Daniela DAN90ASO User manual

DANIELA
APPLIANCE S
DAN90ASO
USER MANUAL
FULL GRILLFULL GRILL

C
O
O
K
I
N
G
W
I
T
H
S
T
Y
L
E
p
p
l
i
a
n
c
e
s
.
c
o
m
.
a
u
APPLIANCES
D A NIE L A
APPLIANCE S
w w w .danielaappliances.com . a u
Italian Designed. Australian at Heart
Over 20 years of passionate design for cooking appliances,
Daniela is committed to providing exceptional products and
customer service while always keeping the Australian family at
heart, so you can Cook With Style!
Using only key European made components, we carefully and
meticulously design our products with durability, functionality and
aesthetics in mind, allowing you to keep cooking longer with style.
We stand by our products with 24 months in home warranty
backed by our local call centre and also our very own technicians.

D A NIELA
DAN90ASO
P | 0 2 9 6 04 1 2 2 6 E | s a l e [e-mail] . au | W d a n ielaappliances.com . a u
Pg 2
DAN90ASO
90cm Built-in 10 function oven with rotisserie
This manual contains instructions for your brand new oven
below, these instructions include maintenance and care for
your oven as well detailed descriptions of the many features
available to you.
If you have any questions about your new oven, please feel free
to email us your inquiry and one of our support team will gladly
assist you.
We hope you love your new oven!
From everyone at Daniela Appliances

P I 02 9604 1226 E I [e-mail] W | danielaappliances.com.au
PAGE 4
IMPORTANT SAFETY & CARE INSTRUCTIONS
THESE WARNINGS ARE PROVIDED IN THE INTEREST OF SAFETY. PLEASE READ THEM
CAREFULLY BEFORE INSTALLING OR USING THE APPLIANCE.
• The manufacturer disclaims all responsibility if these instructions are not followed. Should
you have any doubts, seek the assistance of an authorised person.
To maintain the EFFICIENCY and SAFETY of this appliance, we recommend:
• Call only Service Centres authorized by DANIELA APPLIANCES PTY LTD
• Always use original Spare Parts.
1. This appliance is intended for non-professional use within the home and It is intended
solely for cooking foodstus, it comes with 24-month parts and labour warranty,
commencing date of purchase. Commercial warranty on Daniela Appliances are strictly
3 months from date of purchase.
2. Daniela Appliances Pty Ltd will not be held responsible for any damage due to: Incorrect
installation, improper, incorrect and irrational use.
3. Before using the appliance, read the user manual carefully. Always keep this user manual
close to hand since you may need to refer to it in the future.
4. After remove the packing, check that the appliance is not damaged. If you have any doubts,
NO NOT USE OR INSTALL the appliance, contact Daniela Appliances Pty Ltd or the store
where you purchased the appliance, failure in doing so may aect your warranty options.
5. Never leave the packing components (within the reach of children since they are a source
of potential danger).
SAVE THIS INSTRUCTION IN A SAFE PLACE FOR FUTURE REFERENCE
Thank you for choosing Daniela appliances!
Please read all instructions before using this appliance. This book contains valuable
information about operation, care and service. Keep it in a safe place for future
reference. Should the appliance be sold or transferred to another owner, or should
you move house and leave the appliance, always ensure that the book is supplied
with the appliance in order that new owner can be acquainted with the functioning of
the appliance and relevant warnings.
The manufacturer cannot be held responsible for any inaccuracies due to printing or
transcription errors that may be found in this handbook.
N.B.: the pictures shown in the figures in this handbook are purely indicative.
D A NIELA
DAN90ASO
P | 0 2 9 6 04 1 2 2 6 E | s a l e [e-mail] . au | W d a n ielaappliances.com . a u
Pg 3

