Danby Premiere DDR30A2GP Assembly instructions

Danby. Owner’s Use and Care Guide
rey Y iere > Guide d'utiliser et soins de Propriétaire
Model + Modèle
DDR30A2GP, DDR45A2GP
CAUTION: PRÉCAUTION:
Read and follow all Veuillez lire attentivement
safety rules and operating les consignes de sécurité et
instructions before first les directives d’utilisation
use of this product. avant l’utilisation initiale
de ce produit.
PORTABLE DEHUMIDIFIER
Owner’s Use and Care Guide ee ccccccccccccccccccccncccccocccccocsccoce 1-10
+ Welcome
+ Important Safety Information
+ Installation Instructions
+ Features
+ Operating Instructions
+ Care and Maintenance
+ Troubleshooting
+ Warranty
DESHUMIDIFICATEUR PORTATIF
Guide d’utilisation et soins de Propriètaire ............................... 11-20
+ Bienvenue
+ Consignes de Sécurité Importante
+ Consignes d’installation
+ Caractéristiques
+ Consignes de Fonctionnement
+ Soins et Entretien
+ Dépannage
+ Garantie
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE: If the Dehumidifier changes
ownership, be sure this manual accompanies the unit.
CONSERVER CES INSTRUCTIONS POUR CONSULTATION ULTÉRIEURE: En cas de revente du
déshumidificateur, ce manuel doit être inclus avec l’appareil.
Danby Products Limited, Guelph, Ontario, Canada N1H 6Z9
Danby Products Inc. Findlay, Ohio, U.S.A.45840
V1.11.12DM

WELCOME
Thank you for choosing a Danby appliance to provide you and your family with all of the “Home Comfort”
requirements of your home, cottage, or office. This Owner’s Use and Care Guide will provide you with
valuable information neccssary for the proper care and maintenance of your new appliance. If properly
maintained, your Danby appliance will give you many years of trouble free operation. Please take a few
moments to read the instructions thoroughly and familiarize yourself with all of the operational aspects of this
appliance.
This unit can be conveniently moved from room to room within your home and set up in just minutes.
For easy reference, may we suggest you attach a copy of your sales slip/receipt to this page, along with the
following information, located on the rear wall of the water tank compartment.
Model Number:
Serial Number: ___
Date of Purchase:
This information will be necessary if your unit requires servicing and/or for general inquiries.
To contact a Customer Service Representative, call Danby TOLL FREE:
1-800-26- Danby’
(1-800-263-2629)
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
FNcaurIoN: Do not leave this unit unattended or operate in an area where people or animals may
not be able to react quickly. A failed unit may cause over-heating, resulting in personal injury or
property damage.

IMPORTANT SAFETY INFORMATION
NOTE
The WARNING instructions issued in this manual are not meant to cover all possible conditions and situations
that may occur. It must be understood that common sense, caution, and carefulness are factors that cannot be
built into all appliances. These factors must be supplied by the person(s) installing, maintaining, or operating
the appliance. Failure to install, maintain, and/or operate the equipment according to the manufacturer’s
instructions may result in conditions which can produce bodily injury and/or property damage. Contact your
dealer, service agent, or the manufacturer about any problems or conditions you do not fully understand.
For Danby Customer Service call 1-800-26-Danby” (1-800-263-2629)
ELECTRICAL … To reduce the risk of fire, elecrric shock, or personal injury, all wiring and grounding
REQUIREMENTS must conform with the latest edition of Local and National Electrical codes.
* It is the customer’s responsibility to have the wiring and fuses checked by a qualified electrician to make
sure adequate electrical power is available.
+ This appliance is designed to operate on a separate branch, polarized, three-wire, effectively grounded 120
Volt 60 Hertz (alternating current) circuit protected by a 15 ampere fuse, equivalent fuse or circuit breaker.
The three-prong grounding plug on the power cord should be plugged directly into a polarized, three slot,
effectively grounded receptacle rated 110/120 V.A.C.
FOR YOUR SAFETY: To reduce the risk of fire or explosion, do not store or use gasoline or other
flammable vapors or liquids in the vicinity of this or any other appliance.
Improper connection of the equipment-grounding conductor can result in a risk of
ADI RCE electrical shock. Check with a qualified electrician or serviceman if you are in doubt as
to whether your appliance outlets are properly grounded.
+ This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electrical shock by providing a path of least resistance for electrical current. This appliance is equipped with
a cord having an equipment-grounding conductor and 3 prong grounding lug. The plug must be connected
into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.
+ Do not modify the plug provided with this appliance. If it will not fit the outlet, have a proper outlet installed
by a qualified electrician.
+ If the household electrical supply does not meet the above specifications, or it you are not sure your home
has an effective ground, have a qualified electrician or your local electrical utility company check it and
correct any problems.
SAVE THESE INSTRUCTIONS!

