Cyrus iR14 User manual


Cyrus iR14 Remote control User Instrucons
CONTENTS
IMPORTANT! Read before operang this equipment! ............ 1
Product service centres ....................................................... 1
REMOTE CONTROL OPERATION ............................................ 2
Remote control introducon .......................................... 2
Remote control backlight................................................ 2
Fing baeries to the remote control ........................... 2
Sending commands to Cyrus components...................... 2
Switching on Cyrus components..................................... 2
Cyrus amplier commands .................................................. 3
Cyrus CD player commands ................................................. 4
Cyrus Audio streamer commands........................................ 5
Cyrus Phono Signature commands...................................... 6
Learning TV and Satellite commands................................... 7
Preparaon for learning.................................................. 7
Learning commands........................................................ 7
Checking programmed commands...................................... 8
Problems with learning........................................................ 8
Sending TV or SAT commands ............................................. 8
SPECIfICATIONS...................................................................... 9
Power Supply .................................................................. 9
Enclosure ........................................................................ 9
WEEE........................................................................................ 9

Cyrus iR14 Remote control User Instrucons
1
IMPORTANT! Read before operang this
equipment!
HEED WARNINGS: All warnings on the product and in the
operang instrucons should be adhered to.
READ ALL THE INSTRUCTIONS: All the safety and operang
instrucons should be read before the product is operated.
RETAIN INSTRUCTIONS: The safety and operang
instrucons should be retained for future reference.
FOLLOW INSTRUCTIONS: All operang and use instrucons
should be followed.
CLEANING: Do not use liquid or aerosol cleaners. Clean only
with a dry cloth.
WATER AND MOISTURE: Do not use this product near water
- for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement; or near a swimming pool
and the like. The product must not be exposed to dripping
or splashing and no objects lled with liquids, such as vases,
shall be placed on the product.
HEAT: The product should be situated away from heat
sources such as radiators, stoves, or any other products
(including ampliers) that produce heat.
BATTERIES: Warning : Baeries shall not be exposed to
excessive heat such as sunshine, re or the like.
Product service centres
For product service or technical advice, contact only
authorised Cyrus service centres. Contact details for Cyrus
distributors may be found on the Cyrus website at www.
cyrusaudio.com.

Cyrus iR14 Remote control User Instrucons
2
REMOTE CONTROL OPERATION
Remote control introducon
The iR14 remote control will send commands to Cyrus
ampliers, CD players, Audio streamers* and the Phono
Signature.
The remote control can also be programmed with the
commands from two other remote control handsets. These
will normally be for your TV and a Satellite or terrestrial TV
set-top box, programmed to the TV and SAT buons, but
could also be other audio components such as a Cyrus tuner
or DVD player etc.
*NOTE: It may be necessary to upgrade the rmware in
an Audio streamer to enable Infra-red remote control
operaon.
Remote control backlight
The remote control keypad includes a back-light. The back-
light will switch on automacally when moved or when a
command is sent.
Fing baeries to the remote control
The baery compartment is on the back of the remote
control.
123
45
79
6
8
0/10
SATTV
STORE
MENU
ENTER
SELECT
LIST
CH
SETUP
abc def
ghi jkl mno
pqrs tuv wxyz
GUIDE
INFO
TEXT
TV/AV
CONTROL
SOURCE
Switching on Cyrus components
Press one of the keys in the SOURCE group.
123
45
79
6
8
0/10
SATTV
STORE
MENU
ENTER
SELECT
LIST
CH
SETUP
abc def
ghi jkl mno
pqrs tuv wxyz
GUIDE
INFO
TEXT
TV/AV
CONTROL
SOURCE
NOTE: If inputs have been named CD (ampliers and DAC
XP Signature) and/or Stream X (ampliers only), the correct
input will also be selected.
123
45
79
6
8
0/10
SATTV
STORE
MENU
ENTER
SELECT
LIST
CH
SETUP
abc def
ghi jkl mno
pqrs tuv wxyz
GUIDE
INFO
TEXT
TV/AV
CONTROL
SOURCE
Sending commands to Cyrus components
AAA
AAA
a
b
Press the catch on the 1.
baery cover and li o
the cover.
Slide a AAA baery under 2.
the retaining hook in the
upper half of the baery
compartment as shown.
Fit a second AAA baery 3.
into the remaining space.
Replace the baery 4.
cover.
Replace the handset baeries only with AAA baeries of the
same voltage and type.
Discard used baeries in accordance with recycling
regulaons in force in your area.
Press the CYRUS •
key to set the
remote control to
Cyrus mode.
123
45
79
6
8
0/10
SATTV
STORE
MENU
ENTER
SELECT
LIST
CH
SETUP
abc def
ghi jkl mno
pqrs tuv wxyz
GUIDE
INFO
TEXT
TV/AV
CONTROL
SOURCE
Press • or to
switch on and
send commands
to a Cyrus
amplier.
Press the •
key to switch
on a Cyrus CD
player and send
commands to a
Cyrus CD player
and amplier.
Press the • key
to switch on
a Cyrus Audio
streamer and
send commands
to a Cyrus Audio
streamer and
amplier.