P I 02 9604 1226 E I [e-mail] W | danielaappliances.com.au
PAGE 5
6. The appliance must be installed only by a qualified person in compliance with the
instructions provided. The manufacturer declines all responsibility for improper installation
which may harm persons and animals and damage property.
7. The Appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervised instruction concerning use of the appliance by a responsible
person for their safety. Cleaning and maintenance operations must not be carried out by
children without supervision.
8. The electrical safety of this appliance can only be guaranteed if the appliance is correctly
and eciently earthed, in compliance with current regulations on electrical safety. Always
ensure that the earthing is ecient; if you have any doubts call in a qualified electrician to
check the system. The manufacturer declines all responsibility for damage resulting from
a system which has not been earthed. plastic bags, foamed polystyrene, nails, etc.).
9. NOTE: When the oven is first used, an odour may be emitted, this will cease after a period
of use. This odour is due to temporary finish on oven liners and elements and also any
moisture absorbed by the insulation. It is recommended to burn out the excess finishing’s
on the liners of the oven before usage.
10. Ensure that the appliance is switched o before undertaking any maintenance,
by switching o the main switches and turning all knobs to “OFF” position.
11. The openings and slots used for ventilation and dispersion of heat on the rear and below
the control panel must never be covered.
12. The user must not replace the supply cable of this appliance. Always call an after-sales
servicing centre authorized by Daniela Appliances in the case of cable damage or replacement.
13. This appliance must be used for the purpose for which it was expressly designed. Any
other use is considered to be improper and consequently dangerous. The manufacturer
declines all responsibility for damage resulting from improper and irresponsible use.
14. Parts of this appliance and its cooking surfaces, retain heat for considerable periods of time
after switching o when touching these areas before they have completely cooled down.
15. When the appliance is in use, the heating elements and some parts of the oven door
become extremely hot. Make sure you don’t touch them and keep children well away.
16. If you use the power code for single phase, the minimum cross-sectional area is 4mm2.
For three phases, the minimum cross-sectional area is 2.5 mm2.
17. The appliance that you have bought may be slightly dierent from the one illustrated in
this manual. Please refer to the information related to the model you have.
18. If the surface is cracked, switch o the appliance to avoid the possibility of electric shock.
(If the hob surface is of glass-ceramic or similar material and protects live parts).
19. A number of fundamental rules must be followed when using electrical appliances.
The following are of particular importance:
D A NIELA
DAN90ASO
P | 0 2 9 6 04 1 2 2 6 E | s a l e [e-mail] . au | W d a n ielaappliances.com . a u
Pg 4

P I 02 9604 1226 E I [e-mail] W | danielaappliances.com.au
PAGE 6
PLEASE ENSURE YOU READ THESE INSTALLATION GUIDES, RULES, TERMS AND
CONDITIONS BEFORE CALLING FOR A SERVICE. FAILURE IN DOING SO MAY RESULT
IN DAMAGES TO THE APPLIANCE AND JOINERY – CHARGES MAY BE APPLICABLE AND
WARRANTY WILL BE VOIDED.
• Never allow the Mains Cable to be stretched, pulled or damaged if the appliance is moved
for cleaning etc. Do not use the appliance if the Mains Cable is damaged,
consult a qualified electrician.
• Do not modify or attempt to modify any of the characteristics of this appliance.
This would be dangerous to your safety.
• Do not leave the appliance outside under the sun, rain, etc.
• Do not touch any electrical appliance if hands or feet are wet or damp.
• Do not use the appliance bare footed.
• Do not allow the appliance to be used unsupervised by children or persons
unfamiliar with it.
• Do not use steam cleaners, as this may cause moisture build up.
• Do not use caustic oven cleaning products, abrasive chemicals, harsh solvents, wax
polish, metal scrapers or steel wool, as these may damage the cavity of your oven.
• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven glass door
since they can scratch the surface, which may result in shattering of the glass.
• To clean both the electronic programmer window and the oven door, use a window
washing product applied to a soft cloth.
• Ensure that the appliance is switched o before cleaning.
• Warning: The glass on this door is made from a toughened material that can withstand
heat and cooling without breaking, however as a precaution do not wipe with cold water
while hot.
• Always clean after every use to avoid build up and the necessity of stronger
cleaning products.
• At the end of cooking, do not pick up oven or grill items (grid, rotisserie) with your bare hands.
• Never pull your appliance by the door handle.
• Do not grill with the oven door open.
• Do not use this appliance as a space heater.
• Do not use the base of the oven for cooking. This could damage the oven.
D A NIELA
DAN90ASO
P | 0 2 9 6 04 1 2 2 6 E | s a l e [e-mail] . au | W d a n ielaappliances.com . a u
Pg 5

