Cypress CX-5100AH User manual

CX-5100AH
HDMI with Audio Amplier
Operation Manual
CX-5100AH

Revision History
Revision Date Summary of Change
V1 20080926 Preliminary Release
Precaution
Failure to follow theprecautions described below may causedamageto
Digital HDMI AV Receiver and void thewarranty.
 DO NOT open thecase. Doing so will void thewarranty. If you nd
problem with it, pleasereturn back to yourretailer orseller who will
assist you orprovideyou with solution.
 DO NOT usethird-Party AC adapter orpower cord. Doing so may
damageDigital HDMI AV Receiver.
 DO NOT bump, jarordrop contents of theproducts as it may
damageit and result in warranty void.
 DO NOT set any liquids orbeverages on thecaseas they may
damageDigital HDMI AV Receiver.

Table of Contents
1
1
1
2
2
3
4
5
6
6
7
8
8
9
11
1. Introduction…………………………………………................................
2. Application.............................……………………………………………
3. Contents.............................……………………………………………….
4. System Require............................………………………………………..
5. Features.............................………………………………………………..
6. Installation............................……………………………………………..
7. Front View.............................……………………………………………..
8. Remote Control...........................………………………………………..
9. LCM Operation.............................……………………………………….
9.1 LCM Menu 1....................................................................................
9.2 LCM Menu 2....................................................................................
9.3 LCM Operation Table....................................................................
10. Audio Input & Output Diagrm.............................................................
11. Audio Output Format Table................................................................
12. Specication........................................................................................

1. Introduction
Thank you forpurchasing Digital HDMI AV Receiver with Audio Amplier.
When HDMI products ll out themarket speedily, many follow devices are
still yet catching up. How to enjoy a full HDMI solution with limited cost and
spaceis themost urgent request now in themarket. How to display a total
solution HDMI AV on yourHDMI TV that is with limited HDMI sound solution is
thekey to enjoy yourtrueHDMI AV.
Digital HDMI AV Receiver is themost advanced solution forHDMI Audio
Amplier. Digital HDMI AV Receiver supports not only 3 (three) HDMI input
and 2 (two) HDMI output but also, Analog / Digital audio input/output.
Digital HDMI AV Receiver allows you to enjoy theater standard sounds with
less cost and space. Digital HDMI AV Receiver designs friendly useremote
control with entry level set up foryourenjoyment of free spaceentertainment
environment. Digital HDMI AV Receiver makes yourHDMI AV world ever the
best.
Pleasefollow this manual to begin enjoying thebenet of yourtrueHDMI AV.
Wesuggest keeping it in a safeplaceforfuture reference.
2. Application
 Home theater entertainment.
 Bridge between your audio devices and video devices.
 Enlarge sounds from stereo in TV to surround 5.1CH HDMI AV.
 Transforms analog sounds into digital sounds.
 Combination usage of Digital (Optical / Coaxial) & HDMI input Digital
(Optical / Coaxial) & HDMI output ports.
3. Contents
 Digital HDMI AV Receiver
 Power Adaptor
 Power Cord
 RemoteControl RC36 (battery included)
 User Manual
1

4. System Requirements
Front LR/RearLR/Center/Subwoofer speakers, Amplier, Optical / Coaxial
cables, DVD player, HDMI/LCD TV and other audio equipment(s).
5. Features
 Compliant with HDMI 1.2, HDCP 1.1 and DVI 1.0 specications.
 Full HD 1080p supported.
 Supports a widerangeof PC and HDTV resolutions from VGA to UXGA
and 480p to 1080p. Maximum resolution bandwidth is 165MHz.
 Built-in HDMI EDID simulatorand HDCP keyset allows each output to work
independently in connecting to a HDMI display.
 7 Digital (Optical / Coaxial) input port and 4 Digital (Optical / Coaxial)
output port.
 Lip Sync delay (up to 480ms can besplit up to 3 channels).
 8Ωspeaker will producesounds up to 9Wx6 / 54W.
 Easy to install and simpleto operate.
 Elegant design with thermal dispensation.
2

