DAE Coat Hanger GERMAINE ral 3000 User manual

Coat Hanger GERMAINE (ral 3000)
Designer: Oscar Tusquets, Lluís Clotet i Ballús
© Copyright , Oscar Tusquets, Lluís Clotet i Ballús 1968
© Copyright DAE 2017
[email protected] · Rambla dels Països Catalans, 10 Nave 25, Vilanova i la Geltrú · Postal code: 08800, Barcelona · Phone: [phone]

Assembly instructions
1- Present, level and mark the 2 holes.
2- Drilling
3- Place tacos
4- Position the two rear supports and screw the two 5 mm screws.
JOIN ANOTHER HANGER
The hanger has two lateral holes, one through and one threaded.
1- Insert the 4 mm screw into the through-hole and tap it. Present, level and mark the 2 - Holes.
2- Drilling
3- Place tacos
4- Position the two rear supports and screw the two 5 mm screws.

[email protected] · Rambla dels Països Catalans, 10 Nave 25, Vilanova i la Geltrú · Postal code: 08800, Barcelone · Phone: [phone]
General
Assembly instructions
Read these warnings carefully.
The coat rack is designed to be fixed to the wall.
Due to the different types of materials existing today in the construction, we supply the standard wall anchoring screws, not
including dowels. Check with the manufacturer of the material for advice. Sometimes the client has had to change it.
The non-use of the products for the purposes that are designed, exempts us from any responsibility.

[email protected] · Rambla dels Països Catalans, 10 Nave 25, Vilanova i la Geltrú · Postal code: 08800, Barcelone · Phone: [phone]