P I 02 9604 1226 E I [e-mail] W | danielaappliances.com.au
PAGE 7
• Do not use oven door as a shelf, bench or seat, and make sure that children are able
neither to climb nor sit on it.
• Do not push down on the open oven door.
• Before using your new oven, Run the oven at 200c Before using your oven for the first
time, heat it while empty for approximately 15 minutes. Please ensure you heat each
element in the oven before use.
• Note, that when first using the oven, ensure that the room is well ventilated (e.g. open a
window or use an extractor fan) and that persons who may be sensitive to the odour avoid
any fumes. It is suggested that any pets be removed from the room until the smell has ceased.
WARNING
• The appliance and the accessible parts of it will become hot during use. Be careful not to
touch the heated elements. Children must not be allowed to touch the appliance, unless
they are supervised continually.
• Only a qualified person in compliance with the instructions provided must install the
appliance. Appliance are fully assembled as in normal operation without any parts
removed. Daniela Appliances Pty Ltd declines all responsibility for improper installation,
which may harm persons and animals and damage property.
• Ensure that the appliance is switched o before undertaking any maintenance,
by switching o the main switches and turning all knobs to “OFF” position.
D A NIELA
DAN90ASO
P | 0 2 9 6 04 1 2 2 6 E | s a l e [e-mail] . au | W d a n ielaappliances.com . a u
Pg 6

P I 02 9604 1226 E I [e-mail] W | danielaappliances.com.au
PAGE 8
INSTALLATION
In order to ensure that the built-in appliance functions properly, the cabinet containing it must
be appropriate. The figure below gives the dimensions of the cut-out for installation under the
counter.
In order to ensure adequate ventilation, the back panel of the cabinet unit must be removed.
The oven must have a 40mm clearance between the oven and the rear timber panel.
The panels of the adjacent cabinets must be made of heat-resistant material. In particular,
cabinets with a veneer exterior must be assembled with glues which can withstand temperatures
of up to 100ºC.
In compliance with current safety standards, contact with the electrical parts of the oven must not
be possible once it has been installed.
The oven must be secured by 4 screws to the cabinet.
D A NIELA
DAN90ASO
P | 0 2 9 6 04 1 2 2 6 E | s a l e [e-mail] . au | W d a n ielaappliances.com . a u
Pg 7

