Danfoss Eco User manual

eco
HOME
Intelligent radiator thermostat

2
06/2015 VIJPD102 Danfoss Heating Solutions
Installation Guide
1. Installation
1.1 Identify your eco thermostat.........................................................4
1.2 In the package ......................................................................4
1.3 Overview of valve adapters ..........................................................5
1.4 Installing the right adapter ..........................................................6
1.5 Inserting the batteries...............................................................7
1.6 Using the buttons ...................................................................7
1.7 Setting time and date for the rst time ...............................................8
1.8 Installing eco .......................................................................8
1.9 Automatic adjustments..............................................................9
1.10 Removing eco ......................................................................9
1.11 Resetting eco to default settings................................................... 10
1.12 Removing an adapter from eco .................................................... 10
2. Technical specications................................................................. 11
Installation Guide eco Intelligent Radiator Thermostat

3
Danfoss Heating Solutions VIJPD102 06/2015
User Guide eco Intelligent Radiator Thermostat
User Guide
3. Display and menus
3.1 Home Screen ..................................................................... 12
3.2 Programme menu................................................................. 12
3.3 Function menu.................................................................... 13
3.4 Advanced menu .................................................................. 14
3.5 Pause ............................................................................. 15
4. Temperature and programme settings
4.1 Setting the comfort temperature .................................................. 16
4.2 Default programme settings ...................................................... 17
4.3 Adjusting programme setting P1 .................................................. 18
4.4 Adjusting programme setting P2 .................................................. 19
4.5 Creating a Travel programme ...................................................... 19
4.6 Overrule a Travel programme (early return) ........................................ 20
4.7 Changing an existing Travel programme ........................................... 21
4.8 Deleting a Travel programme ...................................................... 21
4.9 Adjusting the Pause temperature .................................................. 22
5. Additional settings
5.1 Setting the time................................................................... 23
5.2 Deactivating automatic daylight saving time ....................................... 23
5.3 Setting the Heating Control ....................................................... 24
5.4 Automatic valve exercising ........................................................ 25
5.5 Activating intelligent Control (Forecast) ............................................ 25
5.6 Limiting the temperature setting range ........................................... 26
5.7 Child Lock ........................................................................ 26
5.8 Pause ............................................................................ 26
5.9 Open-window function ........................................................... 27
6. Safety precautions...................................................................... 27
7. Disposal ................................................................................ 27

