DèLonghi TRD40615TC User manual

5711010901/05.14_00
De’Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.com
Printed in China

TRD40615TC
OIL FILLED RADIATOR
Instructions for use. Keep these instructions
Visit www.delonghiregistration.com to register your product
Visit www.delonghi.com for a list of service centers near you.
ELECTRIC CHARACTERISTICS
120 V~ 60 Hz1500 W
RADIADOR ELÉCTRICO DE ACEITE
Repase y guarde estas instrucciones.
Lea cuidadosamente este instructivo antes de usar su aparato.
Visite www.delonghiregistration.com para registrar su producto
en línea.
Visite www.delonghi.com para ver la lista de centros de servicios
cercanos a usted.
CARACTERISTICAS ELECTRICAS:
120 V~ 60 Hz1500 W

2
EN ES
page 4 page 9

3
A
B
C
H
G
E
F
D
DESCRIPTION/DESCRIPCIÓN

4
INTRODUCTION
Thank you for choosing a De’Longhi product.
Please take a few minutes to read these instructions.
This will avoid all risks and damage to the appliance.
Symbols used in these instructions
Important warnings are identied by the symbols below.
It is important to respect the warnings.
Failure to respect the warnings could lead to electric shock,
serious injury, burns, re or damage to the appliance.
Danger!
Failure to observe the warning may result in life threatening
injury by electric shock.
Important!
Failure to observe the warning could result in injury or
damage to the appliance.
Danger of burns!!
Failure to observe the warning could result in burns or
scalds.
Please note:
This symbol indicates recommendations and important
information for the user.
IMPORTANT
SAFEGUARDS
When using any electrical appliance, some basic safety
precautions should always be observed to reduce the
risk of re, electric shock, and/or injury to persons. Read
all instructions carefully before using the appliance.
Specically:
Danger!
- Use this appliance only as described in this
manual. Any other use not indicated by the
manufacturer may cause re, electric shock,
or injury to persons.
- To prevent current overload and blown fuses,
make sure that no other appliance is plugged
into the same outlet or into another outlet
wired into the same circuit.
- CAUTION: To prevent electric shock, make
sure the wide prong of the plug is inserted in
the wide slot of the outlet.
- This heater is not intended for use in
bathrooms, laundry areas, or similar indoor
locations.
Never position the appliance where it may
fall into a bathtub or come in contact with
water.
- Do not insert or allow foreign objects to get
into the air intake or air outlet grille, as this
may cause electric shock or re, or damage
the appliance.
Important!
- The appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
- Donotoperate theappliancewith adamaged
cord or plug, after faulty operation, or when
it has been dropped or damaged in any way.
Contactthenearestauthorizedservicefacility
for examination, electrical or mechanical
adjustment, or repair.
- Do not use the appliance outdoors.
- If the power cord is damaged, to reduce the
risk of malfunction it must be replaced by the
manufacturer, its service agent, or a licensed
and qualied professional.
- Make sure that the plug is fully inserted into
the outlet.
Wall outlets may deteriorate with time,
so check the plug periodically for signs of
overheating or deformation. If the outlet
has deteriorated, stop using it and have it
repaired.
- Check that neither the appliance nor the
power cord have been damaged during
shipping.
- Do not place the heater near a bed because
objects such as pillows or blankets can fall o
the bed and be ignited by the heater.

