Czur StarryHub Instruction manual

Thank you for choosing StarryHub, the all-in-one business
conferencing system.
Since this is a new product style in video conferencing
industry, we recommend you to go over this instruction
before activating the StarryHub. So you can understand
how StarryHub works and enjoy the video meeting
experience.
StarryHub Quick User Guide

FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20cm between the radiator &
your body.
The symbol indicates DC voltage.
RECYCLING: This product bears the selective sorting symbol for
Waste electrical and electronic equipment ( WEEE ). This means that this
product must be handled pursuant to European directive 2012/19/EU in
order to be recycled or dismantled to minimize its impact on the
environment.

1. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20cm between the radiator &
your body.
The symbol indicates DC voltage.
RECYCLING: This product bears the selective sorting symbol for
Waste electrical and electronic equipment ( WEEE ). This means that this
product must be handled pursuant to European directive 2012/19/EU in
order to be recycled or dismantled to minimize its impact on the
environment.
StarryHub Main Unit
Rear
Front
1
Projector Lens Auto-focus Camera
USB3.0
USB3.0 USB2.0 DC IN
LAN HDMI
HDMI
USB2.0 DC IN
LAN
Camera LED IndicatorCamera

Upper Side
Right
Elevation Bracket, 4°/8° Two-level Adjustment
Power Power LED Indicator
Charging Dock Mic. Array

Power On/Off
2
· Power on
Connect the power source, the power indicator will turn
red.
Then press the power button (for 1 second) until the
indicator blinks in blue color.
When the power indicator turns blue (not blinking) and
the screen lights up, StarryHub is ready for use.
* How to activate StarryHub
After installing the StarryHub unit, power on, you can
follow the steps shown on the projection screen to either
register a new StarryHub account or log-in with an
existing account.
This 6-digit StarryHub account number is also used as the
ID of the meetings it launches.
You can also invite this account number to join video
meetings launched by other StarryHub accounts.

· Standby
When powered on, press the power button or put the
TouchBoard back to the charging dock to enter Standby
Mode.
Note: If initial setting of the StarryHub is not finished yet,
StarryHub will not enter Standby mode by pressing power
button or putting back TouchBoard to the charging dock.
· Wake up
In Standby Mode, press the power button or pick up the
TouchBoard from the charging position to wake up
StarryHub.
If the TouchBoard is not in charging position when in
Standby Mode, move or pick up the TouchBoard will also
wake up the StarryHub.
* It’s recommended to keep StarryHub in Standby Mode in
order to receive video meeting invitations.
Only shut down and remove power source if you are not
going to use StarryHub in a long time.
· Power off
When StarryHub is powered on, long-press the power
button for 3 seconds. There will be a pop-up window on
the screen so you can either shut down or reboot with
TouchBoard or WriteBoard (StarryHub accessories).
Or you can long-press the power button for 10 seconds to
shut down directly.

TouchBoard
Front
Back
ON
Charging pinTouchBoard Power on/off
Buzzer
Touch/Board V- V+ Signal Source
Back
LED Indicator
Touch Panel / Key Board
Auto-focus

How to Use the TouchBoard
3
TouchBoard acts as a wireless controller to the StarryHub.
You can operate StarryHub with the TouchBoard easily.
Before using the TouchBoard, please turn the power button
(on the back of the TouchBoard) to ON status.
Put the TouchBoard back to charging dock (on the top of
StarryHub) after each use.
·Pair the TouchBoard with the StarryHub
* TouchBoard and the StarryHub are paired by factory default.
ON
ON
Main unit power on TouchBoard power on
Paired!
❶
❷
❸
Power on StarryHub and the TouchBoard.
Put the TouchBoard back to the charging dock, wait for
10 seconds until the icons on the first row of the
TouchBoard light up. Pairing is completed.
Long press the Touch/Board for 5 seconds until
the indicator on the upper right corner blinks in blue
color.

