Dahua DHI-NVR608R-64-4KS2 User manual

Network Video Recorder
Quick Start Guide
V1.0.0

I
Foreword
General
This quick start guide (hereinafter referred to as "the Manual") introduces the functions and
operations of the NVR device (hereinafter referred to as "the NVR").
Safety Instructions
The following categorized signal words with defined meaning might appear in the Manual.
Signal Words
Meaning
Indicates a high potential hazard which, if not
avoided, will result in death or serious injury.
Indicates a medium or low potential hazard which, if
not avoided, could result in slight or moderate injury.
Indicates a potential risk which, if not avoided, could
result in property damage, data loss, lower
performance, or unpredictable result.
Provides methods to help you solve a problem or
save you time.
Provides additional information as the emphasis and
supplement to the text.
Revision History
Version
Revision Content
Release Time
V1.0.0
First release.
July 2020
Privacy Protection Notice
As the NVR user or data controller, you might collect personal data of others such as face,
fingerprints, car plate number, Email address, phone number, GPS. You need to be in
compliance with the local privacy protection laws and regulations to protect the legitimate
rights and interests of other people by implementing measures including but not limited to:
providing clear and visible identification to inform data subject the existence of surveillance
area and providing related contact.
About the Manual
●The Manual is for reference only. If there is inconsistency between the Manual and the
actual product, the actual product shall prevail.
●We are not liable for any loss caused by the operations that do not comply with the Manual.
●The Manual would be updated according to the latest laws and regulations of related
regions. For detailed information, see the paper manual, CD-ROM, QR code or our official
website. If there is inconsistency between paper manual and the electronic version, the
electronic version shall prevail.
●All the designs and software are subject to change without prior written notice. The product
updates might cause some differences between the actual product and the Manual.

II
Contact the customer service for the latest program and supplementary documentation.
●There still might be deviation in technical data, functions and operations description, or
errors in print. If there is any doubt or dispute, refer to our final explanation.
●Upgrade the reader software or try other mainstream reader software if the Manual (in PDF
format) cannot be opened.
●All trademarks, registered trademarks and the company names in the Manual are the
properties of their respective owners.
●Visit our website, contact the supplier or customer service if there is any problem occurred
when using the NVR.
●If there is any uncertainty or controversy, refer to our final explanation.

III
Important Safeguards and Warnings
The following description is the correct application method of the NVR. Read the Manual
carefully before use to prevent danger and property loss. Strictly conform to the Manual during
application and keep it properly after reading.
Operating Requirements
●Install the PoE cameras indoors.
●Do not place and install the NVR in an area exposed to direct sunlight or near heat
generating device.
●Do not install the NVR in a humid, dusty or fuliginous area.
●Keep its horizontal installation, or install it at stable places, and prevent it from falling.
●Do not drip or splash liquids onto the NVR; do not put on the NVR anything filled with
liquids, in order to prevent liquids from flowing into the NVR.
●Install the NVR at well-ventilated places; do not block its ventilation opening.
●Use the NVR only within rated input and output range.
●Do not dismantle the NVR arbitrarily.
●Transport, use and store the NVR within allowed humidity and temperature range.
Power Requirements
●Use batteries according to requirements. Otherwise, it may result in fire, explosion or
burning risks of batteries!
●To replace batteries, only the same type of batteries can be used.
●Dispose the exhausted batteries according to the instructions.
●Use electric wires within rated specifications recommended by local regulations.
●Use standard power adapter matched with this NVR. Otherwise, the user shall undertake
resulting personnel injuries or NVR damages.
●Use power supply that meets SELV (safety extra low voltage) requirements, and supply
power with rated voltage that conforms to Limited Power Source in IEC60950-1. For
specific power supply requirements, refer to device labels.
●Products with category I structure shall be connected to grid power output socket, which is
equipped with protective grounding.
●Appliance coupler is a disconnecting device. During normal use, keep an angle that
facilitates operation.