4
06/2015 VIJPD102 Danfoss Heating Solutions
1. Installation
1.1 Identify your eco thermostat
eco comes in several versions to meet the demands of dierent markets.To identify, see the code number on the box label.
Code no. Version characteristics Quick guide languages
014G0080 (DK) eco supplied with a separate RA-, RAV, RAVL and K adapter, to
be tted on a Danfoss RA, RAV and RAVL valve or competitor valves
with M30x1,5 thread.
Default MODERATE and FORECAST ON in software setting
DK, UK, FI, LT, EE, LV, IS, DE,
FR, ES, PT, IT
014G0081 (DE) eco supplied with a separate RA, RAV, RAVL and K adapter, to
be tted on a Danfoss RA, RAV and RAVL valve or competitor valves
with M30x1,5 thread.
Default QUICK and FORECAST OFF in software setting
DK, UK, FI, LT, EE, LV, IS, DE,
FR, ES, PT, IT
014G0082 (FR) eco supplied with a separate RA, COMAP and K adapter, to be
tted on a Danfoss RA valve,COMAP valves with M28x1,5 thread or
competitor valves with M30x1,5 thread.
Default QUICK and FORECAST OFF in software setting
DK, UK, FI, LT, EE, LV, IS, DE,
FR, ES, PT, IT
014G0083 (PL, UK, NL, BE, HR, HU, RO, SK, CZ, SI, NO) eco supplied with a
separate RA, RTD and K adapter, to be tted on a Danfoss RA, and
RTD valve or competitor valves with M30x1,5 thread.
Default QUICK and FORECAST OFF in software setting
PL, UK, NL, NO, CZ, HR, HU,
RO, SK, SI, FR, SE
014G0084 (AT) eco supplied with a separate RA, RTD, Hertz and K adapter,
to be tted on a Danfoss RA valve, RTD valves, Hertz valves with
M28x1,5 thread or competitor valves with M30x1,5 thread.
Default QUICK and FORECAST OFF in software setting
DK, UK, FI, LT, EE, LV, IS, DE,
FR, ES, PT, IT
014G0085 (FI, LT, EE, LV, IS) eco supplied with a separate RA-and K adapter, to
be tted on a Danfoss RA valve or competitor valves with M30x1,5
thread.
Default MODERATE and FORECAST OFF in software setting
DK, UK, FI, LT, EE, LV, IS, DE,
FR, ES, PT, IT
014G0086 (SE) eco supplied with a separate RA-, MMA, and K adapter, to be
tted on a Danfoss RA valve, an MMA valve with M28x1,5 thread or
competitor valves with M30x1,5 thread.
Default MODERATE and FORECAST OFF in software setting
PL, UK, NL, NO, CZ, HR, HU,
RO, SK, SI, FR, SE
014G0087 (ES, PT) eco supplied with a separate RA, Orkli, and K adapter, to be
tted on a Danfoss RA valve, an Orkli valve with M28x1 thread or
competitor valves with M30x1,5 thread.
Default QUICK and FORECAST OFF in software setting
DK, UK, FI, LT, EE, LV, IS, DE,
FR, ES, PT, IT
014G0088 (IT) eco supplied with a separate RA-, Herz and K adapter, to be
tted on a Danfoss RA valve, an Herz valve with M28x1,5 thread or
competitor valves with M30x1,5 thread.
Default QUICK and FORECAST OFF in software setting
DK, UK, FI, LT, EE, LV, IS, DE,
FR, ES, PT, IT
014G0089 (CH) eco supplied with a separate RA-, RAV, RAVL and K adapter, to
be tted on a Danfoss RA, RAV and RAVL valve or competitor valves
with M30x 1,5 thread.
Default QUICK and FORECAST OFF in software setting
DK, UK, FI, LT, EE, LV, IS, DE,
FR, ES, PT, IT
1.2 In the package (eco are supplied with the adapters as above.) Each pack contains:
eco sensor Quick Guide Allen key, 2 mm Adapter Guide
Installation Guide eco Intelligent Radiator Thermostat
RAV
(OldDanfoss)
RAVL
(OldDanfoss)
RA
(Danfoss)
M28
(Ø28mm)
Orkli,Comap,
Herz,MMA
013R9598
M30
(Ø30mm)
Heimeier, TA,
Oventrop,
Honeywell
Adapter
selection guide
RTD
(OldDanfoss)

5
Danfoss Heating Solutions VIJPD102 06/2015
1.3 Overview of valve adapters
Adapters for a wide range of dierent valve types are available as accessories.
Adapter type Code no. Adapter Valve
For Danfoss
RA valves 014G0251
For M30 x 1.5 (K)
valves 014G0252
For Danfoss
RAV valves
014G0250
34
For Danfoss
RAVL valves
26
For Danfoss
RTD valves 014G0253
For M28 valves:
- MMA 014G0255
- Herz 014G0256
- Orkli 014G0257
- COMAP 014G0258
Installation Guide eco Intelligent Radiator Thermostat

6
06/2015 VIJPD102 Danfoss Heating Solutions
1.4 Installing the right adapter
Adapter for RA valves
1. 2.
Place the RA adapter on the valve as shown. Tighten the adapter with the 2 mm Allen key.
Adapter for M30 x 1.5 (K) valves
1. 2.
Place the K adapter on the valve as shown. Hand-tighten the K adapter (max. 5 Nm).
Adapter for RAV valves (accessory)
1. 2.
Click the inner adapter on the valve. Hand-tighten the outer adapter (max. 5 Nm).
Adapter for RAVL valves (accessory)
1. 2.
Click the inner adapter on the valve. Hand-tighten the outer adapter (max. 5 Nm).
Installation Guide eco Intelligent Radiator Thermostat

7
Danfoss Heating Solutions VIJPD102 06/2015
Adapter for RTD valves (accessory)
1. 2.
Place the RTD adapter on the valve as shown. Hand-tighten the RTD adapter (max. 5 Nm).
Adapters for M28 valves (accessories)
Please follow the instructions supplied with the valve adapter for the specific M28 valve.
1.5 Inserting the batteries
Remove the battery cover and insert two AA batteries. Make sure the
batteries are correctly oriented.
Rechargeable batteries must not be used.
When replacing batteries the programme settings will be preserved,
but after two minutes the settings for time and date are reset.
The low battery symbol is displayed approx. one month before the
batteries run out.
After approx. two weeks the symbol will ash 14 times from 19:00
to 21:00 hrs.
Before the batteries run out eco will leave the valve in Frost Protection
position to protect the heating system from damage.
1.6 Using the buttons
eco has two arrow buttons which allow you to navigate the display
and the menus and to set the temperature.
The middle button is used to select and conrm.
If the display is o, press either button to activate the display.
Installation Guide eco Intelligent Radiator Thermostat