Cyrus iR14 Remote control User Instrucons
3
Cyrus amplier commands
Press the CYRUS key to set the remote control to Cyrus •
mode.
You can now control a Cyrus amplier. The CYRUS key
will ash red when commands are being sent in Amplier
mode.
The Amplier mode commands available are listed below –
Set Cyrus ampliers, CD players and Audio streamers to 1.
Standby.
Set the handset to send commands to Cyrus 2.
components.
Send commands to a Satellite receiver (or other device 3.
programmed to use this key).
Set the handset to send commands to an amplier and 4.
CD player.
Step to the next amplier input.5.
No command for an amplier.6.
No command for an amplier.7.
No command for an amplier.8.
No command for an amplier.9.
No command for an amplier.10.
No command for an amplier.11.
No command for an amplier.12.
Amplier mute.13.
No command for an amplier.14.
No command for an amplier.15.
No command for an amplier.16.
No command for an amplier.17.
No command for an amplier.18.
No command for an amplier.19.
No command for an amplier.20.
No command for an amplier.21.
Setup key for programming TV/SAT keys.22.
No command for an amplier.23.
No command for an amplier.24.
No command for an amplier.25.
No command for an amplier.26.
No command for an amplier.27.
Volume down.28.
Volume up.29.
Balance.30.
No command for an amplier.31.
No command for an amplier.32.
No command for an amplier.33.
No command for an amplier.34.
Display o.35.
No command for an amplier.36.
Step to the previous input.37.
Set the handset to send commands to an amplier and 38.
Audio streamer.
Send commands to a TV (or other device programmed 39.
to use this key).
123
45
79
6
8
0/10
SATTV
STORE
MENU
ENTER
SELECT
LIST
CH
SETUP
abc def
ghi jkl mno
pqrs tuv wxyz
GUIDE
INFO
TEXT
TV/AV
CONTROL
SOURCE
a
b
c
d
e
f
g
h
i
1)
1!
1@
1#
1$
1%
1^
1&
1*
1(
2)
2!
2@
2#
2$
2%
2&
2^
2*
2(
3)
3!
3@
3#
3$
3%
3^
3&
3*
3(

Cyrus iR14 Remote control User Instrucons
4
Cyrus CD player commands
Press the CYRUS key•
Press the • key to set the remote control to CD
mode.
The key will light red. You can now control both a Cyrus
CD player and amplier. The key will ash red when
commands are being sent in CD mode.
The CD mode commands available are listed below –
Set Cyrus ampliers, CD players and Audio streamers to 1.
Standby.
Set the handset to send commands to an amplier.2.
Send commands to a Satellite receiver (or other device 3.
programmed to use this key).
Set the handset to send commands to an amplier and 4.
CD player.
Step to the next amplier input.5.
No command for a CD player.6.
CD player repeat.7.
No command for a CD player.8.
CD player next track.9.
CD player search forwards.10.
CD player previous track.11.
No command for a CD player.12.
Amplier mute.13.
No command for a CD player.14.
No command for a CD player.15.
CD player audio phase. Changes in phase are subtle and 16.
are best established from the listening posion. When
the phase seng is changed, the display text area will
show the message ‘Phase Normal’ or ‘Phase Invert’. The
performance of the CD player is unaected whether the
signal is in normal or phase inverted mode.
CD player stop.17.
CD player search forwards.18.
No command for a CD player.19.
CD player next track.20.
CD player numeric keypad. Enter a one or two digit track 21.
number to jump to a specic track.
Setup key for programming TV/SAT keys.22.
CD player memory store.23.
CD player previous track.24.
CD player pause.25.
CD player search back.26.
CD player play/pause.27.
Amplier volume down.28.
Amplier volume up.29.
Amplier balance.30.
No command for a CD player.31.
CD player search back.32.
No command for an CD player.33.
No command for a CD player.34.
CD player display o.35.
CD player display mode. Choose track elapsed me or 36.
disc remaining me.
Step to the previous amplier input.37.
123
45
79
6
8
0/10
SATTV
STORE
MENU
ENTER
SELECT
LIST
CH
SETUP
abc def
ghi jkl mno
pqrs tuv wxyz
GUIDE
INFO
TEXT
TV/AV
CONTROL
SOURCE
a
b
c
d
e
f
g
h
i
1)
1!
1@
1#
1$
1%
1^
1&
1*
1(
2)
2!
2@
2#
2$
2%
2&
2^
2*
2(
3)
3!
3@
3#
3$
3%
3^
3&
3*
3(
Set the handset to send commands to an amplier and 38.
Audio streamer.
Send commands to a TV (or other device programmed 39.
to use this key).

