D-Link DU-520 User manual

1
5-Port Hi-Speed
USB 2.0 PCI Adapter
DU-520DU-520
DU-520DU-520
DU-520
This product can be used with the
following operating systems:
Windows XP, Me, 2000, 98SEWindows XP, Me, 2000, 98SE
Windows XP, Me, 2000, 98SEWindows XP, Me, 2000, 98SE
Windows XP, Me, 2000, 98SE
Macintosh OS v10.1Macintosh OS v10.1
Macintosh OS v10.1Macintosh OS v10.1
Macintosh OS v10.1
CheckYourPackageContents
These are the items included with your purchase:
If any of the below items are missing, please contact your reseller.
Before You Begin
You must have at least the following:
•Windows XP/Me/2000/98SE or Macintosh OS v10.1
•Pentium Class CPU or Higher
•One Available PCI Slot
•CD-ROM Drive
• DU-520 Hi-Speed USB 2.0 PCI Adapter
• CD-ROM (containing Drivers,
Installation Guide and Warranty)
Run the Driver CD before you install the DU-520.
The Driver CD contains an installation program that
significantly simplifies the installation process.
Windows Users

2
Click Install Drivers
If the Autorun screen does not automatically start, click on Start > Run, enter
“D:\Autorun.exe” and click OK. “D” represents the letter of your CD-ROM drive.
Replace it if your CD-ROM drive is a different letter.
Only Windows XP users will
see this screen.
Click Continue Anyway
Insert the D-Link CD-ROM
Into Your Computer
Mac users please proceed to
the last section.
Turn on your computer and
insert the D-Link DU-520 Driver
CD in the CD-ROM drive.
Select No and
Shut Down
your computer.

3
Installing The DU-520 Hi-Speed USB
2.0 PCI Adapter Into Your Computer
Remove the outer coverof your computer.
Refer to your computer manual as needed.
Remove the backplate. (The small piece
of metal that covers the opening for the
PCI card).
Make sure that your computer is turned OFF
before installing the DU-520.
Locate an available PCI slot and
insert the DU-520 carefully into the
PCI slot.
Secure the DU-520 with the screw from
the backplate. Replace your computer's
cover and plug in the power cord.
Turn On yourcomputer.
PCI Slot

4
Windows XP Users
CompletingTheDriverInstallation
It is recommended to have the latest Windows XP Service Packs installed on your
computer for optimal product performance. Driver installation will proceed
automatically for Windows XP with Service Pack. If Service Packs are not
installed, follow these steps to complete the driver installation. You will see each
of these screens twice.
Click Continue Anyway
Click Next
Click Finish

5
Windows XP Users
Windows 2000 & Me Users
Click Continue Anyway
Click Next
Click Finish
The DU-520 driver installation will proceed automatically for Windows
2000 & Me users while Windows is starting.

6
Windows 98SE Users
Follow these steps to complete installation under Windows 98SE for each device
that Windows propmpts you to install. You will see each of these screens
twice.
Click Next
Click Next
Click Next
Make sure all
boxes are
unchecked
and Click
Next.

7
Windows 98SE Users
Click Next
Click Next
Click Finish
When prompted, Restart Your
Computer to complete the installation.
Windows 98 may prompt
you for the Windows 98
Setup disk. If prompted,
insert the Windows 98
Setup disk and select OK.

8
Macintosh OS X 10.1 Users
Double-click DU-520 when it
appears on the desktop
Double-click
USB2EHCI_V1033 when
it appears on the desktop
Insert the DU-520 Driver CD
into the CD-ROM drive.
Drag-&-drop
USB2EHCI_V1033_1130.img
to the desktop
Double-click
USB2EHCI-
V1033_1130.IMG
from the
desktop
Double-click
USB2EHCI_V1033.pkg

9
Macintosh OS X 10.1 Users
Enter your Name
& Password
Click the Lock
Click Continue
Click OK

10
Macintosh OS X 10.1 Users
Click Continue
Select a
Destination
Volume
Click Install
Click Continue
Installation