8
06/2015 VIJPD102 Danfoss Heating Solutions
1.7 Setting time and date for the rst time
1. 2.
When the batteries are installed the time
ashes on the display - 23:59.
a. Set hours with , press to confirm.
b. Set minutes with , press to confirm.
c. Set date with , press to confirm.
When ashes, press to confirm your
settings.
The display now switches to the Installation
Mode a large Mflashes on the screen.
1.8 Installing eco
1. Note! Activate Installation Mode 2.
Ensure you are in Installation Mode before you
mount eco. If not, press for 4 seconds.
A large M is flashing in the display to indicate
that Installation Mode is activated.
3. 4.
Screw eco onto the adapter and tighten by
hand (max. 5 Nm).
While slightly pressing forward, turn eco
clockwise untill it locks, then tighten.
Press for 4 seconds to fix eco.
Installation Guide eco Intelligent Radiator Thermostat

9
Danfoss Heating Solutions VIJPD102 06/2015
1.9 Automatic adjustments
When eco is installed it will automatically begin to adjust itself to your heating system.
During this process you might experience that the thermostat reacts slowly or turns the heat up
and down by itself. This is normal and a necessary part of the adjustment process.
1. Adjusting to the valve
During the first night of operation eco will shut off the radiator heat and then open again to detect
the exact opening point of the valve. This will allow eco to control the heat as efficiently as pos-
sible. If necessary, the procedure is repeated once a night for up to a week.
2. Intelligent Control (Forecast)
If you activate Intelligent Control eco learns during the first week of operation when it is necessary
to start heating the room in order to reach the correct temperature at the correct time.
The intelligent control will continuously adjust the heating time compared to seasonal tempera-
ture changes. To activate Intelligent Control see chapter 5.5.
Using Saving Program requires that your heating system has enough heat for a short period during
heat up. If your experience problems you should contact your installer.
1.10 Removing eco
1. 2.
Activate Installation Mode: Press for 4
seconds. When Mflashes, press .
A large Mis flashing in the display to indicate
that Installation Mode is activated.
3. 4.
Remove the battery cover and the batteries. Insert the Allen key or similar into the hole to
lock the adapter ring. Turn counterclockwise
to unscrew eco from the adapter.
Installation Guide eco Intelligent Radiator Thermostat

10
06/2015 VIJPD102 Danfoss Heating Solutions
1.11 Resetting eco to default settings
1. 2.
Remove the battery cover and take out one
battery.
Press and hold , Keep holding while rein-
serting the battery. The screen will show all
functions then return to a large flashing M.
1.12 Removing an adapter from eco
1. 2.
Remove the battery cover. Insert a small Allen key or similar into the lock-
ing hole to lock the adapter ring.
3. 4.
With the Allen key locking the adapter ring,
turn the adapter in the shown direction.
Put back the battery cover.
Mount eco on another valve adapter accord-
ing to the instructions supplied with the
adapter.
Installation Guide eco Intelligent Radiator Thermostat

11
Danfoss Heating Solutions VIJPD102 06/2015
Installation Guide eco Intelligent Radiator Thermostat
2. Technical specications
Thermostat type Programmable electronic radiator valve controller
Recommended use Residential (pollution degree 2)
Actuator Electromechanical
Display Grey digital with backlight
Software classication A
Control PID
Power supply 2 x 1.5 V alkaline AA batteries (not included)
Power consumption 3 μW in standby
1.2 W when active
Battery life Up to 2 years
Low battery signal Battery icon will ash in display.
If battery level is critical, the whole display will ash.
Ambient temperature range 0 to 40 °C
Transportation temperature range -20 to 65 °C
Maximum water temperature 90 °C
Temperature setting range 4 to 28 °C
Measurement interval Measures temperature every minute
Clock accuracy +/- 10 min/year
Spindle movement Linear, up to 4.5 mm, max. 2 mm on valve (1 mm/s)
Noise level <30 dBA
Safety classication Type 1
Weight (incl. batteries) 177 g (with RA adapter)
IP class 20 (not to be used in hazardous installations or in places
where it will be exposed to water)
Approvals, markings etc.
Intertek

