D-MAX STANDALONE H.264 User manual

STANDALONE H.264
DIGITAL VIDEO RECORDER
USER MANUAL

2
Before usage
The User manual is for DVR installation and operation.
The User who install the device first or Qualified Personal, before installing DVR, has to read user
manual carefully and follow warning instructions avoiding malfunction of operation or product
failure. Refer all servicing to qualified service personnel or suppliers while install and set the DVR.
Keep these operation instructions handy for future reference.
Warnings for safety
The user has to keep in mind of followings for safety usage and well-operation.
ㆍ Do not shock during installation or Product carried
ㆍ Do not expose to shock or vibration.
ㆍ Do not move while the product is operating.
ㆍ Do not plug out while the product is operating.
ㆍ After power off, clean the DVR only dry towel.
ㆍ Do not put out Plug code, touch power plug with wet hands.
ㆍ Do not place heavy object on power code, it may cause power code damage, occur fire or
electric shock
ㆍ Install stable place and keep proper temperature, if install the DVR in sealed place, it may
cause a fire. .
ㆍ Do not install humidity place, electronic hazard, moisture.
ㆍ Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptables.
ㆍ Recommend to use protect device to prevent failure through blackout or lighting.
ㆍ Do not expose direct sunlight and install near radiators, heat registers or other apparatus
that produce heat.
ㆍ Do not place near flammable spray or any heat source, cause of flammable material,
it may cause a fire
ㆍ Do not damage, Blend, twist, modified, pull out, heat power code, it may cause damage
power code or outlet.
ㆍ Do not insert the metals such as a coin, a hair pin, a piece of iron or flammable Material such
as a paper, a matchstick, etc. in the DVR, It may cause a fire or an electric shock
ㆍ Contact the supplier after turn off the DVR, when odor smoke or smell in the DVR.

3
Approved HDD List
(February, 2011)
Capacity Manufacturer HDD MODEL Name F/W Ver.
250G
Western Digital
HDD 250G
SATA
WD2500AVVS 63L2BO
WD2500AAJS 22B4A0
Hitachi
HDS721025CLA382
HDS721025CLA382
HCS5C1025CLA382
Seagate ST3250312CS SC13
320G Seagate HDD 320G
SATA ST3320418AS CC38
500G
Western Digital
HDD 500G
SATA
WD5000AVVS 63H0B1
Seagate ST3500418AS CC38
ST3500312CS SC13
Hitachi HCS5C1050CLA382
Hitachi HDS721050CLA362
750G Western Digital HDD 750G
SATA WD7500AACS
1TB Seagate HDD 1TB SATA
ST31000528AS CC38
ST31000322CS
WD10EADS 00L5B1
HCS5C1010CLA382
HDS721010CLA332
1.5TB Seagate HDD 1.5TB
SATA
ST31500341AS
Western Digital WD15EARS 00Z5B1
2TB
Seagate
HDD 2TB SATA
ST32000542AS
Western Digital WD20EARS 00Z5B1
Hitachi HDS722020CLA330
[Warning] Please use approved HDD avoiding malfunctions of operation, if the user want
to use other HDD, Please contact to supplier and check the HDD is available or not.