L/Lt
1 5.1CH AMP out: Connect theFront LR /RearLR /Center/Subwoofer to the
Amplier.
2 Optical 1~2 in: Connect theOptical input ports 1~2 to theOptical output
port of yoursourceequipments.
3 Coaxial 1~2 in: Connect theCoaxial input ports 1~2 to theCoaxial output
port of yoursourceequipments.
4 Optical out: Connect theOptical output port to theinput port of youraudio
equipment.
5 Coaxial out: Connect theCoaxial output port to theinput port of youraudio
equipment.
6 HDMI 1~3 in: Connect theHDMI 1 ~ 3 input ports to theHDMI output port of
yoursourceequipments.
7 Analog audio in: There are fourL/R input connectors; it can connect to four
different stereo audio sources.
8 HDMI out: Connect theHDMI 1 ~ 2 output ports to theHDMI input port of
yourdisplay orAmplier.
9 5.1 CH out: Connect theFront LR/RearLR/Center/Subwoofer to Multi CH
input.
10 Power: Plug the18VDC power supply into theunit and connect theadaptor
to AC wall outlet.
Note:
a. A bitstream format sounds including AC-3 &DTS and others will not be
displayablehence, optical, coaxial &6 RCA will output no sounds and the
LCM will show NONPCM. Digital HDMI AV Receiver is not supporting bit
steam sounds.
b. Coaxial / Optical / HDMI Audio SampleRate: 48KHZ
6. Installation
Follow thestep-by-step instruction below to install yourDigital HDMI AV
Receiver
Get familiarwith thehousing and connections of yournew Digital HDMI AV
Receiver.
1 2 1 2 L
R
SUBREARFRONT4321
OPTICAL COAXIAL OPTICALCOAXIAL
12123
HDMI INPUT HDMI OUT
DIGITAL
IN
DIGITAL
OUT
FRONT
R/Rt L R
CENTER
5.1CH AMP
OUTPUT
REAR
ANALOG INPUT 5.1CH OUTPUT
SUBWOOFER
CENTER(TOTAL)
1 2 3 4 5
6
7 10 9
8
3

7. Front View
PowerHome
Menu
Video In

Audio In

-
+
VOLUME
1 2 3 4 5 6 7 8
1 Power indicator: When power on, theLED will indicatein Green color.
When power off, theLED will indicatein Red color.
2 Power switch: Turn thesystem ON/OFF.
3 IR sensor.
4 Homemenu: Press thebutton to enter theLCM menu selection. Forthe
LCM menu selections pleaserefer to “section 9 LCM Operation”.
5 Video in: Press [Video in ▲] switch between different input video sources
(HDMI 1, HDMI 2, HDMI 3).
6 Audio in: Press [Audio in ▼] switch between different input audio sources
(Optical 1, Optical 2, Coaxial 1, Coaxial 2, L/R 1, L/R 2, L/R 3, L/R 4,
HDMI_2ch orHDMI_Mch). By choosing HDMI_2ch &HDMI_Mch theoutput
sourcewill depend on HDMI input 1~3 singleinput’s original signal only.
Pleaserefer to “section 10 LCM Operation”.
7 Volume-/+: Press [-] / [+] to adjust thevolumeup/down.
8 LCM display.
4

8. Remote Control
1. Power: Press to turn ON/OFF the system. When
power on the LED will indicate in Green color,
when power off the LED will indicate in Red
color.
2. Mute: Press to mute the audio, press again to
turn ON the audio.
3. HDMI in: Select the desire HDMI input source
from 1~3.
4. Audio in: Select the desire audio input source
(OPT1, OPT2, COAX1, COAX2).
5. Analog audio in: Select the desire stereo
analog input source from 1~4.
6. HDMI LPCM: <MULTI CH> for 5.1 CH output.
<2CH> for 2CH L/R output.
7. -/+: Press [-] / [+] to adjust the volume,
Press [-]: to decrease the volume, minimum
level to +0
Press [+]: to increase the volume, maximum
level to +64
8. Menu/▲/▼/←/→:
Press to enter the LCM menu and sub-menu.
From sub-menu press [▲/▼/←/→] to adjust
Bass /Treble /Loudness /LipSync LR, C and
default setting.
1
2
4
5
7
3
MUTEMUTE
CR-36
112233
OPT1OPT1 OPT2OPT2 COAX1COAX1 COAX2COAX2
1122
HDMI LPCMHDMI LPCM
2CH2CHMULT I CHMULT I CH
VOLUMEVOLUME
3344
ANALOG AUDIO INANALOG AUDIO IN
DIGITAL AUDIO INDIGITAL AUDIO IN
HDMI INHDMI IN
MENU
POWERPOWER
6
8
5

