AlienDVR DSD105 User manual

The new Alien Digital Video Recorder
Operations Manual
Model DSD105
Version 2.0
4 Channel Real Time DVR
Networkable
Mobile Phone Monitoring

2
Table of Contents Page
Welcome 4
Important Safeguards and Warnings 4
1. Features 5
Local functions 5
2. Installation 6
2.1 Checking the DVR and its Accessories 6
2.2 HDD Installation 6
2.3 Rear Panel Description 7
2.4 External Alarm In/Out 8
3. Operational Instructions 9
3.1 Front Panel 9
3.2 IR Controller 11
3.3 Menu Description 13
3.3.1 Menu Items 13
3.3.2 Menu Operation 14
4. Basic Operation Guide 15
4.1 Username and Password 15
4.2 PTZ Control 17
4.3 Manual Record 19
4.4 Playback 20
4.5 Backup Recorded Files 22
4.6 Shutdown DVR 24
5. Parameter Setup Guide 25
5.1 Administrator and Password 25
5.2 Add and Delete User 26
5.3 Device ID 29
5.4 Video Output Standard 30
5.5 OSD Setup 30
5.6 Camera Input Adjustment –Camera Settings 32
5.7 Camera Input Adjustment –Mask Area Setup 32
5.8 View Tampering Alarm 33
5.9 Video Loss Alarm 34
5.10 Motion Detection Alarm 35
5.11 Preview Properties 37
5.12 Recording Setup 38
5.13 External Alarm Input and Relay Output 40

3
5.14 Network Parameters 45
5.15 PTZ 47
6. Utilities 49
6.1 Default Parameters 50
6.2 Firmware 51
6.3 Hard Disk 52
6.4 Alarm Out 53
6.5 Reboot 53
6.6 Power Off 53
6.7 View Log 53
6.8 System Information 55
7. Firmware Upgrade 56
7.1 FTP Server Setup 56
7.2 Upgrade Mode 58
8. Web HTTP Operation 59
8.1 Network Connection 59
8.1.1 Login and Logout 59
9. Networking a Digital Video Recorder 60
9.1 Configure the DVR to operate with a modem router 60
9.2 For Beginners 61
9.2.1 How do I set my PC to obtain an IP address
automatically? 62
9.2.2 How do I set my PC’s IP address Manually? 62
9.2.3 How do I find out my PC’s IP address? 62
9.2.4 How do I use Ping to test a Connection to my
DVR? 62
9.2.5 How do I configure a Router for Remote
Access? 63
9.2.6 How do I find the On-Line Support? 63
9.3 Option 1: Connect a DVR directly to a single PC 64
9.4 Option 2: Connect a DVR to a switch or hub 65
9.5 Option 3: Connecting for Internet Access 66
9.6 Network Cable Connections 67
Appendix A Hard Disk Capacity Information 68
Appendix B Recording Timetable 69
Appendix C Specifications 70

4
Welcome
Thank you for purchasing our DVR!
This operating manual is designed to be a reference tool for the installation and
operation of your system.
Here you can find information about this series DVR features and functions, as well
as a detailed menu tree.
Before installation and operation please read the following safeguards and warnings
carefully!
Important Safeguards and Warnings
1 Electrical Safety
The installation and operation should conform to local electrical safety codes.
2 Transportation Security
Avoid placing equipment on top of this DVR and do not subject the unit to strong
vibration or water during transportation, storage and installation.
3 Installation
Always install the unit in an upright position. Handle with due care.
Do not apply power to the DVR before completing the installation.
Do not place objects on the DVR or restrict air flow to this DVR.
4 Qualified Engineers Needed
Only entrust examination and repair work by qualified service engineers.
We are not liable for any problems caused by unauthorised modifications or attempted
repair.
5 Environment
The DVR should be installed in a cool, dry place away from direct sunlight,
inflammable, explosive substances etc.
Note: Note that the manufacturer of this product reserves the right to make
modifications to the DVR and/or these instructions without prior notice.

