Danby DKC054A1BSLDB User manual

DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9
DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840
OWNER’S MANUAL
MANUEL DU PROPRIÉTAIRE
MANUAL DEL PROPIETARIO
www.Danby.com
MODEL • MODÈLE • MODELO
DKC054A1BSLDB
KEG COOLER
Owner’s Manual.............................1 - 14
GLACIÈRE DE BIÈRE PRESSION
Manuel du propriétaire.................15 - 28
BARRIL REFRIGERADOR
Manual del propietario.................29 - 42
2018.05.22

1
2
3
4
1. Pressure gauge dial
2. Pressure relief ring
3. Open / Close valve
4. Tank strap
Ensure the CO2tank is empty before courier or 3rd party transport.
DANGER - A full or partially full CO2tank is under extreme pressure. Uncontrolled
release of pressure is extremely dangerous. The instructions below use the regulator to
control the release of this pressure in a safe manner. Do not bypass the regulator.
1. Ensure tank is secure
2. Fully open valve by turning counter-clockwise. Pressure gauge dial will show a
value if tank contains pressure.
3. Gently pull pressure relief ring. Released gas should be heard.
4. The pressure dial will read zero when the tank is empty. Continue to hold pressure
relief open until tank is empty.
5. Release the pressure relief ring.
6. Fully close valve by turning clock-wise.
1

Welcome
Welcome to the Danby family. We are proud of our quality products and we believe in
dependable service. We suggest that you read this owner’s manual before plugging in your new
appliance as it contains important operation information, safety information, troubleshooting and
maintenance tips to ensure the reliability and longevity of your appliance.
Visit www.Danby.com to access self service tools, FAQs and much more. For additional assistance
call 1-800-263-2629.
Note the information below; you will need this information to obtain service under warranty.
You must provide the original purchase receipt to validate your warranty and receive service.
Model Number: _________________________________________________
Serial Number: _________________________________________________
Date of Purchase: _______________________________________________
Need Help?
Before you call for service, here are a few things you can do to help us serve you better.
Read this owner’s manual:
It contains instructions to help you use and maintain your appliance properly.
If you receive a damaged appliance:
Immediately contact the retailer or builder that sold you the appliance.
Save time and money:
Check the troubleshooting section at the end of this manual before calling. This section
will help you solve common problems that may occur.
1-800-26- Danby
(1-800-263-2629)
2

3
SAFETY REQUIREMENTS
DANGER: Risk of fire or explosion. Flammable
refrigerant used. Do not puncture refrigerant tubing.
• Do not use mechanical devices to defrost
refrigerator.
• Ensure that servicing is done by factory
authorized service personnel, to minimize
product damage or safety issues.
• Consult repair manual or owner’s guide before
attempting to service this product. All safety
precautions must be followed.
• Dispose of properly in accordance with federal
or local regulations.
• Follow handling instructions carefully.
WARNING: Keep ventilation openings, in the
appliance enclosure or in the built-in structure, clear
of obstruction.
WARNING: Do not use mechanical devices or other
means to accelerate the defrosting process, other
than those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside
the food storage compartments of the appliance,
unless they are of the type recommended by the
manufacturer.
CAUTION: Children should be supervised to ensure
that they do not play with the appliance.
DANGER: Risk of child entrapment. Before throwing
away an old appliance:
• Remove the door or lid.
• Leave shelves in place so that children may not
easily climb inside.
This appliance is intended to be used in household
and similar applications such as:
• Staff kitchen areas in shops, offices and other
working environments;
• Farm houses and by clients in hotels, motels and
other residential type environments;
• Bed and breakfast type environments;
• Catering and similar non-retail applications.
SAFETY REQUIREMENTS
This appliance is not intended for use by persons
(including children) whose physical, sensory or
mental capabilities may be different or reduced,
or who lack experience or knowledge, unless such
persons receive supervision or training to operate
the appliance by a person responsible for their
safety.
Do not store explosive substances such as aerosol
cans with a flammable propellant in this appliance.
GROUNDING INSTRUCTIONS
This appliance must be grounded. Grounding
reduces the risk of electrical shock by providing an
escape wire for the electrical current.
This appliance has a cord that has a grounding
wire with a 3-prong plug. The power cord must be
plugged into an outlet that is properly grounded.
If the outlet is a 2-prong wall outlet, it must be
replaced with a properly grounded 3-prong wall
outlet. The serial rating plate indicates the voltage
and frequency the appliance is designed for.
WARNING - Improper use of the grounding
plug can result in a risk of electric shock.
Consult a qualified electrician or service agent
if the grounding instructions are not completely
understood, or if doubt exists as to whether the
appliance is properly grounded.
Do not connect your appliance to extension
cords or together with another appliance in the
same wall outlet. Do not splice the power cord.
Do not under any circumstances cut or remove the
third ground prong from the power cord. Do not
use extension cords or ungrounded (two prongs)
adapters.
If the power supply cord is damaged, it must be
replaced by the manufacturer, its service agent or
similar qualified person in order to avoid hazard.
Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS!

WARNING: CO2CAN BE DANGEROUS!
CO2Cylinders, when charged, contain high
pressure compressed gas which can be hazardous
if not handled properly. Read and understand the
following procedures for CO2cylinders before
installation:
1. Always check the D.O.T. (Department of
Transportation) as well as the T.C. (Transport
Canada) test date located on the neck of the
cylinder before installation. If the date is older
than five (5) years, do not use! Return the gas
cylinder to a gas supplier for re-certification
(service charges may be applicable).
2. Always connect a CO2gas cylinder to a
regulator. Failure to do so could result in an
explosion which can possibly result in death or
injury when the cylinder valve is opened.
3. Always follow correct procedures when cylinders
are changed as per local codes.
4. Always secure a CO2 gas cylinder in an
“upright” position.
5. Always keep a CO2gas cylinder away from
heat. Store extra cylinders in a cool place
(preferably 70°F/21°C). Securely fasten with a
chain in an upright position when storing.
6. Always ventilate and leave the area immediately
after any leakage of CO2.
7. Never connect a CO2gas cylinder directly to a
beer keg.
8. Never drop or throw a CO2cylinder.
9. Never connect a keg without at least one
safety pressure release. There are two safety
mechanisms in the pressure system;
• One at or on the CO2regulator.
• One at or on the product container coupler
in the pressure gas line.
Note: The regulator and keg coupler supplied
with this appliance are inclusive of such safety
mechanisms.
Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS!
WARNING: CO2CAN BE DANGEROUS!
If it becomes difficult to breathe and/or your head
starts to ache, abnormal concentrations of carbon
dioxide (CO2) may be present in the area.
CLOSE THE MAIN VALVE ON THE CO2CYLINDER,
VENTILATE AND LEAVE THE ROOM IMMEDIATELY!
Beer is easily available with Danby’s Keg Cooler,
however, it is not intended to be available to people
under the legal age to consume beer. Danby
does not assume liability for the unlawful use or
consumption of the beer.
PLEASE DRINK RESPONSIBLY AND PLEASE DON’T
DRINK AND DRIVE!
WARNING
CO2GAS CAN BE DANGEROUS
CO2cylinders contain high-pressure compressed
gas which can be hazardous if not handled
properly. Make sure to read and understand
all safety procedures for CO2cylinders before
installation.
4