4
- CONTENTS -
1. OVERVIEW
∙ Features ………………………………………………………………………………………………………..……………………….…...……..6
2. INSTALLATION
∙ Package Contents .………………………...………………………….…………………………………………………………….…..…….7
∙ Part Names and Functions (Front) …………………….………………………………………………………………....….……...8
∙ Part Names and Functions (Rear) …………………..…………………………………………………………………….….………9
3. SYSTEM OPERATION
∙ Menu Setup ……………….…………………….……………………………………………………………………..………………...…….10
∙ Icons ……………………….……………………………………………………………………………………………………..……………..…10
∙ Using Remote Control …………………………………………………………………………………….………………………….…..12
∙ How to setup Remote ID ……………………………………..…………………………………………………………….…….…....13
4. SYSTEM CONFIGURATION
∙ System Setup ……………….…………………………………………………………………………………..…..……..………………….15
∙ Time/Date ……………….…………………….……………………………………………………………….………………...…….…….…16
∙ Password ……………….………………………..…………………………………….……………………………………………….…….….17
∙ Hard Disk ……………….………………………………….……………………………………………………………………….……..…….17
∙ Default Setup ……………….…………………..…………………………………………………………………………….…..…….…….19
∙ Upgrade ……………….………………………………………………………………………………………………………………………....19
∙ Button Setup ……………….…..………..……………………………………………………………………….……………….….….……20
∙ RS-485 ……………….……………………………..……………………………………………………………….……………….….….…….21
5. DISPLAY SETUP
∙ OSD ………………..……………………………………………………............................................................................................….22
∙ Auto Sequence ………………..……….………………..…………………………………………………..……………..…..…………….22
∙ TV Adjustment ……………….………..…….…………..………………………………………………………………..………..…..……23
6. NETWORK SETUP
∙ IP Address Setup ………………...…………………..………………………………………………………………….…………….…….24
∙ Web Server ………………..………………………..……………………………………………………………………...………….……….25
7. CAMERA SETUP

5
∙ Camera …………………...…………………….………………………………………………………………………..……..………….…..…26
∙ PTZ Setting ……………………………..…………………………….….…………………………………………………………….....……26
∙ Using Pan/Tilt ………………………….……………………….…………………………………………………………………..…....……28
8. RECORD SETUP
∙ Recording Setting …………………..….…………………………..……….……………………………………………………...……….30
∙ Schedule Record …………………..…….…………………………..……….……………………………………………………..……….31
∙ Holiday Record ………………….……..........…………………………..……….………………………………………………...……….32
9. EVENT SETUP
∙ Sensor ……………………………………...…..……………………………………………………………………………………….…………34
∙ Motion Detection …………………..….……………………..………………………………………………………………...……..……34
∙ Camera Tamper Detection ……………………...……………….…………………………………………………..…………....……36
∙ Event Action …………………..……………………………………………………………………………………….…………………..…..36
10. SEARCH SETUP
∙ Search ………………….…………………………………..…………………………………………………………….…………………..……41
∙ Calendar Search ………………….…………………..…………………………………………………………….…………………..……41
∙ Date/Time Search ………………….………………………..………………………………………………………………………………43
∙ Event Serach …………………..…..………………………..…………………………………………………………………………….……44
∙ Play Control ………………….……………..………………..……….………………………………….…………………….……….…......45
∙ Audio …………………...…………………………..……….………………………………………………………….……………….……......46
11. BACKUP SETUP
∙ Bckup …………………………………………………………..……………………………………………….……………………….…………47
12. APPENDIX
∙ Specification ……………………………...……………..…………………………………………………………….……………....………52
∙ Product Warranty ………………………………………...………………………………………………………………………………….53
1. OVERVIEW

6
The DVR employs H.264 video encording 4 channel input, audio encoding for 4 channels while
simultaneously supports hard disk recording and playback. The DVR has mirroring function,
mirroring HAD record and display regardless of unexpected physical shock or demage.
Main Features
ㆍControl Pan / Tilit by using Mouse or Joystick
ㆍ2 USB ports for easy back-up
ㆍODD Back up available (Option)
ㆍFull Frame transfer under GIGA network available
ㆍMulti language
ㆍDynamic IP Internet access available
ㆍDual-Stream network transfer available
ㆍSupport D1 resolution each channel independently
ㆍCMS software
ㆍProvide software for Smart phone, IP viewer, Network Viewer
Application
√ Bank, ATM unit, Supermarket, Convenient store and other public places.
√ Private homes, Apartment, Jewelry shop, Commercial compound and other places
where it needs anti theft surveillance system.
√ Warehouse, Production line and other places where evidence is needed
after any event happened and to analyze the situation.
√ Where to monitor sites remotely
2. INSTALLATION
Features

7
Please unpack the product, and place the product on a flat place or in the place to be installed.
Please check the following contents are included in addition to the main unit.
Packa
g
e Contents
Part Names and Functions (Front)
DIGITAL VIDEO RECORDER
HDD Fixing Screws (5pcs)
Batteries for
Remote Control
(AAAX2)
Adaptor
Remote
Controller
Power
Cable
User Manual
CD