5
Danger of burns!!
- This appliance gets very hot when in use.
To prevent burns, do not touch hot surfaces
with bare skin. Use the handle when moving
the appliance. Keep all ammable materials,
such as furniture, pillows, bedding, paper,
clothing, and curtains at least 3 feet (90 cm)
from the front and top of the appliance, also
avoid contact with the sides and back.
- Do not run the power cord under carpeting.
Do not cover cord with throw rugs, runners,
or the like.
Keep the cord away from any passageways
where it could be tripped over.
- To prevent a possible re, do not block air
intake or air outlet grille in any way.
Do not use the appliance on soft surfaces,
such as beds, where the openings may
become blocked.
- To prevent overheating and the risk of re,
do not cover the appliance while it is in
operation.
- The internal parts of the appliance can
become very hot or produce sparks during
operation. Do not use the appliance in areas
where gasoline, paints, or other ammable
liquids are used or stored.
- It is normal for heater’s plug and cord to feel
warm to the touch. However, an excessively
hot or deformed plug or cord is not normal
and may be the result of a defective electrical
outlet.
Defective outlets must be replaced before
using the heater. Plugging the heater into a
worn outlet may result in overheating of the
power cord or may cause the risk of re.
Please note:
- Always disconnect the plug from the power
outlet when the appliance is not in use.
- Do not wrap the cord around the appliance
immediately after use.
- Do not use this appliance with an extension
cord or power strip. Connect the appliance
directly to a suitable outlet.
- Make sure that no styrofoam or other packing
materials remain in the appliance.
- The rst time the appliance is used, run it at
the maximum power for at least two hours.
During this time, ventilate the room
thoroughly to eliminate the “new” smell
released by the appliance. It is completely
normal for the appliance to emit “creaking”
sounds the rst time it is run.
- Extreme caution is necessary whenever the
heater is left operating unattended.
- Do not open the appliance. No user-
serviceable parts inside.
SAVE THESE
INSTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD USE
ONLY
DESCRIPTION
A Thermostat
B Power setting knob
C/D/E Power indicator lights (MIN, MED, MAX)
F Timer
G Cord holder
H Wheel
USE
Fitting the wheels
Turn the radiator upside down on a rug or soft surface to
prevent damaging the paint nish. Fully unfold the wheels
by turning them outwards (Fig. 1). Turn the radiator back to
its upright position.
Caution
Always operate the heater in upright position only (wheels
on the bottom, controls on top).
Any other position could create a hazardous situation.
Fig. 1

6
Location
The heater must not be placed immediately below a power
outlet. Do not use this radiator in rooms having a surface
area of less than 43 square feet (4 sq.m.).
Connection
The radiator should be connected to a properly polarized A/C
110/120 V household outlet in perfect working condition.
Keep loose clothing or bedding, furniture and ammable
material away from the heater's wall outlet.
Turning on
Insertthe plug intoanelectricaloutlet,rotatethethermostat
knob to maximum and turn the unit on as follows using the
power selector:
- Turn the power selector to position MIN to select
minimum output (the min light will be on).
- Turn the power selector to position MED to select
medium output (the min/med light will be on).
- Turn the power selector to position MAX to select
maximum output (the lights will be on).
Adjusting the thermostat
When the room has reached the desired temperature, turn
the thermostat dial slowly in an anti-clockwise direction
until you hear a "click" and not beyond it. The thermostat
will then adjust the set temperature automatically and keep
it constant.
If your unit is a three-output version, in intermediate
seasons or on days when temperatures are not particularly
cold, select minimum output to optimize savings and
consumption.
Antifreeze function
Turn the thermostat dial to the position and the power
selector to position MAX. The appliance will maintain
a minimum room temperature of approximately 41°F
(5°C), thus preventing freezing while conserving energy.
In models that come with a timer, tabs must be set in the
inward position.
Reminder
To completely shut the appliance o, turn the power
selector to the "0" position and then unplug the appliance
from the outlet.
UNITS WITH TIMER
Clock setting
The program/timer, as with all clocks, must be set to the
correct time. If for example the time is 9:30 a.m. (day zone),
rotate the dial clockwise (following the direction of the
arrow) until 9:30 is aligned with the triangular pointer.
IMPORTANT: DO NOT ROTATE CLOCK DIAL COUNTER-
CLOCKWISE.
The timer is like an electric clock, and will only work when
plugged into a power supply. When unplugged, the timer
stops and must be later re-set.
How to use the timer
To program heating, proceed as follows:
- Look at the time on your clock or watch. If it is 10 p.m.,
turn the numbered timer disk clockwise until the
number 22 (10 p.m.) on the disk coincides with the
pointer s(3) on the timer. Set the periods of time
when you want the appliance to work by pushing
the teeth (1) inward. Each tooth (1) corresponds to
a period of 15 minutes. This will leave visible sectors
which correspond to the periods of operation (2).
When set, the radiator will operate automatically each
day during the times programmed (important: the
radiator must always be plugged into the socket).
- To change the programming, move the teeth back
into the initial position and set the new periods of
operation.
- If you want to make the appliance operate without
programming, push all the teeth inward. In this case,
Your product is equipped with a polarized alternating
current line plug (a plug having one prong wider than the
others). This plug will t into the power outlet only one
way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug
should still fail to t, contact your electrician to replace
your obsolete outlet. Do not attempt to modify the plug to
bypass this safety feature.

