottle with a mixture of dishwasher soap and water and spray into
the fan blades while the machine is running. The soapy water will run the same path through
the machine as the grease, effectively cleaning all of its internal components. The cleaning
solution will be dispensed in the grease traps for convenient, hassle-free disposal.
Exterior: The exterior of the machine can be maintained by wiping the surface area. Use a
stainless steel cleaner and a very gentle cloth for stainless steel machines. A gentle cleaning
agent, such as Windex, and a damp cloth can be used to wipe and buff machines with colored
nishes.
Fan Guard: To clean fan guard, unscrew two screws from the side of the fan guard, then soak
and hand-wash with dish soap.
Cleaning
wARNING! Ensure that all power leading to your range hood has been disconnected
before cleaning the fan guard.

REPLACEABLE PARTS
NAME QTY DESCRIPTION IMAGE
UM 09 1 Oil Saucer -
Round
UM12B 2
Rocker Switch
For Fan and
Light
FREQUENTLY ASKED QUESTIONS
NAME QTY DESCRIPTION IMAGE
UM 05 1 Fan Guard -
Shallow
UM 10 1
Grease
Collector -
Rectangular
UM 17 2 Halogen
Lightbulb
Cyclone Range Hoods Inc.
1361 Huntingwood Drive, Unit 16
Scarborough, ON M1S 3J1
Tel: [phone] or [phone] Fax [phone]
Email: [e-mail]
Website: www.CycloneRangeHoods.com
When do I need a Cyclone Range Hood?
Peoples’ cooking habits vary, but getting rid of airborne contaminants
.enoyreveroftnatropmisiaeragnikoocruoyniregnilhcihwsruododna
Whether it is steam from cooking soups steaming vegetables, grease
ventilation in their kitchen.
What is the difference between a round and rectangular opening?
The difference between the two shapes depends on the ductwork in
your home, and if applicable, the pre-cut hole in the cabinetry. Our
Cyclone Range Hood models with rectangular openings have an
additional optional opening in the back of the machine to vent directly
out the back, as required in some homes.
Can I install a range hood if my vent does not match the size or
shape of the range hood vent?
Our circular vents are 6 inches in diameter, and our rectangular vents
are 3 × 10 inches in size. In order to install a Cyclone Range Hood
with a different shaped vent, an adapter can be installed to adjust the
ducting to the correct shape. This is an additional part that needs to
be purchased and installed. Installing a range hood to a larger duct
is acceptable, although installing a range hood to a smaller duct work
will void the warranty.
Can I install a Cyclone Range Hood myself?
Installing a Cyclone Range Hood is fairly straightforward, and we
provide detailed installation instructions. We do not recommend
range hood installation for novices to electrical or handy work.
What is the minimum mounting height between the range top to
hood bottom?
The minimum mounting height between the range top to hood bottom
should be no less than 30”. The maximum mount height should be
no more than 36”. The hood must be installed at the correct mounting
height. Hoods mounted too low can result in heat damage, and hoods
mounted too high will have impaired performance.
How often do I clean my Cyclone Range Hood?
Cyclone recommends that our range hoods are cleaned at least once
every month. However, cooking habits differ and cleaning should