D-Link DWR-932 User manual

DWR-932
User Manual
4G/LTE Mobile Router
Version 1.00 | 09/04/2017

iD-Link DWR-932 User Manual
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify
any person or organization of such revisions or changes.
Manual Revisions
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United
States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks
of their respective companies.
Copyright © 2017 by D-Link Corporation, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission
from D-Link Corporation, Inc.
Revision Date Description
1.0 September 04, 2017 • Initial release
Preface

iiD-Link DWR-932 User Manual
Table of Contents
Product Overview..............................................................1
Package Contents.........................................................................1
System Requirements................................................................. 2
Introduction ................................................................................... 3
Hardware Overview.....................................................................4
Overview..................................................................................4
Battery Cover Removed...................................................... 5
LED Indicators........................................................................6
Installation.........................................................................7
Initial Setup..................................................................................... 7
Wireless Installation Considerations...................................... 8
Conguration.....................................................................9
Initial Connection to the Router .............................................9
Connect via USB....................................................................9
USB Tethering Driver Installation.................................... 9
Connect via Wi-Fi ................................................................10
Web-based Conguration.......................................................12
Conguration Utility..........................................................12
Navigation.....................................................................................13
Quick Access.................................................................................14
Network Setup.............................................................................15
Setup Wizard ........................................................................15
APN For LTE/3G...............................................................16
Connection Settings..........................................................16
Wi-Fi 2.4 GHz Access Name ........................................17
Wi-Fi Status ...........................................................................17
If you selected Basic Protection:...............................18
Admin Settings...............................................................19
Date & Time......................................................................19
Admin Settings....................................................................19
Apply Settings......................................................................21
Internet Settings.........................................................................22
Network Status....................................................................22
APN Settings.........................................................................23
APN Mode.........................................................................24
Connection Mode Settings .............................................25
Cellular Settings .............................................................25
SIM Card PIN Lock Settings .............................................26
My Operator (PLMN)..........................................................27
Operator Mode (PLMN) ...............................................27
Available Operators ......................................................28
Wi-Fi Settings ...............................................................................29
Wi-Fi Status ...........................................................................29
Basic Settings/Wi-Fi Security Settings.........................30
Wi-Fi 2.4 GHz SSID .........................................................30
If you selected Advanced Protection:.....................30
If you selected Basic Protection:...............................31
Advanced Settings .............................................................32
Wi-Fi 2.4 GHz....................................................................32
Wi-Fi WPS ..........................................................................33
Wi-Fi Clients ..........................................................................34
Table of Contents

iiiD-Link DWR-932 User Manual
Table of Contents
Settings ..........................................................................................35
Router LAN Settings ..........................................................35
LAN Setting......................................................................35
DHCP Settings......................................................................36
DHCP Service...................................................................37
MAC Filter ..............................................................................38
MAC Filter Settings........................................................38
Firewall Settings..................................................................39
Firewall Settings.............................................................39
IP Filter ...............................................................................41
Add IP Filter......................................................................42
Port Forwarding .............................................................43
Add Port Forwarding....................................................44
Advanced Options..............................................................45
UPnP...................................................................................45
Power Saving...................................................................46
System ............................................................................................47
System Information ...........................................................47
About DWR-932..............................................................47
Admin Settings....................................................................48
Account .............................................................................48
Language..........................................................................49
Date & Time......................................................................50
Settings Prole.....................................................................52
Export Proles.................................................................52
Import................................................................................53
Reset and Reboot...........................................................54
Firmware Upgrade..............................................................55
SMS..................................................................................................56
Short Messages ...................................................................56
USSD........................................................................................59
Connecting to a Wireless Network .................................60
Using Windows 10 .....................................................................60
Using Windows 8 .......................................................................62
Using Windows 7 .......................................................................64
Conguring Wireless Encryption ..................................66
Using Windows Vista™ ..............................................................69
Conguring Wireless Encryption ..................................70
Using Windows®XP ....................................................................72
Troubleshooting..............................................................73
Networking Basics...........................................................75
Check your IP address...............................................................75
Statically Assign an IP address...............................................76
Technical Specications..................................................77

1D-Link DWR-932 User Manual
Section 1 - Product Overview
Product Overview
Package Contents
D-Link DWR-932 4G/LTE Mobile Router
USB Cable
If any of the above items are missing or damaged, please contact your reseller.
ErP Power Usage
This device is an Energy Related Product (ErP) that automatically switches to a power-saving Network Standby mode within 1 minute of no
packets being transmitted. If it is not needed during certain periods of time, it can be unplugged to save energy.
Network Standby: 3.5 watts
EU Battery & WEEE Directives Disposal and Recycling
This product may contain a battery. Recycle or dispose of batteries in accordance with the battery manufacturer's instructions and local/national
disposal and recycling regulations. For more information, please refer to the warranty guide.