5
1 Features
The DSD105 DVR uses the embedded MCU and realtime operating system
combining the most advanced technology in the information industry. It incorporates
video and audio encoding and decoding, hard disk record and TCP/IP. The firmware
is installed in the flash drive and is very stable and reliable.
The DSD105 has both the features of a digital video recorder and a digital video
server. It works as a standalone unit or can be incorporated into a powerful
surveillance network, suitable for use in banks, telecommunication, transportation,
warehouse, clubs and public houses etc.
Compression
Supports video loop, CIF and QCIF resolution, multi area motion detection, OSD and
changeable OSD position, LOGO and changeable LOGO position.
Local functions
Record
Supports multiple record type, including realtime, manual record, motion detection,
external alarm, motion&alarm, motion/alarm.
Supports 1 SATA Hard Drive, FAT32 file system, HDD SMART technology, cycle
or non cycle record, backup of recorded files and clips.
Supports USB memory, USB HDD, USB CD-R/W, USB DVD-R/W, IDE CD-R/W
and IDE DVD-R/W.
Preview and Playback
Supports analogue monitor and VGA output, multiple preview modes, sensitive area
mask, camera alarm block, single channel playback by file or time and displays local
record status.
PTZ
Supports numerous PTZ protocols, presets, sequence and cruise.
Alarms
Supports exception alarm, motion detection alarm, external alarm etc.
Others
Supports IR control and multi-level user management.
Network
Supports TCP, UDP, RTP, Multicast for network preview and PPPoE for broadband.
Supports remote parameter setup, can send alarm information to remote centre,
network control PTZ, network record live stream, network download and play back
recorded files in DVR and remotely upgrade firmware.

6
2. Installation
2.1 Checking the DVR and its Accessories
When you receive the product, check that all the items are included in your package.
There is a list in the package.
2.2 HDD Installation
The DSD105 is not fitted with a Hard Drive unless purchased separately. The size of
the Hard Drive can be calculated according to the total capacity required. A table is
supplied at the end of this manual.
This DVR uses one SATA Hard Drive up to a maximum of 1 Tb.
First remove DVR case top.
Fit hard drive to base plate with screws.
Connect SATA data cable correctly and then power cable. Ensure cables are fitted
tightly.
Refit DVR case top and power up unit.
Ensure HDD is formatted before use. Details can be found in this manual.

7
2.3 Rear Panel Description
This section provides information about the rear panel. When you install this series
DVR for the first time, please refer to this part first.
No. Function Description
1USB Port Not functional
2Video Inputs 4 Channels standard BNC
3Video Output Monitor 1 BNC Video Out
4Video Output Monitor 2 BNC Video Out
5Audio Input 1 channel RCA (1.0v p~p, 75 ohm)
6Audio Output 1 channel RCA (1.0v p~p, 75 ohm)
7LAN Interface Network connection
8VGA Interface VGA display
9Alarm Relay 1 alarm output
10 Ground Alarm ground
11 RS485 RS485 connections for PTZ telemetry control
12 Alarm In Alarm connections
13 12vDC Connection of 12vDC power supply
14 Power Switch Switch power on/off
1
2
7
4
5
8
11
10
9
12
14
13
3
6

8
2.4 External Alarm In/Out Connection
Alarm Input Port:
G (GND): Connect the GND sensor
1 ~ 3 : Alarm Input supporting normally open or normally closed.
Alarm Output Port:
1 ~ : Relay Output
Alarm Output Connection
Please note the usage of jumper JJ1. If you use DC, either connection is okay. It is
suggested that you use 12vDC at less than 1 Amp.
If you use AC, ensure the jumper is opened. There are jumpers on the mainboard
corresponding with each alarm output. The default is closed.
WARNING: IF YOU USE AC FOR RELAY OUTPUT, ENSURE THE
RELEVANT JUMPER IS OPENED.

9
3. Operational Instructions
3.1 Front Panel
No: Type Name Description
1
2
3
USB Port
DVD Writer
Function Keys
USB Port
DVD Writer
1/MENU
2ABC
3DEF
4GHI/ESC
5JKL/EDIT
6MNO/PLAY
7PQRS/REC
8TUV/PTZ
USB 2 Port
DVD Writer
1. Switch from preview mode to
MENU mode.
2. WIPER control
3. Press MENU for >5secs to cancel
beep sound.
2 ZOOM –in PTZ control
3 ZOOM + in PTZ control
ESC Cancel & back to previous menu
1. In edit mode delete current character
2. IRIS in PTZ control
3. Select üor xto enable or disable
1. Local playback
2. AUTO in PTZ control
1. Manual Record
2. SHOT in PTZ control (adjust preset)
1. Enter PTZ control
2. IRIS in PTZ control
1
2
3
654