P I 02 9604 1226 E I [e-mail] W | danielaappliances.com.au
PAGE 9
ELECTRICAL CONNECTION
Those ovens equipped with a three-pole power supply cable are designed to operate with an
alternating current. The wire for earthling the appliance is yellow-green in colour.
CONNECTING THE SUPPLY CABLE TO THE MAINS
Install a standardized plug corresponding to the load indicated on the data plate. When
connecting the cable directly to the mains, install an omni polar circuit breaker with a minimum
contact opening of 3 mm between the appliance and the mains. The omni polar circuit breaker
should be sized according to the load and should comply with current regulations (the earth wire
should not be interrupted by the circuit breaker).
The supply cable should be positioned so that it does not reach a temperature of more than
50ºC with respect to the room temperature, anywhere along its length, or protected by insulation
sleeping having an appropriate rating.
Before making the connection, check that:
• The electrical safety of this appliance can only be guaranteed if the oven is correctly and
eciently earthed, in compliance with regulations on electrical safety.
• Always ensure that the earthling is ecient; if you have any doubts call in a qualified
technician to check the system.
• The manufacturer declines all responsibility for damage resulting from a system which
has not been earthed.
• Before plugging the appliance into the mains, check that the specifications indicated on
the date plate (on the appliance and /or packaging) correspond to those of the electrical
mains system of your home.
• Check that the electrical capacity of the system and sockets will support the maximum
power of the appliance, as indicated on the data plate. If you have any doubts, call
in a qualified technician.
• If the socket and appliance plug are not compatible, have the socket replaced with a
suitable model by a qualified technician.
• The latter in particular, will also have to ensure that the cross section of the socket
cables, are suitable for the power absorbed by the appliance.
• The use of adapters, multiple sockets and /or extensions, is not recommended. If their
use cannot be avoided, remember to use only single or multiple adapters and
extensions which comply with current safety regulations. In these cases, never exceed the
maximum current capacity indicated on the single adapter or extension and the maximum
power indicated on the multiple adapter.
D A NIELA
DAN90ASO
P | 0 2 9 6 04 1 2 2 6 E | s a l e [e-mail] . au | W d a n ielaappliances.com . a u
Pg 8

P I 02 9604 1226 E I [e-mail] W | danielaappliances.com.au
PAGE 10
• The plug and socket must be easily accessible. IMPORTANT.
• If the oven is to work properly, the kitchen housing must be suitable.
• The panels of the kitchen unit that are next to the oven must be made of a heat resistant
material.
• Ensure that the glues of units that are made of veneered wood can with stand
temperatures of at least 120 ºC.
• Plastics or glues that cannot withstand such temperatures will melt and deform the unit,
once the oven has been lodged inside the units, electrical parts must be completely
insulated. This is a legal safety requirement.
• All guards must be firmly fixed into place so that it is impossible to remove them without
using special tools.
• Remove the back of the kitchen unit to ensure an adequate current of air circulates around
the oven. The hob must have a rear gap of at least 45 mm.
• All guards must be firmly fixed into place so that it is impossible to remove them without
using special tools.
• Remove the back of the kitchen unit to ensure an adequate current of air circulates around
the oven. The hob must have a rear gap of at least 45 mm.
TECHNICAL SPECIFICATIONS
Inner dimensions of the oven:
• Width 65.7cm
• Depth 43.5cm
• Height 35.1cm
Inner Volume of the oven 105 litres
Voltage and Frequency of Power Supply: 220-240V ~50/60Hz or 50H
• DURING USE THE APPLIANCE BECOMES HOT! CARE SHOULD BE
TAKEN TO AVOID TOUCHING HEATING ELEMENTS INSIDE THE OVEN.
• ACCESSIBLE PARTS MAY BECOME HOT DURING USE. YOUNG
CHILDREN SHOULD BE KEPT AWAY.
• DO NOT USE HARSH ABRASIVE CHEMICALS TO SHARP METAL
SCRAPERS TO CLEAN THE OVEN GLASS!!! THEY CAN SCRATCH THE
SURFACE, WHICH MAY RESULT IN THE SHATTERING OF THE GLASS.
D A NIELA
DAN90ASO
P | 0 2 9 6 04 1 2 2 6 E | s a l e [e-mail] . au | W d a n ielaappliances.com . a u
Pg 9

P I 02 9604 1226 E I [e-mail] W | danielaappliances.com.au
PAGE 11
D A NIELA
DAN90ASO
P | 0 2 9 6 04 1 2 2 6 E | s a l e [e-mail] . au | W d a n ielaappliances.com . a u
Pg 10

