1
1General Introduction
1.1 Overview
This series IP camera integrates the traditional camera and network video technology. It adopts
audio video data collection, transmission, storage together. It can connect to the network directly
without any auxiliary device.
This series IPC uses standard H.264 video compression technology and PCM, G.711a/u audio
compression technology, which maximally guarantees the audio and video quality.
This series IPC has mega pixel resolution and supports 12V DC/24V AC power. It supports the
wireless network application, bidirectional talk, digital water mark and etc.
It can be used alone or used in a network area. When it is used lonely, you can connect it to the
network and then use a network client-end. Due to its high definition, multiple functions and
various applications, this series IPC is widely used in many indoor environments and other
important area surveillance.
1.2 Feature
User
Management
zDifferent user rights for each group, one user belongs to one group.
zThe user right can not exceed the group right.
Data
Transmission
zSupport cable network data transmission via Ethernet
zWireless device supports WIFI/3G wireless data transmission.
Storage
Function
zSupport central server backup function in accordance with your configuration and
setup in alarm or schedule setting
zSupport record via Web and the recorded file are storage in the client-end PC.
zSupport local SD card hot swap. Support short-time storage when encounter
disconnection.
zSupport network storage such as FTP.
Alarm
Function
zReal-time respond to external on-off alarm input, and video detect as user pre-
defined activation setup and generate corresponding message in screen and audio
prompt(allow user to pre-record audio file)
zReal-time video detect: motion detect, camera masking.
Network
Monitor
zIPC supports one-channel audio/video data transmit to network terminal and then
decode. Delay is within 270ms (network bandwidth support needed)
zMax supports 20 connections.
zAdopt the following audio and video transmission protocol: HTTP, TCP, UDP,
MULTICAST, RTP/RTCP, RTSP and etc.
zSupport web access.
Network
Management
zRealize IPC configuration and management via Ethernet.
zSupport device management via web.
zSupport various network protocols.
Peripheral
Equipment
zSupport peripheral equipment connection via the RS232 port, each peripheral
equipment control protocol and interface can be set freely.
zSupport serial port (RS232/RS485) transparent data transmission.
zSupport the on-off alarm device to alarm via the sound or the light.
Power zExternal power adapter. Support DC 12V/AC 24V power supply.
PoE zSupport Power over Ethernet (PoE). Conform to the IEEE802.3af standard.
zConnect the device to the switcher or the router that supports the PoE function to