D-Link mydlink DSP-W110 User manual

DSP-W110
Quick Install Guide
mydlink™
Wi-Fi Smart Plug

Package Contents
Minimum Requirements
General Requirements:
• Wireless router (802.11ac/802.11n) with Internet Service
• An available power outlet
Mobile Requirements:
• Mobile device or tablet with iOS 6.0 or above, Android 4.0 or above
If any of the above items are missing, please contact your reseller.
DSP-W110 mydlinkTM Wi-Fi Smart Plug
Quick Install Guide
Quick Install Card
2

Before you Begin
Plan the location of your Smart Plug devices:
1. Connect Smart Plug devices into electrical outlets that are not
controlled by a wall switch. This will help you to avoid accidentally
turning o power to the device.
2. Verify that your Smart Plug devices are electrically rated to operate with
the power available in your location.
3. Be sure to plug the power cables into properly grounded electrical
outlets in order to help prevent against electrical shock.
Safety
1. Do not open the device or attempt to repair or service it.
2. Use the device in a dry location, and avoid placing it in a humid environment.
3. Do not submerge the device in liquid or attempt to clean it with liquids or
solvents. To clean the device, disconnect from the power outlet and use a
damp towel.
4. This device should only be used indoors.
3

Hardware Overview
Status LED
Outlet
Reset Button
Front View
WPS Button
ON/OFF Button
& Power LED
WPS Blinking Green
Press for one second to start the WPS
connection process. The Status LED will start
to blink green.
Reset Solid Red
Press and hold until the Status LED turns red
in order to reset the device back to the factory
default settings (for about 10 seconds).
ON/OFF Button Press to turn the device connected to the DSP-W110 ON or OFF.
Status LED
Solid Green The Smart Plug is successfully connected to
your network.
Blinking Green The WPS process is in progress.
Blinking Orange The Smart Plug is not properly connected to
your wireless network.
Solid Red The Smart Plug is powering on, attempting to
reset, or the device is defective.
O If the Smart Plug will not power on, try
plugging the Smart Plug into another outlet.
Power LED
Solid Green The electronic device you plugged into your
Smart Plug is powered on.
O The device you plugged into your Smart Plug
is turned o or not receiving power.
Outlet Connect your appliances, lamps, and other electronic devices you
wish to control.
4

Installation
Download the free mydlinkTM Home app from the App Store (iOS) or Google
Play (Android).
1
First install the mydlinkTM Home app on your mobile device.Then simply tap
on the icon to launch the app.
2
4Once the conguration process is complete, use the mydlinkTM Home
app to control your home’s electronic devices from anywhere.
3Log into your mydlinkTM account. If you don’t have one, sign up for a free
mydlinkTM account by tapping the Sign Up! link.
If there are no other mydlinkTM
devices in your account, tap Add a
new device.
If there are existing mydlinkTM
devices in your account, tap the gear
icon in the upper-left hand corner
and then tap Add new devices.
Then follow the on-screen instructions. The wizard will guide you through
the conguration process for your DSP-W110.
OR
5

FAQs
1. How do I reset the DSP-W110?
When you reset your DSP-W110, it will change your
settings back to the factory default settings. To reset
the device, locate the Reset button on the side of the
device. With the device plugged in, press and hold the
Reset button until the status LED turns red (for about
10 seconds).
Reset
2. Why isn’t the Power LED turning on when I plug in my Smart Plug?
If the Power LED is not turning on:
a. Press the ON/OFF button on the front of the Smart Plug.
b. Make sure the outlet is working properly. Try plugging in another
device to see if it works.
c. Make sure that if the outlet is controlled by a light switch, it is in
the ON position.
d. Try a dierent outlet to see if the Smart Plug works there.
3. Why can’t I connect to my wireless router?
If you are having trouble connecting to your wireless router, try plugging
the DSP-W110 into a location that is closer to your router. After the Status
LED turns solid green, you can unplug the Smart Plug and move it to the
desired location.
4. Where can I nd the mydlinkTM Home app?
You may download the free mydlinkTM Home app from the App store (iOS) or
Google Play Store (Android). Search for the mydlinkTM Home app by typing
in“mydlink Home”.
5. How do I set up a schedule for my smart plug?
Open the mydlink Home app, tap on the smart plug you want to set a
schedule for. Tap“Schedule”and then tap on the circle on the schedule you
want activated, then tap the back button to save and activate the schedule.
6

GPL Code Statement
This D-Link product includes software code developed by third parties, including
software code subject to the GNU General Public License (“GPL”) or GNU Lesser
General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL,
and information on obtaining access to the GPL code and LGPL code used in this
product, are available to you at:
http://tsd.dlink.com.tw/GPL.asp
The GPL code and LGPL code used in this product is distributed WITHOUT ANY
WARRANTY and is subject to the copyrights of one or more authors. For details,
see the GPL code and the LGPL code for this product and the terms of the GPL and
LGPL.
Written Oer for GPL and LGPL Source Code
Where such specic license terms entitle you to the source code of such software,
D-Link will provide upon written request via email and/or traditional paper mail the
applicable GPL and LGPLsource code les via CD-ROM for a nominal cost to cover
shipping and media charges as allowed under the GPL and LGPL.
Please direct all inquiries to:
Email:
GPL[email protected]
Snail Mail:
Attn: GPLSOURCE REQUEST
D-Link Systems, Inc.
17595 Mt. Herrmann Street
FountainValley, CA 92708
GNU GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
View the full GPL Code Statement at http://www.gnu.org/licenses/gpl.html
7

Technical Support
This guide is only for the rst time conguration. Refer to the user manual to learn
more. We also oer FAQs, videos, live chat, email support, and telephone support on
our website.
Version 1.00(NA)_90x130
Aug 20, 2014
PMQSPW110EX104
Canada
http://support.dlink.ca/DSP-W110
© 2014 D-Link. All Rights Reserved. D-Link and the D-Link logo are trademarks or registered trademarks of
D-Link Corporation or its subsidiaries. All other third-party marks mentioned herein may be trademarks of their
respective owners. This publication may not be reproduced, in whole or in part, without prior express written
permission from D-Link Systems, Inc.

DSP-W110
Guide d’installation
rapide
mydlinkMC
Prise intelligente Wi-Fi Smart Plug

Contenu de la boîte
Exigences minimales
Exigences générales:
• Routeur sans l (802.11ac/802.11n) avec service Internet
• Une prise de courant disponible
Exigences relatives aux appareils mobiles:
• Appareil mobile ou tablette avec iOS 6.0 ou une version supérieure,
Android 4.0 ou une version supérieure
Contactez votre revendeur s'il manque l'un des éléments ci-dessus.
Prise intelligente mydlinkMC Wi-Fi Smart Plug DSP-W110
Guide d’installation rapide
Carte d’installation rapide
2