Cytron Technologies Walking Brachiosaurus User manual

DIY STEM Walking Brachiosaurus
Brought to you by:

Packing List:
•Wooden parts for the dinosaur structure
•1 x Small DC Motor
•Screwdriver
•Some screws
•Battery holder and remote control
•AA batteries (Included)

Step 1:
Connect the wires from the
remote control to the DC
motor as shown.

Step 2:
Join the wooden structures
together as shown in the
image.

Step 3:
Place the DC motor on top of
the wooden platform.

Step 4:
Attach the head and the tail
of the dinosaur to the
wooden platform as shown.

Step 5:
Attach the wooden pieces as
shown in the image using
screws. Secure the structure
with two circular wooden
piece as highlighted.

Step 6:
Place two circular wood
through the DC motor shaft
as shown in the highlighted
box. Attach all four small
wood on the platform.
Repeat the assembly on the
other side of the body.

Step 7:
Screw the wooden leg pieces
as shown in the image.
Secure the feet of the
dinosaur with screws.

Step 8:
Attach a single circular piece
to the motor shaft and
attach it with two screws as
shown.