D-Link DFE-550TX Mounting instructions

Check Your Package Contents
These are the items included with your purchase:
If any of the below items are missing, please contact your reseller.
Introduction
This Quick Installation Guide gives step-by-step instructions for setting up the D-Link DFE
530TX (Dual speed 10/100Mbps Ethernet PCI Adapter) and DFE-550TX (Dual speed
10/100Mbps Ethernet PCI Adapter). For more detailed information about the adapter, making
network connections, and technical specifications, please refer to the User’s Guide hardcopy
or file included with your adapter.
DFE-530TX
Fast Ethernet 10/100
Adapter
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders.
Software and specifications subject to change without notice.
DFE-530TX Network Interface Card (NIC) or
WOL Cable
DFE-550TX Network Interface Card (NIC)
Driver Diskette or CD-ROM
DFE-550TX
Fast Ethernet 10/100
Adapter

2
Hardware Installation
1-1 Shut down the computer & unplug the power cord.
1-2 Remove the chassis cover.
1-3 Plug the Boot ROM into the appropriate socket if your order
includes Boot ROM, if not, go ahead to 1-4.
1-4 Insert the card into an empty PCI slot.
1-5 Install the bracket screw to secure the card to the computer
chassis.
1-6 Connect the WOL cable if your system supports WOL.
(See more details in Step 2)
1-7 Replace the computer chassis cover.
1-8 Reconnect the power cord and switch the computer power on.
Connecting the WOL cable
2.1 Connect the end of the WOL cable connector to the NIC WOL
connector.
2.2 Refer to the motherboard manual to find the WOL socket
location and connect the cable.
2.3 Power on the PC and press Delete or F1 when prompted to
CMOS setup. Enable the WOL function.

3
Connecting Network Cable
3.1 Connecting for 10Mbps Ethernet:
Cat. 3, Cat. 4, and Cat. 5 UTP cables, as well as EIA/TIA-568
100Ω STP cable, all meet Ethernet cabling requirements.
3.2 Connecting for 100Mbps Fast Ethernet:
Cat. 5 UTP cable is required for Fast Ethernet.
Connecting Network Cable
The instructions for software installation are given as a README
file on the shipping diskette/CD-ROM. See the README.TXT on
the diskette/CD-ROM to find the proper program for your operating
system.

4
Technical Support
You can find software updates and user documentation on the D-Link websites.
D-Link provides free technical support for customers within Canada,
the United Kingdom, and Ireland.
Customers can contact D-Link technical support through our websites,
or by phone.
For Customers within
The United Kingdom & Ireland:
D-Link UK & Ireland Technical Support over the Telephone:
08456 12 0003 (United Kingdom)
[phone] (Ireland)
Monday to Friday 8:00 am to 10:00 pm GMT
Sat & Sun 10.00 am to 7.00 pm GMT
D-Link UK & Ireland Technical Support over the Internet:
http://www.dlink.co.uk
ftp://ftp.dlink.co.uk
For Customers within Canada:
D-Link Canada Technical Support over the Telephone:
1-800-361-5265 (Canada)
Monday to Friday 7:30 am to 12:00 am EST
D-Link Canada Technical Support over the Internet:
http://support.dlink.ca
email: [email protected]