DANE-ELEC SO READY SUPER SPEED User manual

Quick Start Guide
So Ready SuperSpeed EXTERNAL USB 3.0 DESKTOP HARD DRIVE

So Ready SuperSpeed EXTERNAL USB 3.0 DESKTOP HARD DRIVE
warranty:
Warranty and customer support information available at danedigital.com. These specifications and characteristics are supplied for your in-
formation: Dane-Elec reserves the right to modify this information without prior notice. The guarantee does not cover loss of data. (*): 1 GB =
approx. 1 billion bytes. 1 MB = approx. 1 million bytes. Due to formatting, accessible capacity will be slightly less.

So Ready SuperSpeed EXTERNAL USB 3.0 DESKTOP HARD DRIVE
technical specications:
Connection USB 3.0 (backward compatible to USB 2.0)
Hard Disk* 1 SATA
Format NTFS or FAT32
PC Compatible Microsoft® Windows® XP/Vista/Windows 7
Conguration
Requirements
Microsoft® Internet Explorer 5.0 or higher (or
other) with internet connection for software
updates.
Dimensions 182mm(L) x 121mm(W) x 39mm(H)
Weight 1.80779 lbs | 820g
Warranty 2 year limited warranty
*1 GB = approx. 1 billion bytes. 1 MB = approx. 1 million bytes.
Due to formatting, accessible capacity will be slightly less.

package contents:
External Hard Drive
Quick Start Guide
Quick Start Guide
So Ready SuperSpeed EXTERNAL USB 3.0 DESKTOP HARD DRIVE
Universal wall A/C adapter
includes US, EU and UK adapter clips
USB 3.0 Cable
Backup Software
Notice to Users:
The use of the software contained on this external hard drive is subject to the license
agreement displayed at the time of installation.

So Ready SuperSpeed EXTERNAL USB 3.0 DESKTOP HARD DRIVE
USB connections:
Turn On
Turn on your computer and wait for
start-up to complete.
Install
Follow any on-screen instructions to complete the
hardware installation of your new hard disk drive.
Note: This USB 3.0 device can be plugged into a
USB 2.0 host provided you use the USB 3.0 Cable
supplied, however, the USB 3.0 device will only
obtain USB 2.0 speed while connected to a USB
2.0 host. Once USB 3.0 device is plugged back
into a USB 3.0 host your speeds will return to
SuperSpeed USB ranges. (Remember perfor-
mance may vary based on operating system or
environment)
1
3
Connect
• Connect the USB connector to the
So Ready SuperSpeed hard disk drive and
your computer.
• Connect the A/C power adapter to wall outlet
and your So Ready hard disk drive.
2

So Ready SuperSpeed EXTERNAL USB 3.0 DESKTOP HARD DRIVE
Disconnect your Desktop HDD
Windows:
1. From your desktop, click on the green arrow inside
the system tray.
2. Click on the “Safely remove USB Mass Storage
Device” option.
3. When the “Safe to Remove Hardware” information
appears on your desktop, your drive can be safely
removed from the system.
Important
Do not remove the So Ready SuperSpeed hard
drive while the Status LED is Flashing or you may
lose and/or corrupt your valuable data.
how to disconnect:
Do not drop! Operating temperature Keep magnets away!
40