D-Link DSL-2730B Installation instructions

D-Link Technical Support – How to configure Web Filtering on the DSL-2730B. Page 1of 5






WebFiltering



ThisdocumentwilldetailhowtoconfigureWebFilteringontheDSL‐2730B.








D-Link Technical Support – How to configure Web Filtering on the DSL-2730B. Page 2of 5
NOTE:

The Web Filter feature cannot be configured to block websites to
specific computers. All computers on the network will be affected by the
filter.
1. Log in to the modem with the computer connected to the modem via Ethernet.
-URL: http://192.168.1.1 (default)
-Username: admin
-Password: admin (default)
-Graphic Authentication: (randomly generated)


D-Link Technical Support – How to configure Web Filtering on the DSL-2730B. Page 3of 5
2. SelecttheADVANCEDbuttoninthetopmenu.
3. SelectPARENTALCONTROLintheleftmenu,followedbytheBlockWebsitebutton.

D-Link Technical Support – How to configure Web Filtering on the DSL-2730B. Page 4of 5
4. ClickADDtocreateanewfilterrule.


D-Link Technical Support – How to configure Web Filtering on the DSL-2730B. Page 5of 5
5. EntertheURLofthewebsiteyouwishtoblockaccesstooe.g.http://www.youtube.com

-SelectScheduleifyouwishtosetthefilterto‘always’blockthesiteorselectapre‐
configuredschedule.

-SelectManualScheduletocreateanewscheduleinwhichthesitewillbeblocked.
6. Onceallinformationisset,clickonAPPLYtosavethechangesandverifywhetherthesites
arebeingblocked.