D-Link RANGEBOOSTER G WUA-2340 User manual

2D-Link WUA-2340 Quick Install Guide
A computer or laptop with an available USB 2.0 port
Windows®2000 or XP
300MHz processor and at least 64MB of RAM
Properly installed and working USB Controller
An 802.11g or 802.11b access point (for Infrastructure
mode), or another 802.11g or 802.11b wireless adapter (for
Ad-Hoc networking mode.)
Package Contents
System Requirements
If any of the above items are missing, please contact your reseller.
D-Link WUA-2340
Wireless USB 2.0 Adapter
Cradle
Manual, software, and
warranty on CD

3 D-Link WUA-2340 Quick Install Guide
Hardware Overview
USB Port
Used to connect the WUA-2340 to your
computer.

4D-Link WUA-2340 Quick Install Guide
The WUA-2340 lets you access your stored data and media files using a wireless
connection from virtually anywhere within the operating range of your wireless
network. Keep in mind, however, that the number, thickness and location of walls,
ceilings, or other objects that the wireless signals must pass through, may limit the
range. Typical ranges vary depending on the types of materials and background RF
(radio frequency) noise in your home or business. The key to maximizing wireless
range is to follow these basic guidelines:
4
Keep the number of walls and ceilings between the WUA-2340 and other network
devices to a minimum - each wall or ceiling can reduce your WUA-2340’s range
from 3-90 feet (1-30 meters.) Position your devices so that the number of walls
or ceilings is minimized.
1
Be aware of the direct line between network devices. A wall that is 1.5 feet thick
(.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At
a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that
the signal will travel straight through a wall or ceiling (instead of at an angle) for
better reception.
2
3
Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices
or appliances that generate RF noise.
Building Materials make a difference. A solid metal door or aluminum studs may
have a negative effect on range. Try to position access points, wireless routers, and
computers so that the signal passes through drywall or open doorways. Materials
and objects such as glass, steel, metal, walls with insulation, water (fish tanks),
mirrors, file cabinets, brick, and concrete will degrade your wireless signal.
If you are using 2.4GHz cordless phones or X-10 (wireless products such as
ceiling fans, lights, and home security systems), your wireless connection may
degrade dramatically or drop completely. Make sure your 2.4GHz phone base is
as far away from your wireless devices as possible. The base transmits a signal
even if the phone in not in use.
5
Wireless Installation Considerations

5 D-Link WUA-2340 Quick Install Guide
Turn on the computer and Insert the D-Link WUA-2340 Driver CD in the CD-ROM drive.
The step-by-step instructions that follow are shown in Windows®XP. The steps and
screens are similar for the other Windows®operating systems.
Note: Do NOT install the WUA-2340 Wireless G USB Adapter into
your computer before installing the driver software from the D-
Link CD!
Click Install Drivers.
If the CD Autorun function does not automatically start on your computer, type “D:\
Drivers\setup.exe”. If it does start, proceed to the next screen.
Software Installation

6D-Link WUA-2340 Quick Install Guide
The InstallShield Wizard window will
appear.
Click Next to continue.
By default setup will install to the
default location: C:\Program Files\
Rangebooster G WUA-2340, where
C: represents the drive letter of your
hard drive. To install to a different
location click Browse and specify the
location. Click Next.
Select the Program Files folder
location. Click Next to continue.

7 D-Link WUA-2340 Quick Install Guide
The D-Link configuration wizard will
now appear.
If you are using Windows®XP (SP2),
you will have the option to use either
the D-Link utility or the built-in
Windows®Wireless utility.
Click Next to continue.
Insert the adapter into an available
USB port on your computer.
Optional: If desired or necessary,
attach the cradle between the WUA-
2340 and your computer.
If the Found New Hardware Wizard
appears, click Cancel.
Click Next to continue.
Enter the network name (SSID). If
you enter the SSID incorrectly, you
will automatically be brought to the
site survey page.
Click Next to continue or click Scan
to display the site survey page.

8D-Link WUA-2340 Quick Install Guide
Click the Scan button to display a list
of wireless networks (site survey).
Click on the network name (SSID)
and click Connect.
If the wireless network you are trying
to connect to is encrypted, enter the
WEP key or WPA-PSK passphrase.
Click Next to continue.
Click Finish to continue. If you are
prompted to reboot your computer,
select Yes, I want to restart my
computer now.

9 D-Link WUA-2340 Quick Install Guide
Hold the USB adapter with both hands.
Apply little force to slowly pull out the cover
from both sides.
Insert the WUA-2340 into an available USB port
on your computer.
Optional: If desired or necessary, attach the
cradle between the WUA-2340 and your
computer.
USB Installation

10D-Link WUA-2340 Quick Install Guide
Connect to a Wireless Network
The WUA-2340 uses the Configuration Utility as the management software.
The utility provides the user an easy interface to change any settings related
to the wireless adapter. After you have completed the installation of the WUA-
2340 and whenever you start the computer, the Configuration Utility starts
automatically and the system tray icon is loaded in the toolbar. Clicking on
the utility icon will start the Configuration Utility.
If you are using Windows®XP, please skip to page 11.
This window will allow you to see available wireless networks in your area.
Simply click the network (SSID) you want to connect to and click the Connect
button. If you are connecting to a secure network, you will be prompted to
enter the encryption key. Please refer to the Wireless Security section in the
manual located on the D-Link CD.

11 D-Link WUA-2340 Quick Install Guide
Windows®XP users may use the built-in wireless utility. The following instructions
are for Service Pack 2 users.
If you receive the Wireless Networks
Detected bubble, click on the center of
the bubble to access the utility.
You may also right-click on the wireless
computer icon in your system tray (lower-
right corner next to the time). Select View
Available Wireless Networks.
The utility will display any available wireless networks in your area. Click on a network
and click the Connect button.
Refer to the manual for information on connecting to a secure network.
Windows®XP Configuration Utility

12D-Link WUA-2340 Quick Install Guide
Technical Support
D-Link’s website contains the latest user documentation and software
updates for D-Link products.
U.S. and Canadian customers can contact D-Link Technical Support
through our website or by phone.
United States
Telephone
[phone]
Twenty four hours a day, seven days a week.
World Wide Web
http://support.dlink.com
E-mail
[email protected]
Canada
Telephone
[phone]
Monday through Friday, 7:30am to 9:00pm EST.
World Wide Web
http://support.dlink.ca
E-mail
[email protected]
Version 1.0
Revised 12/012005
6WUA2340Q.01G
Copyright ©2005 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link, the D-Link logo are registered trademarks
of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their
respective owners. Maximum wireless signal rate based on IEEE Standard 802.11g specifications. Actual data throughput will
vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead lower actual data throughput rate. Product specifications, size and shape are subject to change without notice,
and actual product appearance may differ from that depicted on the packaging. Visit www.dlink.com for more details.