IV
Table of Contents
Foreword.................................................................................................................................................... I
Important Safeguards and Warnings.................................................................................................... III
1 Local Operations................................................................................................................................... 1
1.1 Starting the NVR............................................................................................................................ 1
1.2 Initializing the NVR........................................................................................................................ 1
1.3 Configuring Network..................................................................................................................... 4
1.4 Adding IP Camera......................................................................................................................... 6
1.4.1 Initializing IP Camera............................................................................................................ 6
1.4.2 Adding IP Camera by Search Result ................................................................................ 10
1.4.3 Manually Adding IP Camera .............................................................................................. 12
1.5 Configuring Recorded Video Storage Schedule ..................................................................... 15
1.6 Configuring P2P Settings........................................................................................................... 17
1.6.1 Enabling P2P Function....................................................................................................... 17
1.6.2 Adding the NVR to Smart Phone Client ........................................................................... 18
1.7 Smart Motion Detection.............................................................................................................. 19
1.8 Live View...................................................................................................................................... 21
1.9 Recording Playback.................................................................................................................... 23
2 Logging in to Web............................................................................................................................... 25
Appendix 1 Cybersecurity Recommendations ................................................................................... 26

1
1 Local Operations
Slight difference might be found on the interfaces of different models. Following figures are for
reference only. The actual product shall prevail.
1.1 Starting the NVR
Before starting the NVR, make sure that:
●The rated input voltage matches the NVR's power requirements.
●The power wire connection is ready.
●For device security, connect the NVR to the power adapter first and then connect it to the
power socket.
●Always use stable current. It is recommended to use UPS as the power source.
1.2 Initializing the NVR
This topic shows how to initialize the NVR before use.
Background Information
When booting up for the first time, you need to configure the password information for admin
(by default). To guarantee device security, we strongly recommend you properly keep the login
password and regularly modify it.
Procedure
Step 1 Turn on the NVR.
The system enters device initialization interface.
Step 2 From the drop-down lists, select region, language and video standard as needed.

2
You can change these settings on setting pages of the NVR after initialization.
Figure 1-1 Set location, language and video standard
Step 3 Click Next.
Step 4 Read the Software License Agreement and select I have read and agree to all
terms, and then click Next.
Step 5 Select time zone and configure system time, and then click Next.
Figure 1-2 Configure time zone and system time
Step 6 Configure the password information for device administrator, and then click Next.

3
Figure 1-3 Configure password information
Table 1-1 Password information
Parameter
Description
Username
By default, the user is admin and you cannot change it.
Password
Enter a new password for device administrator in Password
field, and confirm the password in the next field.
The new password can be set from 8 characters to 32
characters and contains at least two types from numbers, letters
and special characters (excluding"'", """, ";", ":" and "&").
Confirm Password
Password Hint
Enter a prompt question that will help you recall the password for
your device.
On the login interface, click and the prompt will be displayed
to help you reset the password.
Step 7 (Optional) Use mouse to draw an unlock pattern, and then draw it again for
confirmation.

4
Figure 1-4 Draw an unlock pattern
●The pattern that you want to set must cross at least four points.
●If you do not want to configure the unlock pattern, click Skip.
●Once you have configured the unlock pattern, it will be used as the default
authentication method. If you skip this setting, enter the password for login.
Step 8 (Optional) Apply reserved email and security questions to the NVR.
●Enable Reserved Email and enter the email address.
●Enable Security Question and select questions from the drop-down lists for
Question 1, Question 2, and Question 3, and then enter the answers to those
questions.
Figure 1-5 Apply reserved email and security questions
Step 9 Click OK.
1.3 Configuring Network
You can configure the basic network settings such as net mode, IP version, and IP address for
the NVR.
Step 1 Select Main Menu > NETWORK > TCP/IP.
Step 2 Configure parameters.

5
You can also configure network parameters in the Startup Wizard.
Figure 1-6 TCP/IP
Table 1-2 TCP/IP parameters
Parameter
Description
IP Version
In the IP Version list, you can select IPv4 or IPv6. Both versions
are supported for access.
MAC Address
Displays the MAC address of the NVR.
DHCP
Enable the DHCP function. The IP address, subnet mask and
default gateway are not available for configuration once DHCP is
enabled.
●If DHCP is effective, the obtained information will be
displayed in the IP Address, Subnet Mask and Default
Gateway. If not, all values show 0.0.0.0.
●If PPPoE connection is successful, the IP address, subnet
mask, default gateway, and DHCP are not available for
configuration.
IP Address
Enter the IP address and configure the corresponding subnet
mask and default gateway.
IP address and default gateway must be in the same network
segment.
Subnet Mask
Default Gateway
Preferred DNS
Enter the IP address of DNS.
Alternate DNS
Enter the IP address of alternate DNS.