INSTALLATION INSTRUCTIONS
LOCATION
* Select a suitable location, making sure you have easy access to an electrical outlet (avoid the use of
extension cords). If it is absolutely necessary to use an extension cord, use an approved “air conditioner”
heavy duty extension cord ONLY (available at most local hardware stores).
+ Make sure there are no obstructions restrictiog airflow through the front air intake grill. Maintain a minimum
clearance of at least 20 cm (8”) between adjacent walls and the back of the unit, to allow for proper air
circulation and maximum efficiency. To obtain maximum operating efficiency om your dehumidifier, the
recommended (room ambient) operating temperatures should be between 6°C (42.8°F)- 35°C (95°F).
+ It is important to remember the efficiency of a dehumidifier will be effected/influenced by the rate at which
new humid air (moisture) is allowed to infiltrate the same space/area. To maintain efficiency, the dehumidifier
must be operated in an enclosed area. Keep all doors and windows closed.
FEATURES
+ Soft touch (Electronic) Control Key Pads + Full Bucket Indicator Light
+ Auto-Sensing Humidity Control + Easy Roll Castors (4)
+ Adjustable Humidity Settings (30% - 90%) + Front Mounted Water Tank (Removable)
+ 2 Fan Speed Settings (High / Low) + Direct Drain Option
* Delay Start Protection (Compressor) * Quiet Operation
+ Auto-Defrost (De-Icer) + Removable Air Filter
Control Panel Handle
Dry
AI
Vent
Continuous
Drain Outlet

CASTER INSTALLATION
Caster installation is recommended to avoid damage to floors.
1.Remove the casters from the bucket ofthe dehumidifier.
2. Position the dehumidifier onits side.
3. Locate the arrow on the bottom of the dehumidifier and insert
the caster according to the arrow direction.
4. Slide the caster in as far as it will go. The caster will snap
into place.
5. Repeat steps 1 to 4 for the other 3 casters.
OPERATING INSTRUCTIONS
Loe or
A O O
O
1) POWER Button: On / Off
2) FAN SPEED Button: High / Low
3) TIMER Button: When unit is operating, press
TIMER to set number of hours desired until unit will
shut off.When unit is in stand-by, press TIMER to set
number of hours desired until unit will turn on.
Setting timer from 1-24 hours. To cancel the timer,
proceed as above but set the “timer off” to zero (0)
hours.
4) °C/°F Button: Press the °C/°F button to toggle
between Celsius and Fahrenheit.
5) SET HUMIDITY/CURRENT HUMIDITY
DISPLAY: When machine is running, it displays the
| i
4
current humidity. Press UP or DOWN buttons to
select humidity setting. The humidity is adjusted in
increments of 5% b; cach press. Adjustable range is
within 30% RH to 90% RH. 10 seconds after
setting humidity, the display will change back to the
current humidity.
CURRENT TEMP/ TIMER SET DISPLAY:
en machine is running, it displays the current
temperature. Press the R button to set the
machine to shut off automatically after specified
amount of time. 10 seconds after displaying the timer,
the display will change back to current tempetauture.
7) DEFROST LIGHT: When temperature is low,
unit enters defrost mode and defrost light illuminates.
8) BUCKET FULL LIGHT: When water tank is
full, bucket full light illuminates.
€