Tap on Touch/Board to switch input
method (touch panel or keyboard).
· Touch/Board
Tap on to focus the projector lens
automatically. Long press to use
manual focus.
If Auto-focus function is set (from
StarryHub Settings page), when
moving StarryHub, auto-focus will
start immediately until StarryHub
stops moving.
· Auto-focus
Tap on V- V+ to adjust
volume of the StarryHub.
· Volume adjustment
· Switch signal source
Tap on to switch projection
screen source: StarryHub, HDMI
or Wireless Screen Casting.
· Back
Tap to get back to previous
page or previous operation.

In Touch mode , you can use finger touch to
operate StarryHub e.g. slide, tap, slide with 2 fingers,
zoom in/out with 2 fingers.
Tap with one finger then slide: drag target.
Tap with 3 fingers: to pop up more operation options.
In Board mode , keyboard will light up so you can
use the TouchBoard as an input method.
· Finger touch
* Check the label on the back side of the TouchBoard to
see more finger touch operations.
· Keyboard
Click
Slide Slide with 2 fingers Zoom with 2 fingers
Double-click with one finger then slide Click with 3 fingers
2

· CZUR Cloud & Cloud File
· CZUR APP
· Scan QR code to download CZUR APP
More Features and Operations
4
StarryHub is designed for office room, with features for local
meeting/presentation, online video meeting, meeting
recording, big screen projection and so much more.
We also offer CZUR Cloud service, supplementary
applications and additional gadgets to make sure you can
enjoy the video meeting experience from different type of
terminals.
You would need to register a CZUR account in order to use
CZUR Cloud or these applications.
Use your CZUR account to log in www.czur.cc on a
computer.
You can upload or manage Cloud files and sync to
StarryHub.
Install CZUR APP from APP store on your mobile phone,
add StarryMeeting Module in the APP.
After log in, you can join video meetings launched by
StarryHub from CZUR APP on your phone.
The LED indicator on the upper right will turn red when the
battery of the TouchBoard is low. Please put the
TouchBoard back to the charging dock (the 3 pins on the
top of StarryHub) to recharge.
· Low battery status

1.All warranty terms and after-sales service are following
the local laws and regulations in the territories of the
CZUR authorized sellers.
If there’s no specified laws or regulations in this territory,
standard warranty is 12-month from the date of purchase
for all hardware, excluding nature expiration, artificial
damage, unusual breaks and terms listed below in
non-warranty coverage.
2.Non-warranty coverage:
1)Standard working environment temperature should be
within the range of 0~40 degrees Celsius,
2)Failure or damage caused by incorrect installation or
use in non-specified working conditions (excessive
temperature, excessive humidity, etc.),
3)Damage caused by non-official parts or parts replaced
by users without instruction or confirmation from CZUR
support team,
4)Damage caused by disasters, accidents or human
factors,
·Keep the StarryHub and its accessories out of the reach of
children.
·Please make sure to use the StarryHub in a dry and
ventilated environment.
·Do not store the StarryHub and its accessories under
extreme temperature because extreme temperature will
shorten the life of electronic parts.
·Do not put the StarryHub or its accessories into any drying
machines or heating devices.
After-sale Service And Warranty
6
Thank you for choosing StarryHub and supporting CZUR.
Please go over below so you can understand how
after-sales service works and what the warranty terms are.

· CZUR all rights reserved.
5)Failure or damage caused by unauthorized disassem-
bly, repair, modification, or abuse,
6)Damage caused by repairs performed by any none CZUR
authorized parties.
Contact Information
7
Reach CZUR team via one of the following ways for
support or share your comments.
Company Name: CZUR Tech Co., Limited
Website: www.czur.com
Sales Office: RM722, Block B, Podium of Building No. 12,
Shenzhen Bay Eco-Technology Park, No. 10 Gaoxin South
RD., Nanshan District, Shenzhen, 518063, China.
Office line: 0086-755-23974826
E-mail address: [email protected]
Software Center: Room1001,10th Floor, Block A, No.32A
Huoju Road, High-tech Industrial Zone, Dalian City,
Liaoning Province, China
Factory Address: 6th Floor, Building E, Huihong Industrial
Park,No. 170 Jinxiaotanghuancun Road, Fenggang Town,
Dongguang city, Guangdong province, 523690, China.
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and
other countries.