P I 02 9604 1226 E I [e-mail] W | danielaappliances.com.au
PAGE 12
A. Control Panel
B. Cooking mode selection knob
C. Cooking temperature selection knob
D. Electronic programmer-Allows you to
programme the desired cooking times
by selecting the cooking duration and
the end cooking time. It can also be used
as a timer (only available on certain
models)
E. Oven indication light (only available on
certain models)
• When lit, it indicates the oven is
heating up to the set temperature or
the heat plate is heating according to
the heating model set.
F. Dripping Pan or Baking Sheet N.
Carrying backward button
G. Oven Rack
H. Carrying forward button
I. Guides for sliding the racks or dripping in
and out 6. Automatic program
J. End Cooking Time Knob 7. Duration and
manual mode
K. Timer 8. Minute control
L. Cooking Duration time with automatic
operation
M. End of cooking time
N. Carrying backwards button
O. Carrying forward button
6. Automatic program
7. Duration, Delay and Manual cooking
8. Minute minder
D A NIELA
DAN90ASO
P | 0 2 9 6 04 1 2 2 6 E | s a l e [e-mail] . au | W d a n ielaappliances.com . a u
Pg 11

P I 02 9604 1226 E I [e-mail] W | danielaappliances.com.au
PAGE 13
This multifunction oven combines the advantages of traditional convection oven with those
of the more modern fan assisted models in a single appliance.
It is an extremely versatile appliance that allows you to choose easily and safely between
dierent cooking modes. The various features oered by the oven are selected by means of
selector knob “B” and thermostat “C” situated on the control panel.
Notice: The first time you use your appliance, we recommend that you set the thermostat to the
highest setting and leave the oven on for about half an hour with nothing in it, with the oven door
shut. Then, open the oven door and let the room air in. The odour that is often detected during
this initial use is due to the evaporation of substances used to protect the oven during storage
and until it is installed.
Notice: Place the dripping pan provided on the bottom shelf of the oven to prevent any sauce
and/or grease from dripping onto the bottom of the oven only when using the rotisserie
(only available on certain models).
Never place anything on the bottom of the oven during operation as this could damage the
enamel finishing. Place your cookware (dishes, aluminium foil, etc.) On the racks provided with
the appliance inserted especially along the oven guides.
Notice: to use the oven in manual mode (not using the end cooking time programmer);
the symbol must be aligned with the reference mark on the control panel.
ROTISSERIE
HOW TO USE YOUR OVEN
To start the rotisserie, proceed as follows:
• Insert the rotisserie rod “A” into the drive
unit and groove “B” into bend “C”;
• urn the plastic handle “D” anti-clockwise
and slide the rack into the oven runners
ensuring that the rod “E” slots into
the hole “F”;
• The rotisserie rack must always
be fitted in the middle of the oven
(second position from bottom);
• Start the turnspit using knob “B”
to select setting.
D A NIELA
DAN90ASO
P | 0 2 9 6 04 1 2 2 6 E | s a l e [e-mail] . au | W d a n ielaappliances.com . a u
Pg 12

D A NIELA
DAN90ASO
P | 0 2 9 6 04 1 2 2 6 E | s a l e [e-mail] . au | W d a n ielaappliances.com . a u
Pg 13
DEFROST
CONVENTIONAL
FAN BAKE
FAN FORCE
MULTI-COOKING MODE
GRILL
PASTRY BAKE
FAN GRILL
OVEN FUNCTIONS
The new DAN90SO features 10 functions which includes a variety of cooking
modes for many types of cooking styles such as baking, fan baking and pizza.
You can find a detailed description of what these functions do on our website
at www.danielaappliances.com.au/oven-functions
PIZZA BAKE
TOP ELEMENT

D A NIELA
DAN90ASO
P | 0 2 9 6 04 1 2 2 6 E | s a l e [e-mail] . au | W d a n ielaappliances.com . a u
Pg 14

