Dagan KVM-EXTEND38 User manual

4K60Hz HDMI KVM Extender
True 4K 60m/197ft / HDMI Loop Out / DSC
P/N: KVM-EXTEND38
VER 1.0
User Manual

1
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before
connecting operating or adjusting this product. Please keep this manual for future reference.
Package Contents
Compliance
This product is compliant with below standards
Name
Qty
HDMI KVM Transmitter (TX, Local Unit)
1 PC
HDMI KVM Receiver (RX, Remote Unit)
1 PC
IR Emitter/Receiver
1 SET
Power Adapters
2 PCS
User Manual
1 PC
Standards
Versions
HDMI
2.0
HDCP
2.2
CE
√
FCC
√
RoHS
√
WEEE
√

2
1. Introduction
It is an USB based KVM Extender that features an HDMI Loop Out functionality, which
enables to operate a computer on an UHD 4K HDMI monitor locally, while providing console
access from a separate location at least 60m away. It extends the transmission range of
4K HDMI, USB keyboard & mouse control signals up to 60m (4K) or 100m (1080P),
enabling users to place the computer system in a secure and temperature-controlled
environment, which maybe isolated from users’ workstation.
2. Features
Using CAT6 cable to extend HDMI signal up to 60m by 4K, or 100m by 1080P;
Bases on VESA Display Stream Compression (DSC) standard;
UHD 4K HDMI loop out at Local Unit;
Support USB consoles (USB keyboard, USB mouse, HDMI monitor);
Support IR remote control;
Support analog 3.5mm stereo audio signal extracted from the HDMI stream;
Compliant with HDMI 2.0 HDCP 2.2 standards.
3. Specifications
Function
Description
Connectors
Transmitter
Video Input
HDMI Type A (F) x1, black
Video Output
HDMI Loop Out, HDMI Type A (F) x1, black
USB In
USB 2.0 Type A (F) x1, black
IR Out
20 –60KHz, 3.5mm audio jack (F) x1
Audio
Audio output, 3.5mm audio jack (F) x1
Network Connector
RJ45 (F) x1
Power Input
DC Jack (black), 5V/1A
Receiver
Video Output
HDMI Type A (F) x1, black
Consoles
USB1.1 Type A (F) x2, black,
IR In
20 –60KHz, 3.5mm audio jack (F) x1
Audio
Audio output, 3.5mm audio jack (F) x1
Network Connector
RJ45 (F) x1
Power Input
DC Jack (black), 5V/1A
Video
Max. Data Rate
18Gbps (6Gbps / lane)
Max. Pixel Clock
600MHz
Compliance
HDMI 2.0 HDCP 2.2
Max. Resolution
2160P@60Hz, 1080P@60Hz
Max. Distance
60m by 4K@60Hz 4:4:4, 100m by 1080P
Audio
Input
HDMI Type A (F) x1
Output
HDMI Type A (F) x1, 3.5mm analog audio jack (F) x2
Control
IR
20 –60KHz, 3.5mm audio jack (F)

3
Consoles
USB keyboard, USB mouse
LEDs
Transmitter
Power LED (red) x1, SIG In (blue) x1, SIG Out (blue)
x1, Link (blue) x1, RJ45 (green/yellow) x1
Receiver
Power LED (red) x1, SIG Out (blue) x1, Link (blue) x1,
RJ45 (green/yellow) x1
Environmental
Operating Temp.
0 - 40°C
Humidity
5 - 85% RH, Non-Condensing
Physical Properties
Housing
Metal
Weight
Transmitter 450g, Receiver 450g
Dimension (L x W x H)
Transmitter/Receiver: 122x89x24 mm
Power Adapters
Input: AC 100 –240V 50/60Hz; Output: DC 5V/1A
4. Components
4.1 Transmitter (TX, Local Unit) Panel
Name
Function Description
USB IN
Connects with a host computer
IR Out
Connects with an IR Emitter cable
Audio
Analog audio signal extracted from the HDMI stream,
connects with a 3.5mm stereo speaker/headphone
HDMI OUT
Connects with a local 4K HDMI monitor
HDMI IN
Connects to a host computer’s HDMI output port
RJ45
Connects to the Receiver/Remote Unit via a CAT6 cable
SIG Out
Blue LED flashes if the HDMI OUT port connected
Link
Always on blue LED means Transmitter function properly
SIG In
Blue LED lights up if the HDMI IN port connected
Power
Red LED lights up if power on
DC5V
Connects with a power adapter, 5V1A
Ground Interface

4
4.2 Receiver (RX, Remote Unit) Panel
Name
Function Description
RJ45
Connects with the Transmitter via a CAT6 cable
SIG Out
Blue LED flashes if an HDMI monitor connected
Link
Always on blue LED means the Receiver function properly
Power
Red LED lights up if power on
DC5V
Connects with a power adapter, 5V1A
Ground Interface
USB OUTPUTS
Connects with an USB keyboard, an USB mouse. USB1.1
IR In
Connects with an IR Receiver cable
HDMI OUT
Connects with an HDMI monitor
Audio
Analog audio signal extracted from the HDMI stream,
connects with a 3.5mm stereo speaker/headphone
5. Installation Diagram