Danfoss PLUS+1 DP570 Series Manual

Technical Information
PLUS+1® Mobile Machine Displays
DP570 Series
powersolutions.danfoss.com

Revision history Table of revisions
Date Changed Rev
January 2017 Added topic: High range input impedance for analog inputs 0701
November 2016 Minor update 0604
March 2016 Corrected literature number 0603
March 2016 Updated to Engineering Tomorrow design 0602
February 2016 DP570 overview text changes; Linux® operating system text changes 0601
July 2015 Vault memory, removed reference to USB port (DP570 does not have one) FB
March 2015 Various FA
February 2015 Converted to Danfoss layout; Ingress Protection (IP) rating updated; new drawing with
updated bracket and seal for flush mounted option
EA
December 2013 Model feature DA
November 2013 Screw lengths and torque CA
November 2013 Operating temperature BA
November 2013 First edition AA
Technical Information
DP570 Series Displays
2 | ©Danfoss | January 2017 L1328765 | BC00000231en-US0701

Literature references DP570 reference literature............................................................................................................................................................4
User liability and safety statements
OEM responsibility...........................................................................................................................................................................5
Overview DP570 Series Displays.....................................................................................................................................................................6
PLUS+1®GUIDE............................................................................................................................................................................ 6
Linux®operating system...........................................................................................................................................................6
Ordering information Product naming convention........................................................................................................................................................ 7
Related products...............................................................................................................................................................................8
Inputs/outputs Inputs....................................................................................................................................................................................................9
Digital/Analog/CAN....................................................................................................................................................................9
Digital/Analog/4-20mA.............................................................................................................................................................9
High range input impedance for analog inputs...................................................................................................... 11
Multifunction..............................................................................................................................................................................12
Encoder........................................................................................................................................................................................ 14
Video............................................................................................................................................................................................. 14
Outputs..............................................................................................................................................................................................14
Video power output................................................................................................................................................................ 14
Controller Area Network (CAN) specifications
CAN shield/analog inputs...........................................................................................................................................................15
CAN communication.....................................................................................................................................................................15
Memory NV memory...................................................................................................................................................................................... 16
FRAM Memory........................................................................................................................................................................... 16
Vault Memory.............................................................................................................................................................................16
Product ratings Electrical............................................................................................................................................................................................ 17
Environmental.................................................................................................................................................................................17
Testing criteria.................................................................................................................................................................................17
Maintenance guidelines LCD module .................................................................................................................................................................................... 19
Installation Dimensions.......................................................................................................................................................................................20
Two mounting options................................................................................................................................................................21
Flush mounted.......................................................................................................................................................................... 21
Stand-alone on post................................................................................................................................................................ 21
Pin assignments..............................................................................................................................................................................22
Machine wiring guidelines......................................................................................................................................................... 23
Machine welding guidelines......................................................................................................................................................23
Technical Information
DP570 Series Displays
Contents
©Danfoss | January 2017 L1328765 | BC00000231en-US0701 | 3

DP570 reference literature
Literature title Literature type Literature number
DP570 Series PLUS+1®Mobile Machine Displays Technical Information L1328765
DP570 Series PLUS+1®Mobile Machine Displays Data Sheet L1317788
PLUS+1®GUIDE Software User Manual Operation Manual 10100824
Technical Information (TI)
A TI is comprehensive information for engineering and service personnel to reference.
Data Sheet (DS)
A DS is summarized information and parameters that are unique to a specific model.
API Specifications (API)
An API is specifications for programming variable settings.
API specifications are the definitive source of information regarding pin characteristics.
PLUS+1®GUIDE User Manual
This user operation manual (OM) details information regarding the PLUS+1®GUIDE tool set that is used to
build PLUS+1®applications. This OM covers the following broad topics:
•How to use the GUIDE graphical application development tool to create machine applications
•How to configure module input and output parameters
•How to configure module input and output parameters
•How to download GUIDE applications to target PLUS+1®hardware modules
•How to upload and download tuning parameters
•How to use the PLUS+1®Service Tool
Latest version of technical literature
Danfoss product literature is online at: http://powersolutions.danfoss.com/literature/
Technical Information
DP570 Series Displays
Literature references
4 | ©Danfoss | January 2017 L1328765 | BC00000231en-US0701