9. LCM Operation
Start Menu Display V:HDMI_1
A:Opt_1 L:16
↓
1. Video input selection
HDMI 1 input HDMI 2 input HDMI 3 input
↓
↓
V:HDMI_1 A:Opt_1 L:+16
↓
↓
V:HDMI_2 A:Opt_1 L:+16
V:HDMI_3 A:Opt_1 L:+16
2. Audio input selection
Optical 1 input
↓
↓
Optical 2 input
↓
↓
V:HDMI_1 A:Opt_2 L:+16
Coaxial 1 input
↓
↓
V:HDMI_1 A:Opt_1 L:+16
V:HDMI_1 A:Coax_1 L:+16
Coaxial 2 input
↓
↓
V:HDMI_1 A:Coax_2 L:+16
L/R 1 input
↓
↓
V:HDMI_1 A:LR_1 L:+16
L/R 2 input
↓
↓
V:HDMI_1 A:LR_2 L:+16
L/R 3 input
↓
↓
V:HDMI_1 A:LR_3 L:+16
L/R 4 input
↓
↓
V:HDMI_1 A:Opt_1 L:+16
HDMI input
V:HDMI_1 A:HDMI L:+16
3. Volume Adjustment
↓
V:HDMI_1 A:Opt_1 L:+00
V:HDMI_1 A:Opt_1 L:+64
↓
Default +16
4. Bass Adjustment
↓
Bass -12 >Press MENU Exit
Bass +12 >Press MENU Exit
↓
Default +00
5. Treble Adjustment
↓
Treble -12 >Press MENU Exit
Treble +12 >Press MENU Exit
↓
Default +00
6. Loudness Adjustment
↓
Loudness +00 >Press MENU Exit
Loudness +16 >Press MENU Exit
↓
Default +00
7. LipSync LR
↓
LipSync LR +00 >Press MENU Exit
LipSync LR +16 >Press MENU Exit
↓
Default +00
8. LipSync Center
↓
LipSync C +00 >Press MENU Exit
LipSync C +16 >Press MENU Exit
↓
Default +00
Main menu
( Manual )
Wait...
↓ ↓
( Manual )
↓
Load Default Wait…
9. Factory setting
Factory Setting - OFF Factory Setting - ON
↓
Default Off >Press MENU Exit
Default On >Press MENU Exit
↓
Default +00
Operation instruction: ↓↑ ：Press ↓↑to move the cursor. ←→ ：Press ←→to move the cursor or adjust the value. MENU：Switch between Main Manual or Sub-Manual or Confirm the selection.
9.1 LCM Menu
6

0 1 2 3 4 5 6 7 8 9 A B C D E F
Main MenuVideo In V : H D M I έ1
A : O p t _ 1 L : Ѐ1 6
Audio In V : H D M I έ1
A : O p t έ1 L : Ѐ1 6
Volume V : H D M I έ1
A : O p t έ1 L : Ѐ1 6
0 1 2 3 4 5 6 7 8 9 A B C D E F 0 1 2 3 4 5 6 7 8 9 A B C D E F
Sub Menu Bass B a s s Ё1 2 B a s s Ѐ1 2
υP r e s s M E N U E x i t υPr e s s M E N U E x i t
Treble T r e b l e Ё1 2 T r e b l e Ѐ1 2
υP r e s s M E N U E x i t υP r e s s M E N U E x i t
Loudness L o u d n e s s Ѐ0 0 L o u d n e s s Ѐ1 6
υP r e s s M E N U E x i t υP r e s s M E N U E x i t
LipSync LR L i p S y n c L R Ѐ0 0 L i p S y n c L R Ѐ1 6
υP r e s s M E N U E x i t υP r e s s M E N U E x i t
LipSync C L i p S y n c C Ѐ0 0 L i p S y n c C Ѐ1 6
υP r e s s M E N U E x i t υP r e s s M E N U E x i t
Default D e f a u l t O f f D e f a u l t O n
υP r e s s M E N U E x i t υP r e s s M E N U E x i t
Wait L o a d D e f a u l t
W a i t . . .
9.2 LCM Menu 1
7

Function Level Suggestion level
Bass -6 ~ +6 0
Treble-6 ~ +6 0
Loudness -6 ~ +6 0
LipSync LR 0 ~ 16 0
LipSync C 0 ~ 16 0
Default Off/On off
LipSync can delay120ms +/- 5% foreach mono channel.

