CYP CLUX-11SA User manual

CLUX-11SA
CLUX-11SA HDMI to
HDMI repeater with
Audio decoder
Operation Manual

1. Introduction................................................................................
2. Features.......................................................................................
3. Package Contents.....................................................................
4. Operation Controls and Functions..........................................
4.1 Front Panel...........................................................................
4.2 Rear Panel............................................................................
5. Connection and Installation.....................................................
6. Specifications.............................................................................
TABLE OF CONTENTS
1
1
1
2
2
3
4
4

1
1. Introduction
This is the most advanced solution for HDMI to HDMI repeater with Audio
decoder. This is compatible with HDMI v1.3 specifications, a cutting edge
technology which defines to transfer Deep Color (12 bits/color) video with a
high bandwidth up to 225MHz. The HDMI v1.3 Distribution Amplifier also does
signal amplification and equalization output that can connected with other
HDMI to HDMI units for repeater function. The audio output supports
uncompressed analog LPCM 7.1 and new lossless compressed digital Bitstream
(Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) and it depend on
the input sources.
2. Features
 HDMI 1.3, HDCP 1.1 and DVI1.0 Compliant.
 Supports digital video formats in Deep Color Mode from 25MHz to 225MHz
for 36 bits (12 bits/color).
 Supports high definition input up to 1080p@(24/60)Hz, output resolution
follows input.
 Supports HDMI signal amplification and equalization output for repeater
function.
 Supports uncompressed digital LPCM 7.1, 5.1 or 2 channels and
compressed digital Bitstream (Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio) through HDMI input and output ports.
 Supports digital Dolby 5.1/2 and LPCM 2 channels output through optical
audio output port.
 Supports LPCM 7.1/5.1/2 channels output through multi-channel output
ports.
 Integrated HDCP encryption for transmitting protected audio and video
content.
 Supports CEC bypass.
 The HDMI cable distance test with 1080p/8bits resolution, the Input/Output
source can run up to 20/15 meters and test with 1080p/12bits the
Input/Output source can run up to 15/10 meters.
3. Package Contents
 HDMI over HDMI with Audio decoder.
 5V DC power supply adaptor.
 Operation Manual.

4. Operation Controls and Functions
4.1 Front Panel
1 HDMI input: Connect the HDMI input port to the HDMI output port of
your source equipment such as DVD player or set-top-box.
2 Audio selection switch: To switch between
Bitstream/LPCM7.1/5.1/LPCM2 channels.
Note: When switch to other audio mode, the display will disappear for
few seconds. This is normal phenomenon for the system.
3 Power: Plug the 5VDC power supply into the unit and connect the
adaptor to AC wall outlet.
2
LPCM
5.1/7.1CH
2CH
BITSTREAM
CLUX-11SA HDMI LPCM 7.1 DECODER
DC 5V
HDMI INPUT
POWER
1 32

3
4.2 Rear Panel
1 HDMI output: Connect the HDMI output port to the HDMI input port of
your display.
2 Multi channel output: Connect the audio channel output to the input of
your amplifier equipment and follow the amplifier connections.
FL: Front Left
FR: Front Right
LFE: Low Frequency Effect
FC: Front Center
RL: Rear Left
RR: Rear Right
RLC: Rear Left Center
RRC: Rear Right Center
3 Optical output: Connect Optical output to the display audio input or
audio equipments for Dolby5.1/2 and LPCM2 channels.
1
OPTICAL OUTMULTI CHANNEL OUTHDMI OUT
FL/FR LFE/FC RL/RR RLC/RRC
2 3

4
Input port
HDMI input audio format
Output port
HDMI output audio format
Multi channel output ports
Multi channel output
audio format
Optical output port
Optical output audio
format
Power Supply
Dimensions (mm)
Weight(g)
Chassis Material
Silkscreen Color
Operating Temperature
1 x HDMI
LPCM 7.1, 5.1 or 2 channels and Bitstream (Dolby
TrueHD, Dolby Digital Plus and DTS-HD Master Audio)
1 x HDMI
LPCM 7.1, 5.1 or 2 channels and Bitstream (Dolby
TrueHD, Dolby Digital Plus and DTS-HD Master Audio)
4 x 3.5Φphone jack
LPCM 7.1/5.1/2 channels
1 x Optical
Dolby 5.1/2 and LPCM 2 channels
5V/2.6A DC (US/EU standards, CE/FCC/UL certified)
100(W) x 147(D) x 25(H)
300
Aluminum
Black
0°C ~ 40°C
6. Specifications
5. Connection and Installation
HDMI TV
Amplifier
DVD

20071217 MPM-CLUX11SA
Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.