Dabir Surfaces DabirAIR User manual

Accessory Bracket Installation Guide
Important Before You Start
Please read the “Instructions-for-Use” device manual carefully and completely before using Dabir products.
Failure to do so may result in decreased performance or product failure. See Dabir Instructions for Use
(DOC# R01-0006-00004) for system operation.
DabirAIR® Accessories: Assembly Steps (Example: Bed Rail Bracket - Other mounting brackets may
apply)
1. To prevent product damage, prepare your work table area by covering it with a protecve cloth or mat.
2. Idenfy key components and features of the device prior to assembly.
3. Firmly locate the Bracket hook into the
Controller receiving pocket on the underside of the
Controller. (Proper locang is crical for Step 4.)
4. Hand adjust bracket posion such that the
threaded inserts and bracket holes align.
5. Insert the two threaded fasteners and ghten.
(DO NOT OVERTIGHTEN)
6. The bracket assembly is now complete.
NOTES:
Follow these same assembly steps for
other DabirAIR mounng accessories.
(Assembly tool and screws included.)
Electronic copy available at www.dabir-surfaces.com/IFU
DOC# R01-0006-00190-EA
1
Controller receiving pocket
(Boom side of Controller shown)
Bracket Hook
Finished
Assembly
Controller
Step 3
Bracket
Cap Screws
Align and install
Threaded Fasteners
Steps 4 & 5
Threaded Inserts

Headquarters:
Manufacturer:
Sales Contact:
Dabir Surfaces, Inc., 7447 West Wilson Ave., Harwood Heights, IL 60706, USA Tel: [phone]
Dabir Surfaces, Inc., 7447 West Wilson Ave., Harwood Heights, IL 60706, USA Tel: [phone]
[email protected]
[email protected] Tel: [phone]
www.dabir-surfaces.com
Emergo Europe, Prinsessegracht 20, 2514 AP The Hague, The Netherlands
Technical and Warranty Support:
Website:
European Authorized Representative: DOC# R01-0006-00190-EA
2
Installaon Examples
Cleaning Procedures
Bed Foot-board and IV Pole Aachment
Now that the assembly steps are complete, simply hang the DabirAIR Controller o the foot end of the bed or
other stable vercal surface. IV Pole accessory bracket requires manual ghtening of clamps to pole.
CAUTION: Do not sit or stand on Dabir Controller.
CAUTION: Prior to use, allow one hour for Device to acclimate to room temperature.
CAUTION: Small objects present a choking hazard.
CAUTION: To avoid injury, keep hands, ngers and other body parts away from potenal pinch points.
Please reference the manufacturer’s “Instrucons-for-Use” device manual for recommended cleaning
procedures. Adjust if needed to accommodate specic healthcare facility policy.
CAUTION: Aggressive cleaning measures may cause damage. It is the responsibility of the
caregiver to replace product when needed.
General Cleaning Instrucons
Disinfect by wiping down all areas with a hospital grade disinfecng cleaner and water making sure to remove
any organic debris. Allow for proper drying me per the disinfectant manufacturers instrucons.
IV Pole Stand
CAUTION: Only use DabirAIR cered Accessories when operang this Device.
CAUTION: It is the responsibility of the caregiver to ensure that the Device is mounted securely.
Bed Foot-board
Electronic copy available at www.dabir-surfaces.com/IFU