10
No: Type Name Description
3
4
5
Function Keys
Status Lights
Control Keys
Power
9WXYZ/PREV
O/A
SHIFT
PWR
READY
STATUS
ALARM
RECORD
NETWORK
Direction Keys
ENTER
POWER
1. Multi-screen preview switch
2. Switch MENU mode to PREVIEW
FOCUS- in PTZ control
1. Input switch (number, lower case,
upper case & symbol)
2. FOCUS+ in PTZ control
3. In Preview mode, display or hide the
channel status bar.
Switch between numeric keys and
function keys
GREEN DVR working
RED DVR powered off
NO LIGHT No power supplied
DVR is ready
GREEN You can use Remote
RED Alarm detected
RED Flickering HDD in use
Network Status
1. MENU mode, use / to
select and / to edit.
2. PTZ direction.
3. Playback speed
1. Menu confirmation
2. Select üor xto enable or disable
3. Pause playback
Power button
NOTE: SHIFT button is used to switch between numeric keys and function keys

11
3.2 IR Controller
No: Name Description
1POWER Turn Off Device
2DEV Enable/Disable IR Remote Control
3Numeric Keys Same as numeric keys on front panel
4EDIT Same as EDIT key on front panel
5 A Same as A key on front panel
6REC Same as REC key on front panel
7PLAY Same as PLAY key on front panel
8INFO Same as INFO key on front panel
9VOIP
10 MENU Same as MENU key on front panel
11 PREV Same as PREV key on front panel
12 Direction Keys
ENTER Same as direction keys on front panel
13 PTZ Same as PTZ key on front panel
14 ESC Same as ESC key on front panel
15 Reserved
16 F1
17 Lens Control Iris, Focus and Zoom for lens control
18 F2

12
Loading the batteries in IR Controller
1. Remove battery cover.
2. Insert battery ensuring polarity correct.
3. Replace battery cover.
Start the IR Controller
Press DEV key and input the DVR I.D (default is 88 but can be changed in the
Display Menu and then press ENTER key. Check that the IR Status light is displaying
green.
Stop the IR Controller
When the IR status is on, press the DEV key again to turn off the IR Controller. The
status lamp will now switch off and the IR Controller will not operate the DVR.
Switching the DVR off
When the IR Controller status is on, press the POWER key for several seconds and
the DVR will power off.
Troubleshooting the IR Controller
If the IR Controller does not operate the DVR normally then check the following
items:
1. check battery connections
2. check battery charge
3. check there is nothing covering the DVR IR sensor.

13
3.3 Menu Description
3.3.1 Menu Items
Menu Function Menu Function
Display
Unit name
Device ID
Require Password
Screen Saver
Video Standard
Brightness
Menu transparency
VGA resolution
DST
Date and Time
Camera
Camera name & position setup
Adjust brightness, contrast, hue
and saturation
OSD display mode, position
and OSD format setup
Mask area setup
View tamper area and response
setup
Video signal loss
Motion detection sensitivity,
area and response setup
Recording
Overwrite/Stop recording
Resolution and recording
Parameters setup
Record Schedule
Prerecord time
Postrecordtime
Network
DVR IP Address
DNS IP
Multicast IP address
Remote Host IP and Port
NAS IP and directory
PPPoE username & password
Alarms Alarm input (NO/NC) Alarm response & PTZ
linkage
Alarm output & schedule
Alarms Exception type
Exception response
PTZ PTZ parameters Preset setup
Sequence setup
Cruise setup
User Add or delete user
Password setup or change
User rights setup
Display
Preview mode
Switch Time
Enable/Disable audio
preview
Preview layout
Utilities
Restore parameters
Upgrade firmware
HDD Management
Clear Alarm Output
Reboot
Power Off
View Log
System Information

14
3.3.2 Menu Operation
How to enter menu mode
Press MENU key to enter DVR Main menu
Press PLAY key to enter Playback menu
Press REC key to enter Manual Record menu
Press PTZ key to enter PTZ control interface.
Special Note: You must input username and password. The default username is
admin and the password is 12345.
Main Menu Description
The small rectangular frame allows the user to move to the required menu option. To
move, use the or keys on the Control Key Direction Unit (CKDU).
When you have selected the required icon press Enter (this is the center keyon the
CKDU).