OEM responsibility
The OEM of a machine or vehicle in which Danfoss products are installed has the full responsibility for all
consequences that might occur. Danfoss has no responsibility for any consequences, direct or indirect,
caused by failures or malfunctions.
•Danfoss has no responsibility for any accidents caused by incorrectly mounted or maintained
equipment.
•Danfoss does not assume any responsibility for Danfoss products being incorrectly applied or the
system being programmed in a manner that jeopardizes safety.
•All safety critical systems shall include an emergency stop to switch off the main supply voltage for
the outputs of the electronic control system. All safety critical components shall be installed in such a
way that the main supply voltage can be switched off at any time. The emergency stop must be easily
accessible to the operator.
Technical Information
DP570 Series Displays
User liability and safety statements
©Danfoss | January 2017 L1328765 | BC00000231en-US0701 | 5

PLUS+1®Mobile Machine Displays are designed to provide flexible, expandable, powerful and cost
effective total machine management system displays for a wide variety of vehicle applications.
DP570 Series Displays
DP570 Series Displays are designed to perform in the most extreme mobile machine environments. The
latest technology with backlight provides outstanding brightness and contrast performance resulting in
an easy-to-read screen. Develop your own software and layout using the PLUS+1®GUIDE (Graphical User
Integrated Development Environment) and the GUIDE Vector Based Screen Editor (VBSE). A basic graphic
library is available.
PLUS+1®GUIDE
PLUS+1®GUIDE (Graphical User Integrated Development Environment) is a complete toolbox that
generates downloadable applications for all programmable PLUS+1®Compliant products.
A screen editor allows easy development of applications by programmers without formal software
development training. The expertise from a software engineer is not needed to find your way around in
PLUS+1®GUIDE
Linux®operating system
DP570 Series Displays contain embedded Linux®operating system software that is copyrighted software
licensed under the GPL Version 2.0 or LGPL Version 2.1.
Linux®operating system software is free software; you can redistribute it and/or modify it under the terms
of the GNU General Public License as published by the Free Software Foundation; Licenses full notice
available:
GPL Version 2.0 http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
LGPL Version 2.1 http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
As an installer of Linux®operating system you will have your own obligations under the licensing
agreements, which may include among other things the obligation to include a copy of these licenses or
to include an offer of a physical copy of the source code for such software with your distributions of the
equipment. You should carefully review the licenses to determine what your obligations and options may
be for your intended use.
Anyone in receipt of this program may obtain the complete corresponding source code from Danfoss for
a period of three years after the last shipment of this product and/or spare parts by going on line at
http://www.danfoss.com or include “source code for DP570” in your written request to:
PLUS+1®Helpdesk Danfoss (US) Company, 3500 Annapolis Lane North Plymouth, MN 55447 USA
Technical Information
DP570 Series Displays
Overview
6 | ©Danfoss | January 2017 L1328765 | BC00000231en-US0701

Product naming convention
DP570 model code
A DCB E F G
P200166
D P 5 7 0
This is not a variant configurator.
Product configuration model code
A B C D E F G Part number
DP570 01 00 00 00 00 01 11134525
DP570 01 00 00 00 01 01 11130432
DP570 01 00 00 00 00 00 11140997
DP570 01 00 00 00 01 00 11140996
A—Model name
Code Description
DP570 PLUS+1®Mobile Machine Displays
B—Input/output options
Code Description
01 User configurable: 1 CAN, 2 DIN/AIN, 2 DIN/AIN/4-20 mA, 2 Multi-function, 1 DOUT or 2
CAN, 2 DIN/AIN/4-20 mA, 2 Multi-function, 1 DOUT
C—Real time clock
Code Description
00 RTC
D—Flash memory/application key
Code Description
00 512 MB/without application key
E—Application log (vault memory)
Code Description
00 16 MB
F—Video input options
Code Description
00 None
01 One video input
Technical Information
DP570 Series Displays
Ordering information
©Danfoss | January 2017 L1328765 | BC00000231en-US0701 | 7