2D-Link DWR-932 User Manual
Section 1 - Product Overview
System Requirements
Network Requirements • A compatible mini-SIM/UICC card with mobile data service1
Web-based Conguration
Utility Requirements
Computer with the following:
• Windows®, Macintosh, or Linux-based operating system
Browser Requirements:
• Internet Explorer 9 or higher
• Firefox 12 or higher
• Safari 4 or higher
• Chrome 20 or higher
Windows®Users: Make sure you have the latest version of Java installed.
Visit www.java.com to download the latest version.
1 Subject to services and service terms available from your carrier.

3D-Link DWR-932 User Manual
Section 1 - Product Overview
Introduction
High-Speed Mobile Internet with LTE Connectivity
The DWR-932 4G/LTE Mobile Router gives you high-speed Internet wherever you are and lets you share it on the go. Using LTE technology, you can
achieve download speeds of up to 150 Mbps and upload speeds of up to 50 Mbps1. The built-in LTE antenna provides a reliable connection to your
mobile service provider, and a separate internal Wi-Fi antenna gives extended coverage to the computers and mobile devices connected to the
DWR-932.
Mobile Internet for All ofYour Devices
With the DWR-932, you can get online with your notebook, smartphone, tablet, or any other wireless device using a single mobile connection. The
DWR-932 provides high-speed Wireless N coverage, giving high-speed wireless access to everybody – whether you are with colleagues on a business
trip, or travelling with friends and family.
Built-in Software for Instant Access Anywhere
The DWR-932 is truly plug-and-play, with drivers already on the router, so you can connect without needing to install anything. Open a browser,
connect to the router, and you can set up your network right from the web interface. Once the device is set up, you can simply power it on to start
up your portable mobile network without any conguration, meaning that you can share your mobile Internet connection without even needing a
computer.
Designed forTrue Portability
The DWR-932 4G/LTE Mobile Router is small and slim enough to carry around in your purse, bag, or pocket.The built-in 2000 mAh rechargeable Li-Ion
battery can provide hours of mobile usage, so you can work online longer.
The D-Link DWR-932 4G/LTE Mobile Router lets you share a fast mobile Internet connection with multiple PCs and mobile devices letting you and your
friends enjoy the advantages of a wireless network anywhere, anytime. It oers 4G LTE and 3G HSPA+ compatibility for fast downlink and uplink data
rates, so you get fast upload and download speeds in areas without wired Internet.
1 All references to speed are for comparison purposes only. Actual speeds will vary depending on a range of factors including mobile network coverage, signal strength, network activity, and environmental conditions.

4D-Link DWR-932 User Manual
Section 1 - Product Overview
Hardware Overview
Overview
1 WPS Button Press this button to add new wireless devices quickly and easily using Wi-Fi Protected Setup (WPS).
2 Power Button Press and hold this button for 3 seconds to power on/o the device.
3 LED Indicators Status display. Please refer to LED Indicators on page 6.
4 Micro USB Connector Use the included cable to connect to a powered USB port kto charge the device, or connect to a
computer to access the conguration utility.
1
2
3
4

5D-Link DWR-932 User Manual
Section 1 - Product Overview
SI M
Hardware Overview
Battery Cover Removed
1 SIM Card Slot Insert a SIM card to access the Internet and your SIM card contacts list.
2 microSD Card Slot Insert a microSD card for additional data storage.
3 Reset Button Using a paper clip, press and hold this button for 5 seconds to reboot the unit.
Note: Ensure that the battery is inserted and the unit is powered on when pressing the reset button.
4 Wi-Fi Network (SSID) The network name (SSID) of the DWR-932 will be displayed here.
5Network (SSID)
Password The network (SSID) security key of the DWR-932 will be displayed here.
4
5
2
1
3
Model No.: DWR-932C
H/W Ver.: XX F/W Ver.: 1.00
P/N: EWR932.......C1E
IMEI: XXXXXXXXXXXXXXX
MAC: XXXXXXXXXXXX
S/N: RD2W1ymXXXXXX
Made in China
Input: 5V 1A
SSID: dlink_DWR-932
Password:XXXX