15
4. Basic Operation Guide
4.1 Username and Password
This DVR is supplied with a default user of admin and password of 12345
You cannot change the admin username but the password can be modified.
The Login dialogue box is shown below:
Press right arrow key to enter password box.
To enter default password select 12345 and then press the Enter button.
Note that you can select a different password using numerics or alpha by pressing
the A key. For alpha you will need to select the correct letter similar to a mobile
phone text message. If there is an alarm sounded the username and password are not
matched. After three error attempts the DVR will enter Preview mode.
To modify the password you must access the User menu.

16
To add a new user and password press the Add button and enter username. Now enter
the Password and verify by re-entering password.
SPECIAL NOTE: Please refer to section 5 regarding the setting of access rights. If
these rights are not set then new users will not be able to operate this DVR.

17
4.2 PTZ Control
In preview mode press PTZ key and in login mode select username and password.
You can now enter the PTZ control interface. Note that the user must have the PTZ
control rights set.
In menu mode press the PTZ menu..
There is a PTZ Control prompt in the PTZ control interface. The displayed camera
name details the name of the camera you are controlling.
Select Channel
In PTZ control mode you can press the numeric keys to select a channel. If DVR has
less than 10 channels, press one numeric key to select. For example to select camera
2 press the 2 key. If the DVR has 10 or more channels you must press two numeric
keys to select channel number. For example for camera 2 you must select keys 0 and
2 simultaneously and for camera 12, select numeric keys 1 and 2.
PTZ Control Keys
Direction keys
Zoom keys ZOOM+ ZOOM-
Focus keys FOCUS+ FOCUS-
Iris keys IRIS+ IRIS-
Adjust Preset keys REC/SHOT
Auto Control key PLAY/AUTO
Wiper Control key WIPER/MENU
Light Control key LIGHT/F1
Auxiliary Control AUX/F2

18
Adjust Preset Number
In PTZ control mode, press the REC/SHOT key, and then press the preset number
(three numeric keys) and the relevant preset can be selected. Press REC/SHOT key
again and change the preset number. When you exit PTZ control mode, the camera
will stay at the current position.
Note: The PTZ preset number is set already. Please refer to PTZ menu for preset setup
instructions. Firmware version 1.4 upwards can support up to 28 presets.
Start/Stop auto in PTZ control mode
In PTZ control mode press PLAY/AUTO key to start PTZ auto function. Press
PLAY/AUTO key again to stop. When PTZ is in auto mode and you exit this mode
the PTZ will continue to auto function. You must enter the PTZ control mode again
and press the PLAY/AUTO key to stop.
Exit PTZ control mode
Press ESC or ENTER to exit and return to preview mode.

19
4.3 Manual Record
The user must have the corresponding rights to use this facility. In preview mode
press the REC key and enter the username and password to enter the Manual Record
interface. In menu mode press the REC key to enter Manual Record directly.
Channel: Lists the channel numbers available on this DVR
Status: Channel status has four modes
X = idle
Green = channel recording (schedule, motion or alarm)
Red = network transmission
Orange = recording and network transmission
Start/Stop ü=start corresponding channel recording
X = stop corresponding channel recording
Start All Press this button to start all channels recording
Stop All Press this button to stop all channels recording
Exit Manual Record
Press ESC key to enter preview mode. Press MENU key to enter main menu.
Press PLAY to enter playback menu. Press PTZ key to enter PTZ control mode.

20
4.4 Playback
The user must have playback rights. In preview mode press the PLAY key, select
username and password to enter playback interface. In menu mode press the PLAY
key and enter playback interface directly.
Note that this DVR only supports one channel playback.
Chan: Use or keys to select one channel.
Rec. Type: Use or keys to select recorded files. There are 5 file types that
can be selected: All = All files
All Time = All schedule recordings
Motion Detect= Motion detection files
Alarm = Alarm recorded files
Manual = Manually recorded files
Time: Enter the “From and To” date and time selected
Search: Search the matched recorded files and display them in list box. If no
files are found a corresponding dialogue box is displayed.
Play by Time:Playback the recorded channel based on time section.
Select Page: In the file list box, only 8 files are displayed per page. If the selection
covers more than 8 files these can be seen by selecting further pages. Up to 500 pages
containing a maximum of 4000 files can be searched at one time. Use the numeric
keys or the up and down arrow buttons to selected the required page.
File List Box: This lists the matched files. File start time and file size are displayed.
Use the up and down arrow keys to move the scroll bar to select file.