P I 02 9604 1226 E I [e-mail] W | danielaappliances.com.au
PAGE 16
SETTING THE TIME (CLOCK)
• Select the clock function by simultaneously pressing the Duration (2) and End of Cooking (3)
time keys and adjust the clock by means of the +/- 4+5 keys.
• All the Programs set will be cancelled and relay will switch o.
• NOTE: THIS OVEN WILL NOT OPERATE UNTIL THE TIME HAS BEEN SET!!
MANUAL OPERATION
• Simultaneously press the Duration (2) and End of cooking (3) time keys
(the auto symbol will be cancelled).
• the saucepan symbol will light up. Any program set will be cancelled.
SEMI AUTOMATIC OPERATION AND COOKING DURATION
• Press the Cooking duration (2) key and set the duration by means of the +/- (4+5) keys.
The saucepan symbol will appear.
• The relay output will be activated.
• If clock = end of the cooking time, the relay and saucepan symbol will be o.
• The buzzer will sound and symbol A will blink.
SEMI AUTOMATIC OPERATION AND END OF COOKING TIME
• Press the end of cooking time key (3) and set the required time by means
of the +/- (4+5) keys.
• The symbol A and the symbol of the saucepan will light up.
• The relay output will be activated.
• If clock = end of the cooking time, the relay and saucepan symbol will switch o.
• The buzzer will sound and the symbol A will blink.
COMPLETELY AUTOMATIC OPERATION
• Press the duration key (2) and set the required time by means of the +/- keys (4+5).
The symbol A will appear.
• The relay will come on the saucepan symbol will appear.
• Select the End of cooking time function (3)- the minimum setting time will appear.
• Set the required time by means of the +/- keys (4+5).
• The saucepan symbol will re-appear when the clock time = the calculated switch on time.
• After setting the automatic program the symbol A will blink. The buzzer will sound and the
saucepan symbol and relay will switch o.
D A NIELA
DAN90ASO
P | 0 2 9 6 04 1 2 2 6 E | s a l e [e-mail] . au | W d a n ielaappliances.com . a u
Pg 15

P I 02 9604 1226 E I [e-mail] W | danielaappliances.com.au
PAGE 17
MINUTE MINDER
• Press the Minute control key (1) and set the required time by means of the +/- keys (4+5).
• While the set time runs, the bell symbol will appear.
• When the set time elapses, the buzzer will sound.
BUZZER
• The buzzer remains active for 7 minutes after the minute control cycle or the cooking
program has finished.
• Press any function key to stop the buzzer.
PROGRAM START-UP AND CHECK
• A set program is run when the required time has also been set. The remaining timers can be
checked at any time by selecting the relevant function.
SETTING ERROR
• The setting is not correct if the clock time is between the beginning of the cooking time and
the end of the cooking time.
• The error is indicated via sounding of a buzzer and blinking of the Auto symbol.
• An incorrect setting can be corrected by re-setting either the beginning
or end of cooking time.
CANCELLING A PROGRAM
• A program can be cancelled by selecting the manual function.
• A set program is automatically cancelled when it reaches the end of its cycle.
THE OVEN LIGHT
• Set knob “B” to the symbol to turn it on.
• It lights the oven and stays on when any of the electrical heating elements in the oven come on.
COOLING VENTILATION
In order to cool down the exterior of the appliance, this model is equipped with a cooling fan,
which comes on automatically when the oven is hot.
When the fan is on, a normal flow of air can be heard exiting between the oven door and the
control panel.
Note: When cooking is done, the fan stays on until the oven cools down suciently.
D A NIELA
DAN90ASO
P | 0 2 9 6 04 1 2 2 6 E | s a l e [e-mail] . au | W d a n ielaappliances.com . a u
Pg 17