6D-Link DWR-932 User Manual
Section 1 - Product Overview
Hardware Overview
LED Indicators
24 3 51
Number Name Explanation
1Signal Strength Indicates signal strength. More bars indicates a stronger signal. No bars indicates no signal.
2Mobile Signal Type
Solid Blue Internet connection over LTE.
Blinking Blue Registered on an LTE network but not yet connected.
Solid Green Internet connection over 3G.
Blinking Green Registered on a 3G network but not yet connected.
Solid Purple Internet connection over 2G.
Flashing Purple Registered on a 2G network but not yet connected.
Red No Service/Device Error.
3SMS Inbox Blinking Blue New SMS message.
4Wi-Fi Indicator
Solid Blue Wi-Fi Active.
Blinking Blue Active Link.
Fast Blinking Blue WPS pairing in progress.
5Power Indicator
Green Power-on in progress.
Blue Fully charged or normal operation with battery about 60%.
Blinking Amber Charging.
Solid Amber Battery between 60% and 15%.
Blinking Red Battery less than 15%.

7D-Link DWR-932 User Manual
Section 2 - Installation
2.
3.
Initial Setup
Installation
This section will guide you through the installation process.
1. Remove the battery cover on the back of the device by gently prying it up from the case
using the corner notch, then remove the battery.
2. Note the SSID (network name) and password on the label on the battery cover. If you want
to connect to the DWR-932 wirelessly, you will need to enter this SSID and password.
3. Slide the SIM card frame to the right and lift up. Insert the SIM/UICC card into the SIM/
UICC card slot as shown, ensuring the gold contacts are facing down. Replace the frame
and slide it left to lock it in position.
Note: If you wish to use the onboard storage functionality,
you may install a microSD at this time.
4. Reinsert the battery and replace the battery cover.
5. Connect the Micro USB end of the USB cable to the Micro USB port on the bottom of the
DWR-932C and plug the other end into the USB port of the power adapter (not included)
or PC to charge the battery.
6. Press and hold the power button for three seconds to turn on the device. Once the power
LED changes from green to solid blue or amber, you may proceed with conguration.
Note: Always unplug and turn o the router before installing or removing the SIM card. Never
insert or remove the SIM card while the router is in use.
1.
SIM
SIM

8D-Link DWR-932 User Manual
Section 2 - Installation
Wireless Installation Considerations
The DWR-932 can be accessed using a wireless connection from anywhere within the operating range of its wireless network. Keep in mind that the
quantity, thickness, and location of walls, ceilings, or other objects that the wireless signals must pass through may adversely aect wireless signals.
Ranges vary depending on the types of materials and background RF (Radio Frequency) noise in your home or oce. The key to maximizing the
wireless range is to follow these basic guidelines:
1. Minimize the number of walls and ceilings between the router and other network devices. Each wall or ceiling can reduce your adapter’s range
from 1 to 30 meters (3 to 90 feet).
2. Be aware of the direct line between network devices. A wall that is 0.5 meters (1.5 feet thick) appears to be almost 1 meter (3 feet) thick at a
45-degree angle. At a 2-degree angle it appears over 14 meters (42 feet) thick. Position devices so that the signal will travel straight through a
wall or ceiling (instead of at an angle) for better reception.
3. Try to position access points, wireless routers, and computers so that the signal passes through open doorways. Materials such as glass, metal,
brick, insulation, concrete, and water can aect wireless performance. Large objects such as sh tanks, mirrors, le cabinets, metal doors, and
aluminum studs may also have a negative eect on range.
4. If you are using a 2.4 GHz cordless phone, make sure that the 2.4 GHz phone base is as far away from your wireless device as possible. The base
transmits a signal even when the phone is not in use. In some cases, cordless phones, X-10 wireless devices, and electronic equipment such as
ceiling fans, uorescent lights, and home security systems may dramatically degrade wireless connectivity.

9D-Link DWR-932 User Manual
Section 3 - Conguration
Conguration
Initial Connection to the Router
This section will show you how to congure your new D-Link mobile router using the conguration utility that can be accessed via your web-browser.
By default, the DWR-932 comes congured to work with most 4G SIM cards. Simply connect to it via Wi-Fi or use the included USB to access the
SIM’s Internet connection. If you wish to congure the router, you will need to establish a direct connection with the router in order to access the
web-based conguration utility. For information please refer to Connect via Wi-Fi on page 10. Once you have congured your router, you will
be able to connect using the Wi-Fi settings that you specied in the conguration process. Please ensure that the router is powered on and has
sucient battery power before commencing the setup process.
Connect via USB
To connect to the router via USB, plug the provided Micro USB cable into the Micro USB port on the side of the router, and plug the other end into
an available USB port on your computer.
USB Tethering Driver Installation
When you plug the DWR-932 into your computer, any necessary drivers will immediately
install. Your version of Windows may prompt you to conrm the driver installation.