10. Audio input & output diagram
9.3 LCM Operation table
8

11. Audio output format table
Output Jacker &Format
HDMI_1
Out
HDMI_2
Out OPT Out COAX Out 6 RCA LineOut
Input Jacker &Format
PCM
5.1 CH
HDMI_1
In
PCM 5.1
CH
PCM 5.1
CH
PCM 2 CH
(Downmix)
PCM 2 CH
(Downmix)
Real 5.1
CH
HDMI_2
In
PCM 5.1
CH
PCM 5.1
CH
PCM 2 CH
(Downmix)
PCM 2 CH
(Downmix)
Real 5.1
CH
HDMI_3
In
PCM 5.1
CH
PCM 5.1
CH
PCM 2 CH
(Downmix)
PCM 2 CH
(Downmix)
Real 5.1
CH
PCM 2
CH
HDMI_1
In PCM 2 CH PCM 2 CH PCM 2 CH PCM 2 CH Virtual 5.1 CH
HDMI_2
In PCM 2 CH PCM 2 CH PCM 2 CH PCM 2 CH Virtual 5.1 CH
HDMI_3
In PCM 2 CH PCM 2 CH PCM 2 CH PCM 2 CH Virtual 5.1 CH
9

Input Jacker &Format
PCM
2 CH
OPT_1 In
PCM 2 CH
/ 5.1 CH
(Audio
from HDMI
In)
PCM 2 CH
/ 5.1 CH PCM 2 CH PCM 2 CH Virtual 5.1 CH
OPT_2 In
PCM 2 CH
/ 5.1 CH
(Audio
from HDMI
In)
PCM 2 CH
/ 5.1 CH PCM 2 CH PCM 2 CH Virtual 5.1 CH
COAX_1
In
PCM 2 CH
/ 5.1 CH
(Audio
from HDMI
In)
PCM 2 CH
/ 5.1 CH PCM 2 CH PCM 2 CH Virtual 5.1 CH
COAX_2
PCM 2 CH
/ 5.1 CH
(Audio
from HDMI
In)
PCM 2 CH
/ 5.1 CH PCM 2 CH PCM 2 CH Virtual 5.1 CH
Line
2 CH
RCA
Line_1 In
PCM 2 CH
/ 5.1 CH
(Audio
from HDMI
In)
PCM 2 CH
/ 5.1 CH PCM 2 CH PCM 2 CH Virtual 5.1 CH
RCA
Line_2 In
PCM 2 CH
/ 5.1 CH
(Audio
from HDMI
In)
PCM 2 CH
/ 5.1 CH PCM 2 CH PCM 2 CH Virtual 5.1 CH
RCA
Line_3 In
PCM 2 CH
/ 5.1 CH
(Audio
from HDMI
In)
PCM 2 CH
/ 5.1 CH PCM 2 CH PCM 2 CH Virtual 5.1 CH
RCA
Line_4 In
PCM 2 CH
/ 5.1 CH
(Audio
from HDMI
In)
PCM 2 CH
/ 5.1 CH PCM 2 CH PCM 2 CH Virtual 5.1 CH
Note: 1. 6 ports of RCA output only support 5.1 Channels.
2. This system can’t support compress audio input (AC3 orDTS), if the
audio sources are contain compress audio theoutput from Optical,
Coaxial, 6 RCA and 5.1 CH amplier are soundless, this is normal phe-
nomena.
10

Video Input Ports 3 xHDMI
Digital Audio Input Ports 2 xCoaxial, 2 xOptical
Analog Audio Input Ports 4 xAudio R/L
Video Output Ports 2 xHDMI
HDMI Format V1.2
Support Resolution 480i/1080i, 1080p 50/60, 1080p 24, VGA/UXGA
HDMI Audio Format PCM2, PCM5.1, Dolby 5.1 (PS3 Setting)
HDMI Cablein/out 15/15M
Digital Audio Output ports 1 xCoaxial, 1 xOptical
Analog Audio Output ports 5.1 channels output clips
(8ohm trumpets, theoutput power is around
15Wx6/90W )
Coaxial Audio Format PCM2
Coaxial Audio Sampling 32, 44.1 and 48KHz
SPIDIF Audio Format PCM2
SPIDIF Audio Sampling 32, 44.1 and 48KHz
Amplier Output Format 5.1CH AMP output: PCM2, PCM5.1
5.1CH output: PCM2, PCM5.1
IR DistanceHorizontally free space7M , 30 degree left/right free
space3M
Power Supply 18V/3.33A DC (US/EU standards, CE/FCC/ULcertied)
Dimensions (mm) 171(W) x356(D) x70(H)
Weight(g) 1764
Chassis Material Aluminum
Silk Skin ColorSilver
Operating Temperature Operating from 0°C ~ 40°C
Power Consumption 60W (Max)
11. Specications
11

12

20080902 MPM-CX5100AH
Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.