Dahua Technology DH-TPC-BF2221-HTM Operator's manual

© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
Installation and
configuration guide
(Lite Version)
DH-TPC-BF2221-HTM
IVSS7008-1I
Blackbody
Ver.1.0
1

© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
The purpose of this guide is to give you a clear understanding
of how to install and configure the Human Body Temperature
measurement system, from Dahua technology Co., Ltd
Aim and Purpose
2

Table of content
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
3
Tab l e of Co n t e n t
General Description .................................................................................................................................. 4
Installation preparation ............................................................................................................................ 5
Environment .............................................................................................................................................. 6
Installation ................................................................................................................................................ 7
Mounting camera and Blackbody ......................................................................................................... 8
Wiring .................................................................................................................................................. 15
Connecting Monitor and mouse ......................................................................................................... 16
Configuration .......................................................................................................................................... 17
IVSS startup wizzard ............................................................................................................................ 18
Add camera to IVSS ............................................................................................................................. 20
Setup perimeters for Camera and Blackbody ..................................................................................... 22
adjust Camera and Blackbody ............................................................................................................. 23
Test solution ........................................................................................................................................ 23
Installation precautions .......................................................................................................................... 26
Wayfinding .............................................................................................................................................. 30
Stickers ( Install stickers to ensure proper wayfinding/people Flow .................................................. 30
FAQ .......................................................................................................................................................... 31

Installation Guide
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
•Become familiar with the application of Dahua Thermal Body Temp. Measurement Solution
•Get the necessary knowledge of equipment, installation and wiring, etc.
•Understand how to use the system
•Understand how to debug the system
•Get the knowledge of the solution FAQ;
Dahua Technology Co., Ltd is presenting a thermal camera solution that is capable of highly accurate
body temperature measurement ±0.3℃(with blackbody). Built-in AI algorithm for multi-person
measuring up to 2m distance, which enables fast and non-contact. This solution is working with an
IVSS server which can provide an overview during monitoring with temperature measurement as the
main focus and trigger multiple alarms generated from this, furthermore, we can generate statistics
and search for specific groups with high temperature.
General Description
4

Installation Guide
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
Installation preparation
BlackbodyThermal Network Value Hybrid
Bullet Camera
DH-TPC-BF2221-HTM
IVSS7008-1I Server
Poe Switch
5 Port
Monitor
DHL32-F600
2X Tripod incl Brackets HDMI Cable
10M Ethernet Cable
Make sure to check if all these
devices/materials are present
5

Installation Guide
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
Environment
•It is required that the visible light channel has enough illumination and avoid the influence of
backlight, reflection, change of strong light and occlusion, etc.
•It is forbidden to have high-temperature heat source or sunlight in the thermal imaging
picture, to avoid the interference of heat source such as a heater, hot water point, microwave
oven, high-power lamp, radiator, etc., so as to avoid the damage of detector.
•The installation area shall be relatively isolated from the outside environment without wind
and stability, to avoid the outdoor or the scene connected with the outside, which is not
suitable for the environment with airflow or strong electromagnetic interference or vibration.
6

Installation Guide
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
Installation
7

Installation Guide
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
•The area needs to be
defined and marked
clearly with pullout
safety barriers or similar.
•The flow of People
should, in this case,
begin from the left and
exit in the bottom right
side, it could be
opposite as long as
diagram 2 is followed.
Installation Diagram
1
8
90cm

Installation Guide
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
RIGHT
PLACEMENT
Here the person in not blocking the line of
sight between camera and Blackbody.
Here the person is blocking the line of sight between
camera and Blackbody, which will affect the accuracy.
Installation Diagram
WRONG
PLACEMENT
2
9
2M
90cm

Installation Guide
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
Installation Diagram
3
•Here it is shown how the
placement of Blackbody
and camera should be if
we need the flow to
start from left-to-right or
from right-to-left.
•It is just important that
we make sure a person
is not able t block the
line of sight between
Blackbody and camera
during the temperature
measurement. 10