P I 02 9604 1226 E I [e-mail] W | danielaappliances.com.au
PAGE 18
MAINTAINING YOUR OVEN
This appliance is for household use only, don’t use it outdoors!
IMPORTANT:
Unplug your oven before cleaning, or performing maintenance!
To extend the life of your oven, it must be cleaned frequently.
HOW TO CLEAN YOUR OVEN
WARNING!!
• NEVER USE STEAM CLEANERS OR PRESSURE CLEANERS TO CLEAN YOUR APPLIANCE,
AS THEY CAN CAUSE MOISTURE BUILD UP!
• NEVER USE CAUSTIC OR ABRASIVE CLEANERS OF ANY KIND AS THEY WILL DAMAGE
YOUR OVEN!
• NEVER USE ABRASIVE PADS TO CLEAN ENAMELLED, CHROMED OR STAINLESS
STEEL SURFACES.
1. Wait until the oven has cooled to before removing oven shelving and racks. Wash in
lukewarm soapy water (and household cloudy ammonia if necessary). And dry at the end.
It is recommended to wash after every use especially after roasting and grilling to
avoid, stubborn build-up of grease and fats. If stains are dicult to remove use only non-
caustic specialised cleaning products.
2. Leave the oven door open whilst it is drying.
3. Regularly wipe the control panel with a microfibre cloth to avoid damage to the control
panel and the enamel.
4. When using commercially stainless-steel cleaning products avoid cleaning any lettering or
symbols as the can become damaged.
5. Not recommended; However, if you use a non-caustic oven cleaner, follow the instructions
on the product carefully.
6. Chrome shelves: Use detergent and hot water. If very dirty use a non-abrasive nylon scour.
7. After every use and while still warm, wash pan and grill insert with warm soapy water
and a suitable sponge. Rinse and dry before replacing in position. Oven Pan/Tray is
dishwasher friendly.
D A NIELA
DAN90ASO
P | 0 2 9 6 04 1 2 2 6 E | s a l e [e-mail] . au | W d a n ielaappliances.com . a u
Pg 18

P I 02 9604 1226 E I [e-mail] W | danielaappliances.com.au
PAGE 19
All grades of stainless steel can stain, discolour or becomes greasy. Clean the cooker regularly,
using the procedures outlined below.
Care must be taken when wiping exposed stainless-steel edges as they can be sharp.
• The front frame around the oven can be cleaned with stainless steel cleaners if it comes
soiled or discoloured. Avoid cleaning any lettering or symbols as the can become damaged.
• Always clean the stainless steel in the direction of the grain. Going against the grain may
scratch the surface.
DOOR CLEANING
1. Wait until the oven door has cooled to before wiping clean. Wash in lukewarm soapy water.
And dry with a microfibre cloth at the end. It is recommended to wash after every use
especially after roasting and grilling to avoid, stubborn build-up of grease and fats. If stains
are dicult to remove use only non-caustic or abrasive specialised cleaning products.
2. Do not use metal scrapers or rough abrasive materials, as these may scratch the
class and potentially cause it to crack or shatter.
HOW TO REMOVE THE OVEN DOOR
For a more thorough clean, you can remove the oven door. Proceed as follows:
• Open the door fully;
• Lift up and turn the small levers situated on the two hinges;
• Grip the door on the two external sides, shut it slowly but not completely;
• Pull the door towards you, pulling it out of its seat;
• Reassemble the door by following the above procedures backwards.
D A NIELA
DAN90ASO
P | 0 2 9 6 04 1 2 2 6 E | s a l e [e-mail] . au | W d a n ielaappliances.com . a u
Pg 19

P I 02 9604 1226 E I [e-mail] W | danielaappliances.com.au
PAGE 20
NOTICE!!
THE INNER GLASS IS NOT REMOVABLE
Replacing the Lamp in the Oven
• Unplug your oven!
• Wear rubber gloves when replacing the bulb
• Disconnect the oven from the power supply by means of
the omni polar switch used to connect the appliance to
theelectrical mains; or unplug the appliance if the
plug is accessible.
• Unscrew the glass cover attached to the lamp holder;
following characteristics:
- Voltage: AC220V-240V
- Wattage: 15W
- Socket: E 14
• Remount the glass cover and reconnect the
appliance to the power supply.
WARNING!!
Ensure that the appliance is unplugged before replacing the lamp to avoid the possibility of
electric shock.
D A NIELA
DAN90ASO
P | 0 2 9 6 04 1 2 2 6 E | s a l e [e-mail] . au | W d a n ielaappliances.com . a u
Pg 20