DANE-ELEC SO MOBILE SUPERSPEED PORTABLE USB 3.0 User manual

Quick Start Guide
So Mobile SuperSpeed PORTABLE USB 3.0 HARD DRIVE

So Mobile SuperSpeed PORTABLE USB 3.0 HARD DRIVE
warranty:
Warranty and customer support information available at danedigital.com. These specifications and characteristics are supplied for your in-
formation: Dane-Elec reserves the right to modify this information without prior notice. The guarantee does not cover loss of data. (*): 1 GB =
approx. 1 billion bytes. 1 MB = approx. 1 million bytes. Due to formatting, accessible capacity will be slightly less.

So Mobile SuperSpeed PORTABLE USB 3.0 HARD DRIVE
technical specications:
Connection USB 3.0 (backward compatible to USB 2.0)
Hard Disk* 1 SATA
Format NTFS or FAT32
PC Compatible Microsoft® Windows® XP/Vista/Windows 7
Conguration
Requirements
Microsoft® Internet Explorer 5.0 or higher (or
other) with internet connection for software
updates.
Dimensions 120mm(L) x 77mm(W) x 19mm(H)
Weight .35 lbs. /.16 kg
Warranty 2 year limited warranty
*1 GB = approx. 1 billion bytes. 1 MB = approx. 1 million bytes.
Due to formatting, accessible capacity will be slightly less.

package contents:
External Hard Drive
Quick Start Guide
Quick Start Guide
So MOBILE SuperSpeed PORTABLE USB 3.0 HARD DRIVE
USB 3.0 Cable
Notice to Users:
The use of the software contained on this external hard drive is subject to the license
agreement displayed at the time of installation.
Backup Software

So Mobile SuperSpeed PORTABLE USB 3.0 HARD DRIVE
Turn On
Turn on your computer and wait for
start-up to complete.
Install
Follow any on-screen instructions to complete the
hardware installation of your new hard disk drive.
Note: This USB 3.0 device can be plugged into a
USB 2.0 host provided you use the USB 3.0 Cable
supplied, however, the USB 3.0 device will only
obtain USB 2.0 speed while connected to a USB
2.0 host. Once USB 3.0 device is plugged back
into a USB 3.0 host your speeds will return to
SuperSpeed USB ranges. (Remember perfor-
mance may vary based on operating system or
environment)
1
3
Connect
• Connect the USB connector to the
So Mobile SuperSpeed hard disk drive and
your computer.
2
B
B
USB connections:

So Mobile SuperSpeed PORTABLE USB 3.0 HARD DRIVE
Disconnect your Portable HDD
Windows:
1. From your desktop, click on the green arrow inside
the system tray.
2. Click on the “Safely remove USB Mass Storage
Device” option.
3. When the “Safe to Remove Hardware” information
appears on your desktop, your drive can be safely
removed from the system.
Important
Do not remove the So Mobile SuperSpeed hard
drive while the Status LED is Flashing or you may
lose and/or corrupt your valuable data.
how to disconnect:
Do not drop! Operating temperature Keep magnets away!
40