Dagan CMP-USBEXTEND7 User manual

USB2.0 Extender 4 Ports
480Mbps 60m via CAT6
CMP-USBEXTEND7
VER 1.0
User Manual

1
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before
connecting operating or adjusting this product. Please keep this manual for future reference.
Package Contents
Compliance
This product is compliant with below standards
Name
Qty
USB2.0 Transmitter (TX, local unit)
1 PC
USB2.0 Receiver (RX, remote unit)
1 PC
USB Input Cable (1.5m, black, M/M)
1 PC
Power Adapter (for receiver)
1 PC
User Manual
1 PC
Standards
Versions
USB
2.0
CE
√
FCC
√
RoHS
√
WEEE
√

2
1. Introduction
The CMP-USBEXTEND7 USB2.0 Extender allows you to transfer USB2.0 data through a
single CAT5e/6 UTP cable. Max. distance is up to 60m and the transfer rate is up to High-
Speed 480Mbps. It is backward compatible with older version.
2. Features
Using CAT6 cable to extend USB2.0 signal up to 60m;
High-Speed 480Mbps;
4 USB2.0 ports on receiver;
Backward compatible with older version;
Plug-and-play
Support OS: Win7/10, Mac, Linux
3. Specifications
Function
Description
Connectors
Transmitter
USB Input
USB Type A (F) x1, black
Network Connector
RJ45 (F) x1
*The power adapter for the Transmitter is NOT a must.
Receiver
USB Outputs
USB Type A (F) x4, black
Network Connector
RJ45 (F) x1
Power Input
DC Jack (black), 12V/2A
Technical Data
USB Standards
USB2.0 High-Speed 480Mbps
Max. Distance
60m by CAT6 UTP cable
Compatibility
USB2.0 or 1.1 devices
USB Input Cable
1.5m Type A, M/M, black
Operating System
OS Supports
Win7/10, Mac, Linux
LEDs
Transmitter
Power LED x1
Receiver
Power LED x1
Environmental
Operating Temp.
0 - 40°C
Humidity
5-85% RH, Non-Condensing
Physical Properties
Housing
Aluminum
Weight
TX 120g, RX 130g
Dimension (L x W x H)
TX/RX: 7.5 x 9.7 x 2.9cm
Power Adapters
Input: AC 100 –240V 50/60Hz; Output: DC 12V/2A

3
4. Components
4.1 Transmitter (TX, local unit) Panel
Name
Function Description
PWR
Power LED Indicator
USB Input
Connects with a host computer
RJ45
Connects with the Receiver’s RJ45 port
DC 12V
Optional Power Input Port to connect with a DC 12V/1A
adapter, this adapter is not a must, the transmitter will
take power from the Input USB Cable.
* This power adapter is not included in the package.
4.2 Receiver (RX, remote unit) Panel
Name
Function Description
RJ45
Connects with the Transmitter’s RJ45 port
DC 12V
Connects with a power adapter
*Only the Receiver requires a power adapter, and it is
included in the package.
USB HUB
Four USB2.0 Type A outputs, female.
5. Installation Diagram