CYP SY-U3CC User manual

OPERATION MANUAL
SY-U3CC
HDMI to USB Video Capture Recorder

3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.00 12/02/2019 First release

5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................7
5. Features..................................................7
6. Operation Controls and Functions .......8
6.1 Front Panel................................................... 8
6.2 Rear Panel..................................................... 9
6.3 Configuration and Video Capture......10
7. Connection Diagram .......................... 13
8. Specifications...................................... 14
8.1 Technical Specifications ........................14
8.2 Video Specifications................................15
8.3 Audio Specifications...............................17
8.4 Cable Specifications ...............................17
9. Acronyms............................................. 18

6
1. INTRODUCTION
This HDMI to USB video capture recorder with HDMI bypass can support
resolutions up to 18Gbps (600MHz) 4K UHD with HDR (via the bypass
path) while simultaneously streaming the audio and video signal at
1080p to a USB connected PC for capture or re-broadcast. HDMI sources
up to 1080p60 are supported for capture without modication, while 4K
sources will be automatically scaled down to 1080p. The use of a special
video timing stabilization feature helps to ensure that the USB capture
stream won’t lock up or drop, even if the HDMI input source is intermittent
or becomes disconnected. Digital stereo audio from either HDMI (LPCM
2.0) or the 3.5mm analogue audio input will be captured with the HDMI
video source and is selectable within the conguration software.
USB capture is accomplished using the UAC (USB Audio Class) and UVC
(USB Video Class) standards, allowing the unit to support most common
video capture, chat, or streaming software, including support for the Free
OBS (Open Broadcaster Software) streaming software which is available
for Windows PC, macOS and Linux. The unit is powered directly by the
USB 3.0 port so an external power supply is not required (a Y-cable is
required when connected via USB 2.0 in order to deliver the necessary
power). Availability and access to the controllable features of the unit
depend on the capture software used.
2. APPLICATIONS
Live video stream recording for broadcast
Security camera recording
Gameplay video archival
3. PACKAGE CONTENTS
1×HDMI to USB Video Capture Recorder
1×USB 3.0 Cable (Type-B to Type-A)
1×Shockproof Feet (Set of 4)
1×Operation Manual

7
4. SYSTEM REQUIREMENTS
HDMI source equipment such as a media player, video game console
or set-top box.
HDMI receiving equipment such as an HDTV, monitor or audio
amplifier.
Personal computer (Windows or macOS) with a USB 3.0 port and
plenty of available hard drive space.
5. FEATURES
HDMI input and output with HDR, 3D & 4K@60Hz support, DVI 1.0
compatible
HDCP 2.2 and HDCP 1.x compliant
Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input
and output
Supports 'Deep Colour' input and output up to 12-bit
Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output
Automatically scales 4K sources to 1080p for USB capture
Unit may be powered directly via USB 3.0 (When using USB 2.0, a
Y-cable is required to provide additional power)
Supports video timing stabilization to help ensure a reliable and
stable USB capture stream
Capturing over USB 3.0 allows uncompressed video and audio data
capture (up to 1080p, LPCM 2.0)
Capturing over USB 2.0 requires the application of minimal MJPEG
compression to the video and audio data (up to 1080p, LPCM 2.0)
Supports capturing 2 channel digital audio from either HDMI (LPCM
2.0) or the 3.5mm analogue audio input (selectable via configuration
software)
Compliance with the UAC (USB Audio Class) and UVC (USB Video
Class) standards, allows the unit to support most common capture
and video streaming software
Note: Availability and access to the controllable features of the unit depend
on the capture software used.
Support for the Free OBS (Open Broadcaster Software) streaming
software which is available for Windows PC, macOS and Linux

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER HDCPACTIVE /
RECORD SY-U3CC
1 2 3
1POWER LED: This LED will illuminate RED to indicate the unit is on
and receiving power but does not yet have a live HDMI source. When
a live HDMI source is detected, the LED will illuminate GREEN.
2ACTIVE/RECORD LED: When software on the connected PC is actively
receiving video from the unit via USB, this LED will illuminate GREEN.
3HDCP LED: This LED indicates the HDCP state of the connected HDMI
source. If the source is using HDCP 1.x, the LED will illuminate RED.
If the source is using HDCP 2.2, the LED will illuminate BLUE. If the
source is not using HDCP, the LED will remain off.
Note: Recording video sources containing HDCP protection is not
supported by this unit. Only HDMI bypass will be active with HDCP
sources.

9
6.2 Rear Panel
USB 3.0 HDMI OUT HDMI IN AUDIO IN
1 2 3 4
1USB 3.0 PORT: Connect directly to a PC’s USB 3.0 port for control,
video capture and power.
Note: If connected via USB 2.0, use of a Y-cable connected to 2 USB 2.0
ports is required in order to properly power the unit.
2HDMI OUT PORT: Connect to an HDMI TV, monitor or amplifier for
digital video and audio output.
3HDMI IN PORT: Connect to HDMI source equipment such as a media
player, game console or set-top box.
4AUDIO IN PORT: Connect to the stereo analogue output of a device
such as an audio player or PC.

10
6.3 Configuration and Video Capture
6.3.1 Video Capture Configuration
The USB Video Capture Control software provides control over a selection
of basic functions of the unit, including: audio source, HDCP, video
settings and volume. An option to return the unit to its factory defaults is
also provided.
Note: Please obtain the “USB Video Capture Control” software from your
authorised dealer and save it in a directory where you can easily find it. Both
Windows and macOS versions are available.
To use the software, connect the unit to your PC via the provided USB 3.0
cable and then execute the control application. A configuration window,
similar to the screenshot below, will appear. All changes made to the
video capture signal via this app will take effect immediately.
1) Audio Source: Switch the audio source to record between the
embedded HDMI audio and the analogue line input.
Note: Only LPCM 2.0 audio can be recorded. Bitstream audio is not
supported.