Installation Guide
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
Installation of Blackbody
1. The Bracket is mounted to the tripod
without tools.
2. The Blackbody is now mounted to the
bracket with the provided Hex screw.
3. The picture to the right illustrates it.
11

Installation Guide
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
Settings of Blackbody
1. Power up the Blackbody by connecting
the 230V socket provided and turn it
on.
2. Turn up the temperature to 35°by
clicking the upwards arrow until the
temperature is set.
3. Wait 30 minutes until the Blackbody is
ready but continue the installation
while the Blackbody gets ready.
Confirm by checking the temperature
afterward.
12

Installation Guide
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
Installation of Camera
1. The bracket is mounted to the camera
with the 4 screws provided.
2. The camera with bracket is now
connected to tripod.
3. The picture to the right illustrates it.
13
DH-TPC-BF2221-HTM

Installation Guide
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
•As shown, the distance
between the camera
and Blackbody would be
2 Meters.
•Height of Blackbody
should be 1.8 Meter
measured from
underneath the device.
•The Height of the
camera should be 2
Meter measured from
underneath the device.
Installation Diagram
4
14
200cm
200cm
180cm

Installation Guide
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
Poe Switch
5 Port
230V
Ethernet Cable
•Connect the Camera to
port 1 in the PoE switch
with the ethernet cable
provided.
•Connect the IVSS Server
with the Ethernet cable
provided to port 1 and
the PoE switch to port 5.
•All the connections
should look like the
picture to the right.
IVSS7008-1I Server
230V
Ethernet Cable
Wiring the devices
15
DH-TPC-BF2221-HTM

Installation Guide
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
Poe Switch
5 Port
Ethernet Cable
IVSS7008-1I Server
230V
Ethernet Cable
230V
230V
Monitor
DHL32-F600
•Install the monitor and
connect it to 230V,
connect the HDMI cable
provided between
Monitor and IVSS.
•Connect the mouse
provided to control the
IVSS.
•This is how the complete
setup should look like.
•Installation is done but
might need slight
adjustment during
configuration.
Connecting monitor
Blackbody
16
DH-TPC-BF2221-HTM

Configuration Guide
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
Configuration
17

Configuration Guide
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
IVSS Startup Wizard
•The IVSS server wizzard
will take you through to
the most nessesary
settings from start up.
1. Startup page.
2. Choose your region and
language.
Click ”Next”
3. Agree to terms and
conditions.
Click ”Device Initialize”
18

Configuration Guide
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
7. Here we should set an IP
address for the IVSS server
network card 1.
Click the icon as shown to set
8. We are setting the IVSS to be
192.168.1.100 as an example.
We just need to make sure
camera is in the same range
192.168.1.xxx
Click ”Next”
9. P2P function is not nessesary
to set, it is for push
functionallity, and internet
connection is required for it to
work.
Click ”Next”
4. Confirm timezone, set time
and date.
Click ”Next”
5. Choose a password that
contains a between 8-32 Digits
consisting of letter(s) and
number(s), symbol(s) at least
two types.
Click ”Next”
6. Enter an Email ( not the
shown in the picture) to be
able to recover the admin
password.
It is also possible to choose
security questions, and answer
accordingly to reset password.
19

Configuration Guide
© 2019 Dahua. All rights reserved. Design and specifications are subject to change without
notice. Pictures in the document are for reference only, and the actual product shall prevail.
Add camera and configure perimeters
12. Click the ”+Add” Button to
add a camera.
13. Click ”Search” to find the
camera connected, it might
take a couple of second, wait
till the search is finnished
before trying to initializing the
camera.
14. Now ”Click” the tag button
on the camera and click the
Initialize button.
10. Next part is to add the
camera to the IVSS, Click the
“gear” in the top right as
shown.
11. Click the ”Device” menu.
20