DaiMi MZ-1350 User manual

.1 X User Manual
.1 X PS4 back button attachment
Package included
Sleep current:Less than 30uA Working current:Less than 15mA
Electrical parameters
Power supply mode:EXT wired connection Working voltage:DC3.0-3.3V
Product electrical specifications
PS4 Controller Paddles
MZ-1350
Please read the manual carefully before use and use it in strict accordance with the requirements
of the manual. After reading,please keep it properly for future reference.

This product is a PS4 Controller Paddles handle extended button, you can customize the mapping
of the button function on the back, support the TURBO burst function, plug and play, and bring
users a different gaming experience.
Product size
Product introduction
It is composed of 14 digital keys (△,○,×,□,R3, L3, R2, L2, R1, L1, TURBO, SET).
Key composition
99.5mm/3.92n
57mm/2.25in
44mm/1.73in
1.Long press the SET button for 2 seconds, ×light flashes quickly.
2.Press the M1 or M2 (Press once to switch once ) ,lights flashing slowly in sequence
( Flаѕhіng Ѕеquеnсе: ×→○→△→□→ RЗ→LЗ→R2→L2→R1→L1 )
3.When the target button is flashing, press the SET button,finish setting.
Note: the handle should also have programming and memory programming functions when it
is not connected to Bluetooth state and charging state.
Clear Cache : Long press the SET button for 5 seconds, the LED changes from blinking to off.
Memory Function: Insert the handle again and still retain the last programming function.
The factory default has no definition.
Turbo function : Press the M1/2 and Turbo at the same time, the function key has Turbo
continuous launch function .Repeat this step to cancel.
Function Setting