D-Link Powerline HD DHP-300 User manual

2D-Link DHP-300 Quick Install Guide
• Windows®XP SP2 or 2000 SP4
• 233MHz processor and at least 64MB of RAM
• An available Ethernet Adapter (100MBit/s)
CAT5 Ethernet Cable
Package Contents
DHP-300
Powerline HD Ethernet Adapter
System Requirements
If any of the above items are missing, please contact your reseller.
CD-ROM with Manual and
Installation Wizard

3 D-Link DHP-300 Quick Install Guide
Hardware Overview
Hardware Overview
Power LED
A solid light indicates that the
device is receiving power.
Powerline LED
A solid light indicates that the device
has detected another Powerline
device on the network.
Ethernet LED
A solid light indicates a connection
on the Ethernet port. The LED blinks
during data transmission.

Hardware Overview
D-Link DHP-300 Quick Install Guide 4
Ethernet
Connect CAT5 Ethernet cable to the DHP-300
Ethernet port.

5 D-Link DHP-300 Quick Install Guide
Hardware Installation
Hardware Installation
Connect the Ethernet Cable
Connect the included Ethernet cable to the network cable connector
located on the DHP-300 and attach the other end of the Ethernet cable
to the network or PC.
Note: Network Connectivity is confirmed when the green Powerline
LED indicator on the DHP-300 is illuminated.
Power
Plug the DHP-300 into an AC wall outlet or power strip.
Note: Power source is confirmed when the green LED Power Indicator
on the DHP-300 is illuminated.

Software Installation
D-Link DHP-300 Quick Install Guide 6
Software Installation
Click on Install Utility
Follow the simple steps below to run the Setup Wizard to guide you
quickly through the installation process.
Insert the D-Link DHP-300 Powerline HD Ethernet Adapter CD into
your CD-ROM drive. If the CD Autorun function does not automatically
start on your computer, click Windows® Start > Run.
In the Run command box type “D:\DHP300.exe”, where D: represents
the drive letter of your CD-ROM. If it does start, proceed to the next
screen.

7 D-Link DHP-300 Quick Install Guide
Software Installation
Click Next
The InstallShield Wizard will
begin the DHP-300 software
Setup will install to the default
location: C:\Program Files\D-Link
DHP-300\DHP-300 PLC Utility,
where C: represents the drive
letter of your hard drive. To install
to a different location click Browse
and specify the location.
Click Next
Click Next

Software Installation
D-Link DHP-300 Quick Install Guide 8
The WinPcap 3.1 installation
is necessary to run the D-Link
DHP-300 Utility, click Next to
continue with the installation.
Click Next
Click I Agree

9 D-Link DHP-300 Quick Install Guide
Software Installation
The WinPcap 3.1 Installation is
complete. Click Finish to close
the wizard.
The installation wizard is now
complete click Finish.
Click Finish
Click Finish

Configuration
D-Link DHP-300 Quick Install Guide 10
Configuration
After you have completed the D-Link DHP-300 Utility installation
wizard, double-click the D-Link DHP-300 PLC Utility icon on your
desktop to start the conguration of the DHP-300.
The utility provides you with the
option of setting your own unique
Network ID and the ability to
prioritize trafc passing through
the network.
Double-click the D-Link
DHP-300 PLC Utility
Click Next