Cyrus iR14 Remote control User Instrucons
5
Cyrus Audio streamer commands
Press the CYRUS key•
Press the • key to set the remote control to Audio
streamer mode.
The key will light red. You can now control both a Cyrus Audio
streamer and amplier or an Audio streamer that includes
an amplier. The key will ash red when commands are
being sent in Audio streamer mode.
The Audio streamer mode commands available are listed
below –
Set Cyrus ampliers, CD players and Audio streamers to 1.
Standby.
Set the handset to send commands to a Cyrus amplier.2.
Send commands to a Satellite receiver (or other device 3.
programmed to use this key).
Select an input named CD and set the handset to send 4.
commands to an amplier and CD player.
Step to the next amplier input.5.
No command for an audio streamer.6.
Audio streamer repeat.7.
Audio streamer display informaon.8.
Audio streamer cursor up.9.
Audio streamer cursor right.10.
Audio streamer cursor down.11.
No command for an audio streamer.12.
Amplier mute.13.
No command for an audio streamer.14.
No command for an audio streamer.15.
No command for an audio streamer.16.
Audio streamer stop.17.
No command for an audio streamer.18.
No command for an Audio streamer.19.
Audio streamer next track.20.
Audio streamer alpha-numeric keypad.21.
Setup key for programming TV/SAT keys.22.
No command for an Audio streamer.23.
Audio streamer previous track.24.
Audio streamer pause.25.
No command for an audio streamer.26.
Audio streamer play/pause.27.
Amplier volume down.28.
Amplier volume up.29.
Amplier balance.30.
Audio streamer back.31.
Audio streamer cursor le.32.
Audio streamer select.33.
Audio streamer home.34.
Audio streamer display o.35.
No command for an Audio streamer.36.
Step to the previous amplier input.37.
Set the handset to send commands to an amplier and 38.
Audio streamer.
Send commands to a TV (or other device programmed 39.
to use this key).
123
45
79
6
8
0/10
SATTV
STORE
MENU
ENTER
SELECT
LIST
CH
SETUP
abc def
ghi jkl mno
pqrs tuv wxyz
GUIDE
INFO
TEXT
TV/AV
CONTROL
SOURCE
a
b
c
d
e
f
g
h
i
1)
1!
1@
1#
1$
1%
1^
1&
1*
1(
2)
2!
2@
2#
2$
2%
2&
2^
2*
2(
3)
3!
3@
3#
3$
3%
3^
3&
3*
3(

Cyrus iR14 Remote control User Instrucons
6
Cyrus Phono Signature commands
Commands are sent to the Phono Signature via keys reserved
from the amplier control system.
The remote control operates in the same way as the front
panel controls - press a key to select a funcon, change
that seng with the CURSOR keys, conrm the seng with
ENTER/SELECT.
This page lists commands that will control the Phono
Signature.
Press the CYRUS key to set the remote control to Cyrus •
mode.
You can now control both a Cyrus amplier and the Phono
Signature. The CYRUS key will ash red when commands are
being sent in this mode.
123
45
79
6
8
0/10
SATTV
STORE
MENU
ENTER
SELECT
LIST
CH
SETUP
abc def
ghi jkl mno
pqrs tuv wxyz
GUIDE
INFO
TEXT
TV/AV
CONTROL
SOURCE
Standby
Select
Step le Step right
Input select
Warp lter
MM/MC
Gain select
Resistance
Capacitance
Store
Display o