12
06/2015 VIJPD102 Danfoss Heating Solutions
3. Display and menus
3.1 Home Screen
When pressing the Home Screen appears with basic information on programming and operation
of eco:
Time is shown with the dashed circle, each segment representing
30 minutes.
• Black segments = periods with comfort temperature.
• White segments = periods with setback temperature.
• Flashing segment = current time.
The chosen programme P0, P1, P2, (Travel)
or (Pause)
Day of week
The set temperature*
* eco is displaying the set temperature, not the measured room temperature.
3.2 Programme menu
1. To select the Programme menu:
If the display is off, press , then press again
to open theprogramme menu.
Use to shift between the programmes, press
to conrm. The chosen programme is flashing.
Display symbols in the Programme menu
P0Programme without automatic temperature reduction. This programme maintains the
comfort temperature of 21 degrees constant all day and night.
P1Saving programme which as default lowers the temperature to 17 °C at night (22:30 -
06:00 hrs). Time and temperature are congurable.
P2
Extended saving programme which as default lowers the temperature to 17 °Cat
night (22:30 - 06:00 hrs), and during the day on weekdays (08:00 - 16:00 hrs). Time and
temperature are congurable.
Pause program. The thermostat will maintain a constant temperature of 4-10 °C in the
room, ensuring frost protection.
Note! Symbols must be flashing to be activated.
User Guide eco Intelligent Radiator Thermostat

13
Danfoss Heating Solutions VIJPD102 06/2015
3.3 Function menu
1. 2.
To select the Function menu:
If the display is off, press , then press both
and hold for 3 seconds.
Use to shift between functions.
Display symbols in the Function menu
Installation Mode must always be activated when installing or removing eco. The
thermostat may be irreparably damaged if not in the correct position during installation.
Travel programme which lowers the temperature when you are away. Date, time and
temperature are congurable.
Set time and date - see chapter 5.1.
P1Saving programme, adjust the default settings. Time and temperature are conguarable,
weekdays and weekend days.
P2Extended saving programme, adjust the default settings. Time and temperature are
conguarable, weekdays and weekend days.
Pause programme. To set the default Pause temperature.
Note! Symbols must be flashing to be activated.
User Guide eco Intelligent Radiator Thermostat

14
06/2015 VIJPD102 Danfoss Heating Solutions
3.4 Advanced menu
1. 2
To select the Advanced menu:
If the display is off, press , then press
and hold for 3 seconds to open the Function
menu.
Press both buttons for 3 seconds to open
the Advanced menu.
Display symbols in the Advanced menu
Conrm selection.
Deactivate/activate automatic daylight saving time - see chapter 5.2.
Deactivate/activate intelligent control (Forecast) - see chapter 5.5.
Select moderate or quick heating control - see chapter 5.3.
Set the max and min temperature range - see chapter 5.6
Child Lock - see chapter 5.7
Note! Symbols must be flashing to be activated.
User Guide eco Intelligent Radiator Thermostat

15
Danfoss Heating Solutions VIJPD102 06/2015
User Guide eco Intelligent Radiator Thermostat
3.5 Pause
1. 2.
To activate Pause from the programme menu.
If the display is off, press .
Press again to open the Programme menu.
The Pause symbol is flashing .
To confirm you want to set the eco into Pause,
press .
3. 4.
The whole display will blink slowly to indicate
that Pause is activated.
To remove Pause press twice, the eco will
return to the home screen.
Note! The default Pause temperature is 6 °C, to adjust the Pause temperature see chapter 4.9.

16
06/2015 VIJPD102 Danfoss Heating Solutions
User Guide eco Intelligent Radiator Thermostat
4. Temperature and programme settings
4.1 Setting the comfort temperature
1. 2.
If the display is off, press .
Use the buttons to raise or lower the comfort
temperature (default temperature 21 ° C). eco
will maintain the new comfort temperature
until the next setback or comfort period.
If the temperature is changed during a setback
period (default 17 ° C), the new temperature
will only be valid for this setback period.
For a permanent change of the setback tem-
perature, see chapter 4.3.
3. 4.
20 cm
If the comfort temperature is set at its lowest,
the MIN and temperature show, indicating the
minimum constant temperature.
eco is measuring the temperature with two
built-in sensors - one behind the display and
one near the valve.
Based on both readings the room tempera-
ture is calculated for an area approx. 20 cm in
front of the display. This allows eco to control
the actual room temperature very accurately.
Be aware that sources of cold or heat, e.g.
fireplace, direct sun or draft, might affect the
function of eco.
Note! If the set temperature is raised more than 1 °C eco will boost the radiator heat to reach the new
temperature faster. You can feel the valve and radiator are getting warmer.
Minor temperature changes will not evoke a heat boost, and so the changes are made without any
immediate indication.