7
to turn the appliance o completely, as well as turning
the knob to the o position, you must also unplug it
from the power outlet to avoid continued operation of
the timer.
SAFETY DEVICE
A safety device switches the heater o in the event of
overheating. Please call the De Longhi customer service.
MAINTENANCE AND SERVICE
Always remove the plug from the power outlet and allow
the radiator to cool. Wipe radiator with a soft damp cloth, do
not use detergents and abrasives.
Should the radiator not be in use over a certain length of
time, wind the cord around the cord holder and store it in a
dry place. This appliance has been built to give many years
of trouble free service. In case of malfunction or doubt, do
not try to repair the heater by yourself: this may result in
a re hazard or electric shock. Call the De'Longhi Customer
Service.
TECHNICAL CHARACTERISTICS
Power supply See rating plate
Absorbed power “
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The appliance doesn't work - Be sure it is plugged in and that the
electrical outlet is working.
- Check for any obstruction.
- The temperature may be set too low.
- Plug into the power outlet.
- Remove the obstruction and let the
appliance cool down. If the appliance
doesn't work please contact the
De'Longhi Customer Service .
- Set the temperature to a higher position.

8
LIMITED WARRANTY
This warranty applies to all products with De’Longhi or Kenwood brand names.
What does the warranty cover?
We warrant each appliance to be free from defects in material and workmanship. Our obligation under this warranty is limited
to repair at our factory or authorized service center of any defective parts or part thereof, other than parts damaged in transit.
In the event of a products replacement or return, the unit must be returned transportation prepaid.The repaired or replacement
model will be returned at the company expense.
This warranty shall apply only if the appliance is used in accordance with the factory directions, which accompany it, and on an
Alternating current ( AC ) circuit.
How long does the coverage last?
This warranty runs for one year (1) from the purchase date found on your receipt and applies only to the original purchaser for
use.
What is not covered by the warranty?
The warranty does not cover defects or damage of the appliance, which result from repairs or alterations to the appliance
outside our factory or authorized service centers, nor shall it apply to any appliance, which has been subject to abuse, misuse,
negligence or accidents. Also, consequential and incidental damage resulting from the use of this product or arising out of any
breach of contract or breach of this warranty are not recoverable under this warranty. Some states do not allow the exclusion or
limitation of incidental or consequential damage, so the above limitation may not apply to you.
How do you get service?
If repairs become necessary, see contact information below:
U.S. Residents: Please contact our toll free hotline at 1-800-322-3848 or log onto our website at www.delonghi.com
Residents of Canada: Please contact our toll free hotline at 1-888-335-6644 or log onto our website at www.delonghi.com
Residents of Mexico: Please contact our toll free number 01-800-711-8805 for assistance or log onto our website at www.
delonghi.com
The above warranty is in lieu of all other express warranties and representations. All implied warranties are limited to the
applicable warranty period set forth above. This limitation does not apply if you enter into an extended warranty with
De’Longhi. Some states/countries do not allow limitations on how long an implied warranty lasts, so the above exclusions may
not apply to you. De’Longhi does not authorize any other person or company to assume for it any liability in connection with
the sale or use of its appliance.
How does country law apply?
This warranty gives you specic legal rights, and you may also have other rights, which vary from state to state/country to
country.