10D-Link DWR-932 User Manual
Section 3 - Conguration
Connect via Wi-Fi
Note: The following example uses Windows 7’s built-in wireless connection utility. If you are using a dierent operating system, or a third party connection
utility, the process may be dierent. Please refer to the documentation that came with your operating system or wireless client for further information on
how to connect to a wireless network.
To connect to the router usingWi-Fi, open your operating system’s wireless networking utility
and scan for available networks to connect to. By default, the network name (SSID) of the
DWR-932 will be in the format dlink_DWR-932_xxxx, where “xxxx” represents the last four
characters of the DWR-932’s MAC address. The default SSID and password can also be found
on the product label attached to the battery cover. For more information on where to nd
this label refer to Hardware Overview on page 4.
Once you have located your DWR-932’s wireless network, select it and click Connect.
dlink_DWR-932_0816
dlink_DWR-932_0816

11D-Link DWR-932 User Manual
Section 3 - Conguration
You will then be prompted to enter the network security key for your router. Enter the security
key in the box provided and click OK. Your wireless connection utility will conrm that the
connection is successful, and you can move to the next step to continue to the conguration
process.
You can also set up a connection using the Windows built-in WPS feature. Please see
Connecting to a Wireless Network on page 60.

12D-Link DWR-932 User Manual
Section 3 - Conguration
Web-based Conguration
To access the conguration utility, open a web browser (such as Internet Explorer) and enter
the IP address of the router, which is 192.168.0.1 by default in the address bar.
Once you have reached the conguration utility through your web browser, you will need
to log in. Enter admin as the username, and then enter the password. By default, the
password should be left bank.
Click Sign in to continue.
Conguration Utility

13D-Link DWR-932 User Manual
Section 3 - Conguration
On the home page of the interface, you will nd a menu bar at the top of the page which includes tabs for easy navigation.
The Internet tab allows you to congure your Internet settings, including details about your mobile operator.
The Wi-Fi tab allows you to congure your Wi-Fi network, as well as add new devices using WPS.
The Settings tab allows you to congure rewall and security settings.
The System tab allows you to view system information, change your login information, and upgrade the rmware.
From the SMS tab, you can sent and receive SMS text messages, as well as USSD (Unstructured Supplementary Service
Data) codes, sometimes called“Quick Codes”or “Feature Codes.”
Navigation
Internet
Wi-Fi
Settings
System
SMS

14D-Link DWR-932 User Manual
Section 3 - Conguration
Quick Access
A quick access page will be displayed on the initial home page for the DWR-932. The headings below link through to windows where you can alter
settings in more detail.
This area displays your Internet provider, the type of
Internet service you are using, signal strength, and
your current data usage.
This area displays the length of connection time and
allows you to change between Always Connect and
Manual Connect.
The Wi-Fi section displays the number of devices
currently connected to the router via Wi-Fi.
This area displays the number of SMS messages in
your inbox and your draft massages.
This area displays whether power saving features
have been enabled, such as suspend mode.
Internet
Connection Mode
Wi-Fi
Short Messaging
Power Saving

15D-Link DWR-932 User Manual
Section 3 - Conguration
Network Setup
Setup Wizard
The Wizard page will guide you through the steps required to congure the basic settings of your router, such as the IP address, network name
(SSID), and password. Click on the Setup Wizard button to begin the quick setup wizard.

16D-Link DWR-932 User Manual
Section 3 - Conguration
Connection Settings
APN Selection Mode
Allow Data Roaming
APN
User Name and
Password (optional)
Choose to either automatically or manually select
an APN (Access Point Name).
Select this if you want to allow data roaming.
Enter your service provider’s APN.
Enter the username and password provided by your
service provider.
Auto (PAP & CHAP)
PAP
CHAP
Detect the correct combination of authentication.
Select this if your service provider uses this protocol.
Password Authentication Protocol. Select this if your
service provider uses this protocol.
Challenge Handshake Authentication Protocol.
Select this if your service provider uses this protocol.
Click Next to move to the next section.
In this section you can congure your connection settings. Depending on your mobile operator, you may have to input additional settings before
use. If so, please contact your service provider for this information.
If you choose to manually select an APN.
APN For LTE/3G