8
(Front Panel)
[1] Sequence of 4-Split and Auto Sequence in order by pressing more than 3 seconds
[2] USB Connection Port
[3] Channel Keys
[4] Remote Control Receiver LED
[5] LED Indicator (Power/REC/HDD Status/Network)
[6] Buttons for Direction / Select / Play / Pause
[7] MENU
[8] PTZ Control
[9] Search
[10] Audio
[11] Emergency Recording
[12] Backup
Part Names and Functions (Rear)

9
[1] Audio Out : Output Port for the Audio Signal
[2] Audio In (1~4) : Input Port for the Audio Signal
[3] Video In : Input Port for composite Video Signal
[4 Video Out : BNC Type of Output Port for the composite Video Signal
[5] VGA : Output Port for VGA Video Signal
[6] NETWORK : Network Connection Port
[7] Alarm / Sensor / RS-485 (When you connect to PTZ Cameras)
( Refer to the detailed settings in each part in the manual.)
[8] Power : Port to be connected to DC 12V/3.5A Power Source

10
3. SYSTEM OPERATION
The MENU can be operated by pressing the Front Menu Button or using the Remote Control.
☞ Using Front Buttons
1) Press the “MENU” Button.
2) Use the Direction Keys and to selece the MENU and “MENU” Button for “ESC”
☞ Using Remote Control
-Press “SETUP” Button .
☞ Using Mouse
1) Right-click any area of the screen and the MENU will pop up.
2) Left-click to enter the MENU.
[1] The Icons indicate the Status in Live Mode.
[2] CAM ID : Camera ID will be shown same as the below picture.
Icons
Menu Setu
p

11
[3] Recording Status Icon
REC
Video Loss
Motion Detected
Sensor Detected

12
[4] Status Bar
• Date / Time
• “ER” : Emergency Recording / “SR” : Schedule Recording
• Network Connection / Screen Lock
• Shows the available capacity of the Hard Disk and “OVERWRITE” when you write again above
the current datas.
z
You can control all the functions with this Remote Control.
It’s easy to carry and available to operate Multi DVRs’ with 1 Remote Control.
[1] ID : If you want to control Multi DVRs’ in 1 Remote Control, put this “ID” to select each
number.
[2] SPLIT : Displays the selected “Split Mode” same as you put in the “MENU”.
(same function as “QUAD” in the Front panel.)
Usin
g
Remote Control

13
[3] BACKUP : To use USB MEMORY STICK for BACKUP
[4] AUDIO : Turns AUDIO ON/OFF and you can select each channel.
[5] SEQ (Sequence) : Displays “Auto Sequence” and the Channels automatically you set.
[6] PTZ : To control Pan/Tilt/Zoom Camera
[7] SEARCH : To search the Recording Datas
[8] Number (0 ~ 10) : Used as the numeric input keys (to display a single channel or put the
password)
[9] SETUP : Displays “SETUP MODE”
[10] Up/Down/Left/Right/Play/Pause/Enter: Moves the cursor up/down/left/right, runs the selected
Menu, and controls the Play/Speed/Pause during the Play.
[11] REC : Starts or ends the live/scheduled Recording and Emergency Recording.
To control Multi DVRs in 1 Remote Control, you have to set each ID before using it. If the ID
between the DVR and Remote Control is different, you cannot use it correctly.
How to setu
p
Remote ID

14
[1] Changing the Remote ID
1) Check the Remote ID in ‘SYSTEM” Menu.
2) Menu Æ System Æ Information Æ Remote ID (0 ~ 99)
* The Default Setting is “0”. If you control Multi DVRs in only 1 Remote Control, put different
ID Numbers.
* Use the Remote Control only when you change the ID. If you use the Front Keys, the ID is
not changed correctly.
3) Press the “ID” Button on the Remote Control and then you can see the menu to
change the DVR ID. (Refer to the above picture.)
√ ID : displays the current Remote ID of the selected DVR.
√ “0” : Input the same ID Number with Number Keys and then press “Confirm” to save it.

