Daniamant ODEO Strobe User manual

English Version
ODEO Strobe™
Installation and Maintenance Instructions
Description
The ODEO Strobe™ is a manually activated position indicating light. It meets and exceeds the SOLAS
requirements for a lifejacket light with an additional IR component to the signal.
Daniamant Limited
Unit 3, The Admiral Park, Airport Service Road, Portsmouth, UK PO3 5RQ
Telephone: [phone] Facsimile: [phone]
www.daniamant.com
32-109 Issue 1 (C6789)

Installation
1. Remove from external packaging.
2. Open battery compartment by ensuring white tab is raised and twisting off base.
3. Fit four 1.5v AA cells. Cells used must be from these brands:
• Varta Alakline
• Ansmann Industrial Lithium
• Energizer Ultimate Lithium
• Energizer Industrial Alkaline
(Lithium for best performance)
DO NOT MIX BATTERY CHEMISTRIES OR OLD AND NEW BATTERIES
4. Close battery compartment, and engage white locking tab.
5. Secure ODEO Strobe™in a suitable location so that it may be accessed quickly in an emergency,
such as a grab bag, or directly to lifejacket.
Lifejacket Mounting
Attach lanyard to secure loca-
tion.
Slide hook and loop strap un-
der webbing.
Secure light in place. Take care
to avoid interfering with correct
operation of lifejacket.
Usage
Activate the strobe by turning the white ring in the direction of the arrow, then hold vertically above the
head position.
It is recommended that spare AA batteries are stored at all times with the ODEO Strobe™ flare to ensure
extended operation if required.
2

Do not look into the flare, or direct flare into the eyes of
nearby persons.
Maintenance
Regularly inspect the unit for signs of damage and make sure that the batteries are installed and ready
to activate.
Replace the batteries each year to ensure the unit is ready to be deployed.
Please note, other than the batteries, there are no user serviceable parts inside this light. If the light fails
to illuminate during test, it needs to be replaced.
Testing
Do not look into the flare, or direct flare into the eyes of nearby persons.
It is recommended testing is carried out on a regular basis, depending on use. Please note that excessive
testing or demonstrations will reduce battery life available for an emergency.
Warranty
Your ODEO Strobe™ electronic flare is warranted against manufacturing defects in material and work-
manship for a period of 2 years from the date of purchase. Daniamant will, at its discretion, repair or
replace faulty product free of charge. Proof of purchase will be required in order for a warranty claim
to be valid from the original purchase. All claims should be made in writing to the original vendor or
Daniamant.
Tampering with the unit will void any warranty.
Disclaimer
The technical data, information and illustrations in these instructions are believed to be correct at the
time of print. No liability is accepted for any inaccuracies or omissions.
3

Product Disposal Instructions
Daniamant’s Survivor Location Lights contain batteries as well as electrical and
electronic components, and must therefore be segregated from the domestic
waste stream and recycled. Disposing of this product correctly will help save
valuable resources and prevent any potential negative effects on human health
and the environment, which could otherwise arise from inappropriate waste han-
dling. Daniamant’s lights are marked with the symbol below which conveys that
this waste must be treated separately from household waste.
To ensure compliance with the WEEE and Battery Regulations, the Survivor Lo-
cation Lights placed on the market in the UK or Denmark should be returned to
Daniamant in the UK or Denmark, or deposited in your nearest WEEE Designated Collection Facility,
operated by your Local Authority.
Further copies of this installation and maintenance instructions
are available to download from our website www.daniamant.com
A copy of these instructions must be held with the ships/owners training manual.
4