G—Mounting options
Code Description
00 Post mounting
01 Panel mounting
Related products
Mating connector kit contents
Description Part numbers
M12 5 pin male connector 11130712
DEUTSCH terminal 10100743
16 to 22 AWG crimp tool 10100744
20 AWG crimp tool 10100745
12 pin DEUTSCH WM 125 locking plug 10100741
DEUTSCH DTM06-12SA 12 pin connector kit (16 to 22
AWG) 10102025
DEUTSCH DTM06-12SA 12 pin connector kit (20 AWG) 10100944
Connection-kit DP570 with camera cable 11145163
Accessories
Description Part numbers
Panel mounting kit 11140430
PLUS+1®GUIDE Professional Software
(Includes 1 year of software updates, a single user license,
Service and Diagnostic Tool and Screen Editor)
11179523
(annual renewal with 11179524 to keep the software
updates)
Post mounting kit 11144122
Technical Information
DP570 Series Displays
Ordering information
8 | ©Danfoss | January 2017 L1328765 | BC00000231en-US0701

Inputs
DP570 Series Displays support the following pin types:
•Digital or Analog (DIN/AIN)
•Digital, Analog, or 4–20 mA (DIN/AIN/4–20 mA)
•Multifunction (DIN/AIN/FreqIN, Rheo, 4–20 mA)
DP570 Series Displays have input pins that support multiple functions. Pins that support multiple input
types are user-configurable using PLUS+1®GUIDE software.
Digital/Analog/CAN
Normal range multifunction input
Description Unit Minimum Maximum Comment
Range V 0 5.88 —
Resolution mV 2.14 —
Worst case error mV 130 —
Input impedance kΩ 233 ± 3 To 0 V
Input impedance with pull-down kΩ 14.1 ± 0.2 To 0 V
Input impedance with pull-up kΩ 14.1 ± 0.2 To 5 V
Input impedance with pull-up/down kΩ 7.3 ± 0.1 To 2.5 V
High range multifunction input
Description Unit Minimum Maximum Comment
Range mV 0 37.296 —
Resolution mV 14.3 —
Worst case error V 1.296 —
Input impedance kΩ 110 ± 2 To 0 V
Input impedance with pull-down kΩ 13.2 ± 0.2 To 0 V
Input impedance with pull-up kΩ 13.2 ± 0.2 To 5 V
Input impedance with pull-up/down kΩ 7 ± 0.1 To 2.5 V
Digital/Analog/4-20mA
Normal range multifunction input
Description Unit Minimum Maximum Comment
Range V 0 5.88 —
Resolution mV 2.14 —
Worst case error mV 130 Over the full temperature
range -30º C to +60º C (-22º F
to +140º F)
Input impedance kΩ 233 ± 3 No pull up or pull down
Input impedance with pull-down kΩ 14.1 ± 0.2 Pull down to ground
Input impedance with pull-up kΩ 14.1 ± 0.2 Pull up to +5 V
Input impedance with pull-up/down kΩ 7.3 ± 0.1 Pull up to +2.5 V
Technical Information
DP570 Series Displays
Inputs/outputs
©Danfoss | January 2017 L1328765 | BC00000231en-US0701 | 9

Current input
Description Unit Minimum Maximum Comment
Range mA 0 5.43 —
Resolution μA 21 —
Worst case error mA 1.7 Over the full temperature
range -30º C to +60º C (-22º F
to +140º F)
Input impedance Ω 100.76 ± 0.1 —
Technical Information
DP570 Series Displays
Inputs/outputs
10 | ©Danfoss | January 2017 L1328765 | BC00000231en-US0701