Data Video DAC-60 User manual

DAC-60
HD/SD-SDI TO VGA
CONVERTER
Quick Start Guide
www.datavideo.com

2
Warranty
Standard Warranty
Datavideo equipment is guaranteed against any manufacturing defects
for one year from the date of purchase.
The original purchase invoice or other documentary evidence should
be supplied at the time of any request for repair under warranty.
Damage caused by accident, misuse, unauthorized repairs, sand, grit
or water is not covered by this warranty.
All mail or transportation costs including insurance are at the expense
of the owner.
All other claims of any nature are not covered.
Cables & batteries are not covered under warranty.
Warranty only valid within the country or region of purchase.
Your statutory rights are not affected.
Two Year Warranty
All Datavideo products purchased after 01-Oct.-2008 qualify for a free
one year extension to the standard Warranty, providing the product is
registered with Datavideo within 30 days of purchase. For information
on how to register please visit www.datavideo-tek.com or contact your
local Datavideo office or authorized Distributors
Certain parts with limited lifetime expectancy such as LCD Panels,
DVD Drives, Hard Drives are only covered for the first 10,000 hours, or
1 year (whichever comes first).
Any second year warranty claims must be made to your local Datavideo
office or one of its authorized Distributors before the extended warranty
expires.
Disposal
For EU Customers only - WEEE Marking
This symbol on the product indicates that it will not be
treated as household waste. It must be handed over to
the applicable take back scheme for the recycling of
electrical and electronic equipment. For more detailed
information about the recycling of this product, please
contact your local Datavideo office.

3
Packing List
1 x DAC-60
1 x Switching Adaptor 12V/500mA
1 x DAC-60 Quick Start Guide
1 x User Adjust Tool CD
Front Panel
HD/SD - SDI IN / OUT
HD/SD - SDI input and pass-through output connectors.
Power Switch
Switches the power On / Off.
DC In Socket
Connects the supplied 12V PSU to this socket. The
connection can be secured by screwing the outer
fastening ring of the DC In plug to the socket.
USB
Upgrades Firmware/ Control Box by PC

4
Rear Panel
VGA Output
Connects your VGA equipment to this connector
LED
The LEDs indicate VGA output format
Mode Select
Selects VGA Output Format
Press and hold down this button for 3 second into TV
SCREEN MODE, and then press this button again to
switch screen ratio mode.
Note: OPTIMAL RATIO = 16:9 mode

5
DAC-60 has Full Screen, Dot by Dot and Optimal Ratio
3 kind aspect ratio modes (Mini Switch).
Source = 1920x1080 (16:9)
1. Full Screen Mode
Source = 1920x1080 (16:9)
Output = 800x600 (4:3)

6
2. Dot by Dot Mode
A. Source = 1920 x 1080 (16:9)
Output = 800 x 600 (4:3)
B. Source = 720 x 480i 60
Output = 800 x 600 (4:3)

7
3. Optimal Ratio Mode
Source = 1920 x 1080 (16:9)
Output = 800 x 600 (4:3)

8
DAC-60 installation
1. First make sure your equipment is not connected to power or disconnect
all power connectors before connecting the video equipment.
2. Connect Video Source (SDI) to the BNC input connector.
3. Connect VGA equipment to the VGA connector.
4. Connect optional SDI equipment to the BNC output connector.
5. Connect the +12V DC power adapter to the converter.
LED Indication
DAC-60 can work with six presets, which can be selected by pressing the
menu button.
LED Indication Resolution
●○○
○○○
800x600 60Hz
○●○
○○○
1024x768 60Hz
○○●
○○○ 1280x1024
60Hz
○○○
●○○ 1366x768
60Hz
○○○
○●○ 1400x1050
60Hz
○○○
○○● 1600x1200
60Hz
●- LED ON ○- LED OFF

9
Firmware Upgrade
Firmware is upgradable in the field using the integrated USB port
Step 1- open upload firmware program tools.exe, connect box to PC
by USB cable and turn off power
Step 2 - turn on power

10
Step 3 - turn off than turn on power and select firmware
Step 4 - push start button to update the firmware
Step 5 - close upload firmware program tools