17
Danfoss Heating Solutions VIJPD102 06/2015
4.2 Default programme settings
Programme P0
This programme is without automatic temperature reduction. It will maintain the temperature at a
constant comfort level all day and night.
The default comfort temperature is 21 °C, but can be adjusted to any level between 6 and 28 °C.
0 3 6 9 12 15 18 21 24
21 °C
Programme P1
This is the default savings programme, which has a comfort temperature of 21 °C and one setback
period from 22:30 to 6:00 hrs with a temperature of 17 °C. Time and temperature are congurable for
both comfort and setback periods.
0 3 6 9 12 15 18 21 24
17 °C 21 °C 17 °C
Programme P2
This is the extended savings programme with a setback period from 22:30 to 6:00 hrs and an addi-
tional setback period from 8:00 to 16:00 hrs on weekdays. Time and temperature are congurable
for both comfort and setback periods.
Weekdays:
0 3 6 9 12 15 18 21 24
17 °C 21 °C 17 °C 21 °C 17 °C
Weekend:
0 3 6 9 12 15 18 21 24
17 °C 21 °C 17 °C
Travel Programme
This programme keeps the setback temperature ( default 17 °C) all day and night. Use the pro-
gramme to save energy, when you are away from home. Time and temperature are congurable.
0 3 6 9 12 15 18 21 24
17 °C
Pause Programme
This programme keeps a low temperature ( default 6 °C) all day and night. Use the programme to
prevent damage of the radiator, when you are away from home. The temperature is congurable.
0 3 6 9 12 15 18 21 24
6 °C
User Guide eco Intelligent Radiator Thermostat

18
06/2015 VIJPD102 Danfoss Heating Solutions
User Guide eco Intelligent Radiator Thermostat
4.3 Adjusting the programme settings, P1
Change the default P1 and P2 programmes to your own schedule and preffered time and tempera-
ture settings.
1. 2.
If the display is off, press , then press and
hold both for 3 seconds to open the Func-
tion menu.
Use to select P1 programme. When the
chosen programme is flashing, press to
conrm.
Start time for weekday comfort period is flash-
ing. Use to set the start time, press to
select.
3. 4.
Stop time for the comfort period is flashing.
Use to set the stop time, press to select.
Once the time is chosen, press to conrm.
Comfort temperature is flashing. Use to set
the comfort temperature, press to select.
5. 6.
The setback temperature is flashing. Use to
set the setback temperature, conrm using .
Start time for weekend comfort period is flash-
ing. Use to set the start time, press to
select.

19
Danfoss Heating Solutions VIJPD102 06/2015
5. 6.
Stop time for the weekend comfort period is
flashing. Use to set the stop time, press
to select.
When flashes, press to confirm the entire
P1 Programme.
4.4 Adjusting the programme settings, P2
eco P2programme is adjusted as P1.
Note - Weekdays have 2 comfort periods.
4.5 Creating a Travel programme
A Travel programme keeps the setback temperature for a period, defined by you.
Use a Travel programme to save energy, when you are away from home.
1. 2.
If the display is off, press , then press both
and hold for 3 seconds to open thefuntc-
tion menu.
Use to select . When the suitcase symbol
flashes, press to conrm.
The current day is ashing. Use to set the
day of departure, press to conrm.
Now the current month is ashing. Use
to set the month of departure, press to
conrm.
User Guide eco Intelligent Radiator Thermostat

20
06/2015 VIJPD102 Danfoss Heating Solutions
User Guide eco Intelligent Radiator Thermostat
3. 4.
The day of return is ashing. Use to set the
day of return, press to conrm.
Now the month of return is ashing. Use
to set the month of return, press to conrm.
The setback temperature is ashing. Use
to set the setback temperature, press to
conrm.
5. 6.
flashes, press to conrm your Travel
programme. is now displayed on the Home
Screen.
When the date of departure arrives, the
display will show: , set Travel period and the
setback temperature.
4.6 Overrule a Travel programme (early return)
If returning earlier than expected you might wish to shift from the Travel programme to your
normal programme.
1. 2.
If the display is off, press . The display will
show: , set Travel period and the setback
temperature.
Press again to open theprogramme menu.
Use to select the usual programme P0, P1
or P2, press to conrm.