Cyrus iR14 Remote control User Instrucons
7
Learning TV and Satellite commands
In addion to controlling Cyrus components, the remote
control can learn the commands from two other remote
control handsets. These will normally be a TV and a Satellite
or terrestrial TV set-top box, programmed to the TV and
SAT buons, but could also be other audio components
including a Cyrus tuner or DVD player etc.
All keys may be programmed with the excepon of the
groups marked CONTROL and SOURCE and the SETUP key.
Preparaon for learning
Check the following points before aempng to learn any
commands -
Check that both remote controls have fresh baeries.•
Choose a locaon on a tabletop that is not brightly lit. •
Subdued light is beer, away from bright natural or
indoor lighng.
Check that you have enough me to spare to complete •
the learning process for all the keys you want to use.
Learning commands
In this example, the Cyrus remote control will be learning
commands from a ‘reference’ Satellite receiver remote
control.
Set the two remote controls up facing each other, spaced 1.
by about 5cm.
123
45
79
6
8
0/10
SATTV
STORE
MENU
ENTER
SELECT
LIST
CH
SETUP
abc def
ghi jkl mno
pqrs tuv wxyz
GUIDE
INFO
TEXT
TV/AV
CONTROL
SOURCE
123
45
79
6
8
0/10
SATTV
STORE
MENU
ENTER
SELECT
LIST
CH
SETUP
abc def
ghi jkl mno
pqrs tuv wxyz
GUIDE
INFO
TEXT
TV/AV
CONTROL
SOURCE
The keypad will light and the key you selected will be red.
Press the TV or 2.
SAT key to select
the mode that you
want to program.
Press and hold the 3.
SETUP key.
The mode key will change to white. Aer about three
seconds, the mode key will light red again. This indicates
that the remote control is ready to learn codes.
Release the SETUP key.4.
The remote control is now waing to learn commands. The
keypad will light connually and the mode key will light pale
red.
On the reference remote control, press and hold the rst 5.
key you want to learn (for example, volume up) unl the
mode key ashes red.
This indicates that the command has been received.
Release the key on the reference remote control.6.
Press a key on the Cyrus remote control (volume up 7.
in this example) to select where you want to save that
command.
The mode key will stop ashing. This indicates that the
command has been saved successfully.
If the learning process was successful, the remote control
will be ready to learn the next command.
Repeat steps 5 to 7 for each command you want to 8.
learn.
When you have completed learning all commands -
Press the SETUP key.•
The mode key will change to white. Aer a few seconds the
backlight will switch o.
1 2 3
45
7 9
6
8
0/10
SATTV
STORE
MENU
ENTER
SELECT
LIST
CH
SETUP
abc def
ghi jkl mno
pqrs tuv wxyz
GUIDE
INFO
TEXT
TV/AV
CONTROL
SOURCE
123
65
4
789
0
AUDIO SUB
TTX GUIDE FAV
INFO TV/R
OK
LIST EXIT
AD
ZOOM
MENU
VOL CH
5cm

Cyrus iR14 Remote control User Instrucons
8
Checking programmed commands
Select the mode that you just programmed and check •
that the commands were learned successfully.
NOTE: The TV or SAT mode key should ash red when
sending a command. If the mode key is not ashing, then
the command has not learned correctly.
Make a note of any commands that have not programmed •
correctly and repeat the learning process to add these
in.
NOTE: When you start the learning process it does not erase
any programmed keys so you can re-program individual keys
if required.
Problems with learning
If none of the commands have learned correctly, try re-
starng the learning process again. Test a few keys rst
to ensure that your handset is compable for learning. If
the test works then connue to program the rest of the
commands you need.
If you sll have problems, check carefully that the mode
light is ashing correctly as you send a command to learn.
If not, it may be that the baeries need replacement in the
reference handset or that the spacing between the handsets
is not ideal. Try adjusng the spacing between the handsets
and repeang the learning process.
If you connue to have problems, it may be that your
handset is incompable with the learning process. This
could happen with an older design of handset or one that
has an unusual code-set.
Sending TV or SAT commands
Once you have programmed all the keys with the commands
you want, you can use the remote control to send commands
to your TV or Satellite receiver etc.
Press the TV or SAT key to select the mode you want.•
Press the command key.•
The mode key will ash red when sending a programmed
command.

Cyrus iR14 Remote control User Instrucons
9
WEEE
This logo means that this product is not to
be disposed of with your household waste.
This product should be handed over to a
designated collecon point to be recycled.
Your cooperaon in the correct disposal of this
product will contribute to the eecve usage
of natural resources. For more informaon
on collecon points, contact your disposal
service or City Hall.
SPECIFICATIONS
Power Supply
Voltage: ...................................... 3 V (2 x AAA baeries)
Enclosure
Dimensions (WxHxD)................................235 x 50 x 25 mm
Weight ...................................................................... 0.17 kg
iR14 English v0.7

Cyrus Audio Ltd., Ermine Business Park, Hunngdon, PE29 6XY, U.K.
Table of contents
Other Cyrus Remote Control manuals