OPERATING INSTRUCTIONS (cont’d)
START OPERATION Fig. 1
1) Place the product in an upright on its rating label.
position on a flat, stable, and heat- :
resistant surface. Make sure there is 3) Make sure the water tank is correctly
nothing flammable or heat sensitive located. After switching on the machine
within 100cm (39 inches). Operating for the first time, if the “Bucket Full”
the product in any other position could light illuminates, pull out the water
cause a hazard. wok and cne iar the “float” kevat is
2) Insert the plug into a suitable wall Able to move Hresly, When return the
socket, The dehumidifier is suitable for gaer fank to the correct position
operating on an electricity supply 1g. D.
having the same voltage as that showm
WATER FULL When the water tank is full and/or incorrectly positioned inside the cabinet, the water
INDICATOR full red light turns on and remains on until such time that the tank is emptied and/or
LIGHT (RED) correctly re-positioned.
This condition will result in the immediate shut down of the dehumidifying system (both compressor and fan
motor operations are terminated). This is a safety feature. When the water tank is emptied and/or correctly
re-positioned, the dehumidifier will resume operation automatically.
NOTE: It may take several minutes before operating conditions resume.
BUCKET Fig. 2| j
FULL LIGHT {
+ When the water tank is full the machine will stop and the“ Bucket Full” light will
illuminate.
+ The water tank should be carefully removed from the machine by sliding it outward
from the front of the unit, and it should be emptied. When the empty tank is replaced
properly in the machine, the unit will start up and run normally (Fig. 2).
NOTE: Please use both hands to carefully empty the water tank.
DEF. FATOR E Each time the unit is disconnected/re-connected and/or in the event of a power failure,
the electronic circuitboard automatically defaults to the following factory setting:
Humidity Setting: 60%
Fan Speed: Low
NOTE: In the event of a power failure, the unit will default to the last program setting that was used
when power is restored.
WATER TANK © Proper installation of the water tank is crucial in maintaining reliable dehumidifier
OPERATION operation. The water tank holds accumulated condensed water and, by means of a safety
switch, controls both the water level and operation of the dehumidification process.
When the water tank is full and/or accidentally displaced inside the cabinet, the float switch actuator (aide
the tank) breaks contact with the safety switch. This condition results in the immediate shut down of the
compressor and fan motor system, preventing moisture from being condensed.
NOTE: Never tamper with or attempt to defeat the water level (safety) float switch system.
€

OPERATING INSTRUCTIONS (cont’d)
DEFROST
When the machine is operated at low temperatures (less than 18°C) (64.4°F), the surface of the ev:
accumulate a layer of
room temperature remains below 5°C 41°F)
DEHUMIDIFYING
Dehumidifying is a means of removing moisture from
the air. A dehumidifier will help to protect your home
and valued possessions from damage (swelling)
caused by moisture in the air. Essentially a
dehumidifier removes moisture from the air as the
moist air passes over a dehumidifying (evaporator)
coil. Moisture is condensed on the evaporator coil.
drained, and collected inside an internal (removable)
water tank located at the front of the unit. The
exhausted air being returned into the room
environment is elevated several degrees, causing the
orator may al
st which would reduce the efficiency of the machine. When this konpent the machine
will go into periodic defrost mode. The machine will o i FCH
to defrost may vary. If the machine freezes up, it should be turned off a
e machine should be switchi
rate in temperatures down to F).The time taken
at oponer supply and re-started. If the
off.
relative humidity of the surrounding air.
DEHUMIDIFYING MODE SELECTION:
1) To turn the unit on, press the ON / OFF button.
2) Press the humidity or buttons to select a desired
RH operating value (30%-90%).
FAN SPEED SELECTION: Select a fan speed on
the keypad. The speed you select is identified by the
(illuminated) indicator light located directly above the
selection made,
surrounding air temperature to increase (slightly).
This process also contributes to lowering the
AIR FILTER
Your dehumidifier features a removable Air Filter. This filter is located at the
front of the unit (behind the air intake grill) directly above the water tank
compartment. The air filter plays an important role in helping to reduce
(minimize) dust/dirt particles from the surrounding environment. A blocked /
clogged air filter reduces air intake, impa Une ERA el on operatin;
efficiency. To maintain maximum operating efficiency, the filter must be checked
and cleaned regularly (every 2 weeks). More frequent cleaning may be required
depending upon indoor air quality.
IMPORTANT: Never operate the unit without the air filter in place.
AIR FILTER CLEANING STEPS:
1) Pull the air filter out gently (Fig. 3).
2) Clean the filter with a vacuum cleaner, or wash it with clean water and
dry with a dry cloth.
3) Put the clean air filter back in place and continue to operate the
dehumidifier.

