Da-Lite Roll-AroundMarker Boards User manual

Printed in U.S.A. 53114 Rev. 6/02
DA-LITE IS MORE
THAN PROJECTION SCREENS
Da-Lite Tripod, Wall &
Ceiling and Electric Screens
Da-Lite Overhead
Projectors
Da-Lite Lecterns
Communications
Cabinets
Da-Lite
Project-O-Stands
and Easels
Da-Lite
Model 5000 Portable
POWER
PRESENTATION PRODUCTS
The
In
Instructions For
Roll-Around
Marker Boards
DA-LITE SCREEN COMPANY, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: [phone]
800-622-3737
Fax: [phone]
http:// www.da-lite.com
e-mail: [email protected]

ASSEMBLY INSTRUCTIONS
NOTE: It requires two people to assemble this
easel.
1. Place upright “A” on flat surface with thread-
ed holes facing up.
2. Place chalk tray “B” on upright “A”; insert
four (4) 1/4”-20 screws into holes and tighten
with screwdriver.
3. Stand partially assembled frame on casters.
4. Stand upright “C” on casters with holes fac-
ing chalk tray “B”. With four (4) 1/4”-20
screws, attach chalk tray “B” to upright “C”
and tighten with screwdriver.
5. Insert one (1) #14 x 2" screw through top hole
in outisde of upright “A” and “C” and to cen-
ter hole on marker board “D” and tighten for
stability.
6. Insert second #14x2" screw through bottom
hole in upright “A” and “C” and into hole on
marker board “D” and tighten.
7. Your roll-around marker board is now ready for
use.
CASTERS
CASTERS
#14 X 2"
WOOD SCREW
UPRIGHT
“A”
1/4"-20 X 5/8"
MACHINE
SCREW
UPRIGHT
“C”
MARKER BOARD “D”
CHALK TRAY “B”
HARDWARE PACKAGE CONTAINS:
81/4- 20 x 5/8" Screws
4#14 x 2" Screws