2
PRODUCT SETUP / УСТАНОВКА ПРОДУКТА
DRiVER SETUP /
INSTALLING THE DRIVERS
Insert the driver CD, which is included in the
package, into the CD-ROM of your computer.
Open CD-ROM folder and choose the driver
of your D-Link adapter*.
When prompted “Installation Complete”, click
OK. If prompted to restart, click “Yes”.
УСТАНОВКА ДРАЙВЕРОВ
D-Link.*
Do not insert the Adapters into the computer’s slot before installing the drivers.
!
HARDWARE iNSTALLATiON /
PREPARING YOUR COMPUTER
Turn off your computer and disconnect the
power cord. Remove the back cover of
your computer. (Refer to your computer’s
ПОДГОТОВКА КОМПЬЮТЕРА
ИСПОЛЬЗОВАНИЕ ДОСТУПНОГО PCI-
СЛОТА
ЗАКРЕПЛЕНИЕ PCI-АДАПТЕРА
ПОСЛЕДНИЕ ШАГИ
USING AN AVAILABE PCI SLOT
slot. PCI slots are usually white or cream
coloured. Remove the back plate (the small
piece of metal that covers the opening
for the card on the back cover that you
SECURING THE PCI ADAPTER
Secure the D-Link Adapter with the
screw on the back plate. Replace your
computer’s cover.
touching a metal part of your computer to discharge any static electricity before working with the
D-Link Ethernet Adapter.
!
FINAL STEPS
Reconnect the power cord and power
on the computer. Windows should
automatically detect and install the
adapter. If prompted to restart, click “Yes”.
OFF
ON