OPERATING INSTRUCTIONS (cont’d)
When using the continuous drain function, the PVC hose must be placed horizontal
SE ees 5 below the drainage hole. Avoid uneven ground and folding the hose. NOTE: Shoul
you damage or misplace the pvc drain hose, a standard garden hose can be used.
2?
CONTINUOUS
DRAIN The function of continuous drain can be performed using the following steps:
1) To save having to periodically empty the water tank, this unit can
be configured for continuous drain. You can use the supplied drain
hose to connect to the continuous drain connector.
Z Unscrew and remove the drain cover at the rear of the unit (Fig.
3) Remove the soft rubber stopper, and place it in the water tank for
safe keeping (Fig. B).
4) Insert the drain hose through the hole of the drain cover (Fig. C).
5) Ensure the rubber seal ring is properly seated in the end of the
hose as shown in Fig. C.
6) Connect the drain hose to the drain port (Fig. D).
7) Tighten the drain cover in clockwise direction onto the rear of
the unit (Fig. D).
8) Place the bucket in its original location (Fig. E).
Io
Drain
hose
Backofthe
unit
[Fig.
A
S
Drain
cover
Fig.
B
Soft
rubber
@
wy
stopper
_— Drain cover
Drain cover x |
Drain hose — @
Fig. C
Fig. D
Drain cover
LS
Drain hose
Drain hose Fig. E
> + [ [H Bucket

CAUTIONS
1) DO NOT pull on the power cord to avoid breakage, potential danger,
or injury.
2) DO NOT use insect/oil/paint spray around the machine; these products
might cause damage to plastic parts or start a fire.
3) DO NOT place the unit on uneven ground to avoid shaking, noise, and
water leakage.
4) Always keep the unit 20cm or more from the wall to dissipate heat properly.
5) DO NOT drop anything into the machine.
6) Close all windows to allow for the masimum possible efficiency or
removal of moisture
7) Keep the machine away from any type of heat source,
8) When moving or putting in storage, do not place the dehumidifier on its
side, or upside down, to avoid shaking.

CARE AND MAINTENANCE
CLEANING UN caution : Before attempting to clean and/or service this unit, always disconnect the
power supply cord from the electrical supply outlet.
1) DO NOT use gasoline, benezene, paint thinner, or any other chemicals to clean this unit, as these
substances will damage/deform both plastic components and luster finish.
2) Never attempt to clean the unit by pouring water directly over any of the surface areas, as this will cause
deterioration of electrical components and wiring insulation.
3) Use only a mild dish washing detergent, lukewarm water, and a soft cloth to wipe the exterior surface of the
unit and dry thoroughly.
STORAGE When the dehumidifer is not being used for long time periods, please follow these instructions:
1) Disconnect the power cord from the power supply.
2) Empty the water tank and wipe (clean) thoroughly.
3) Clean air filter thoroughly.
4) Re-package the unit in the original carton.
5) Store the unit upright in a dry location.
TROUBLESHOOTING
Occasionally, you may encounter some problems that are of a minor nature and a service call may not be
necessary. Use this troubleshooting guide to identify possible problems you may be experiencing. If the unit
continues to operate improperly, call your local Danby Service Depot or
1-800-26-Danby" (1-800-263-2629)
PROBLEM POSSIBLE CAUSE
1) Unit will not operate. + Check power cord connection.
+ Check electrical outlet for blown fuse.
+ Check if water tank is full (if yes, empty).
+ Check water tank is properly installed.
2) Dehumidifying capacity + Air filter is dirty and/or blocked.
(moisture removal) low. + Ambient (room) temperature too low (below 5°C/41°F).
+ Poor air flow circulation/obstruction of front grill.
+ Relative humidity in surrounding environment very low.
3) Relative Humidity setting not |° Check all doors and windows are closed.
reached after long period o + Area/room is too large for the capacity of the
operation. dehumidifier.