15
4. System Configuration
[1] Remote ID : Assign the ID of Remote Control so that user can separately control Mun\lti
DVRs with 1 Controller. (ID Range : 0 ~ 99)
[2] Mouse Sensitivity : Changes the Sensitivity Level for the Mouse for user’s convenience.
( Basic : 1, to increase the reaction speed : 1 < 2 < 3 )
[3] Language: Selects your Language.
[4] Version : Shows S/W, H/W, N/W Versions
[5] Health : Displays the status of its Storage
• Hard Disk1 : The temperature of the HDD
• USB1 /USB2: The status of the Connection of USB Port at the Front Panel
[6] Video Detect Mode : Selects a Video Signal (NTSC/PAL)
[7] Video Mode : Displays currect Video Signal Format.
[8] Web code : DDNS ID when you control the DVR remotely with DDNS Connection
[9] Mac Address : Its own Mac Address.
S
y
stem Setu
p

16
[1] Time : Set the Time
[2] Date : Set the Date
[3] Date Format : Year(YYYY), MOnth(MM), Day(DD)
[4] Day Light Saving Time (Summer Time) : If you select “Yes”, the time makes 1 hour earlier than
the GMT of its time zone.
[5] Time Server : Synchronizes the Time automatically with Time Server Service.
√ Time Server : Input the URL of the server (Default : kr.pool.ntp.org )
√ synchronize Period : Selects the period to synchronize the Time between the DVR and Server
ㅇ Power On : Sync when the Power On.
ㅇ 12Hour : Sync every 12 Hours.
ㅇ 24Hour : Sync every 24 hours.
ㅇ Off : Not use to Sync.
[4] Time Zone : Selects a GMT Zone
[5] Apply : Saves the Time / Date
Time/Date

17
[1] ID : You can use till 8 IDs at most. (Admin ID & User ID:1~7)
[2] Function : You can set the permissions of each user to access te below menus.
ㅇ Configuration
ㅇ Hard Disk
ㅇ Search
ㅇ Back up :
ㅇ PTZ Setting
ㅇ REC Key at the Front Pannel
ㅇ Camera
This HDD Management is closely connected to the “Record” Menu. It may cause the malfunctions
if the setup is wrong so make sure that it is set correctly.
[Note] Default ID : “11111111”
Password
Hard Disk

18
[1] Hard Disk List : shows the HDD information including External Disks and supports Format.
ㅇ Hard Disk1 : the Capacity of Hard Disk Drive
ㅇ USB1 : the Capacity of external USB1 connected
ㅇ USB2 : the Capacity of external USB2 connected
ㅇ Erase Data : Selects and format the Disk you choose
[2] Total : Displays the capacity of HDD ( Total Size / Used Size)
[3] Erase Data : Formats the datas for selected disks
ㅇ Main Disk : Deletes the datas in Main Disk.
ㅇ Mirror Disk : Deletes the datas in Mirror Disk.
[4] Auto Delete : Keeps the recorded Datas in HDD only for specified period (Range : 1~120 days).
The datas before this perioed will be deleted automatically.
[5] Advanced : Selects the Hard Disk to “Main Disk” or “Mirror Disk”. After choosing one of them,
press “Apply” to save this option.

19
[1] Default Setup : Initializes the system excluding major configurations like Network, Password,
Recording Setup.
[2] Factory Setup : Initializes all the system to the factory default.
[1] USB Upgrade : To upgrade the firmware, you can use USB Memory Stick by connecting it to
U
pg
rade
Default Setu
p

20
the Front Port 1 or 2.
Firmware
USB Memory Stick
[2] Configuration BACKUP : Back-up DVR configuration in USB memory stick.
[3] Configuration LOAD : Down load desired DVR configuration in other DVR.
This makes the screen be locked automatically after selected time is passed,
You have to log in again if the screen is locked for this Setting.
zSelecting Time : 10 sec/ 30sec/ 1 min/ OFF)
[NOTES]
Do not turn off the power or remove the USB stick during this backup. It may cause the
malfunctions and please contact us if it is stopped without any message.
Button Setu
p