Data Video PD-6 User manual

PD-6
CAMERA POWER
CENTER
Instruction Manual

1
Table of Contents
CAUTION: ...................................................................................................................................................................................2
WARNING:..................................................................................................................................................................................2
DANGER: ....................................................................................................................................................................................3
ATTENTION:................................................................................................................................................................................3
AVERTISSEMENT:........................................................................................................................................................................4
DANGER: ....................................................................................................................................................................................4
SAFETY INSTRUCTIONS - RACK MOUNT ......................................................................................................................................5
FCC COMPLIANCE STATEMENT....................................................................................................................................................6
WARRANTY ................................................................................................................................................................................6
STANDARD WARRANTY .........................................................................................................................................................................6
THREE YEAR WARRANTY .......................................................................................................................................................................6
DISPOSAL....................................................................................................................................................................................7
INTRODUCTION ..........................................................................................................................................................................8
FEATURES...........................................................................................................................................................................................8
FRONT PANEL .............................................................................................................................................................................8
SPECIFICATION............................................................................................................................................................................9
NOTE ........................................................................................................................................................................................10
SERVICE & SUPPORT................................................................................................................................................................. 12
Disclaimer of Product & Services
The information offered in this instruction manual is intended as a guide only. At all times, Datavideo
Technologies will try to give correct, complete and suitable information. However, Datavideo Technologies
cannot exclude that some information in this manual, from time to time, may not be correct or may be
incomplete. This manual may contain typing errors, omissions or incorrect information. Datavideo
Technologies always recommend that you double check the information in this document for accuracy
before making any purchase decision or using the product. Datavideo Technologies is not responsible for
any omissions or errors, or for any subsequent loss or damage caused by using the information contained
within this manual. Further advice on the content of this manual or on the product can be obtained by
contacting your local Datavideo Office or dealer.

2
CAUTION:
1. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
2. Do not use this unit in or near water.
3. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage.
4. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will be
walked on, rolled over, or otherwise stressed.
5. Unplug this product from the wall outlet and refer to qualified service personnel under the following
conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal operating conditions. Adjust only
those controls that are covered by the operating instructions in this manual; improper adjustment
of other controls may result in damage to the unit and may often require extensive work by a
qualified technician to restore the unit to normal operation;
e. When the product has been dropped or the cabinet has been damaged;
f. When the product exhibits a distinct change in performance, indicating a need for service.
WARNING:
1. Read all of these warnings and save them for later reference.
2. Follow all warnings and instructions marked on this unit.
3. This product should only be operated from the type of power source indicated on the marking label of
the AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your
local power company.
4. If an extension cord must be used with this unit, make sure that the total of the ampere ratings on the
products plugged into the extension cord do not exceed the extension cord’s rating.
5. Make sure that the total amperes of all the units that are plugged into a single wall outlet do not
exceed 15 amperes.

3
DANGER:
1. Slots and openings on the cabinet top, back, and bottom are provided for ventilation. To ensure safe
and reliable operation of this unit, and to protect it from overheating, do not block or cover these
openings. Do not place this unit on a bed, sofa, rug, or similar surface, as the ventilation openings on
the bottom of the cabinet will be blocked. This unit should never be placed near or over a heat register
or radiator. This unit should not be placed in a built-in installation unless proper ventilation is provided.
2. Never push objects of any kind into this unit through the cabinet ventilation slots, as they may touch
dangerous voltage points or short out parts that could result in risk of fire or electric shock. Never spill
liquid of any kind onto or into this unit.
3. Except as specifically explained elsewhere in this manual, do not attempt to service this product
yourself. Opening or removing covers that are marked “Do Not Remove” may expose you to dangerous
voltage points or other risks, and will void your warranty. Refer all service issues to qualified service
personnel.
ATTENTION:
1. Débranchez l'appareil de la prise secteur murale avant de le nettoyer . Ne pas utiliser de nettoyants
liquides ou en aérosol. Utilisez un chiffon humide pour le nettoyage.
2. Ne pas utiliser cet appareil dans l'eau ou près de l’eau.
3. Ne placez pas cet appareil sur un chariot, un support ou une table instables . L'appareil pourrait tomber,
causant de graves dommages.
4. Ne laissez rien reposer sur le cordon d'alimentation . Ne placez pas le cordon d'alimentation à un
endroit où quelqu’un ou quelque chose pourrait marcher, rouler dessus, ou l’abimer autrement.
5. Débranchez l'appareil de la prise secteur murale et reportez-vous à du personnel qualifié dans les
conditions suivantes :
a. Lorsque le cordon d’alimentation est endommagé ou effiloché ;
b. Lorsque du liquide a été renversé dans l'appareil ;
c. Lorsque le produit a été exposé à la pluie ou à l'eau ;
d. Quand l'appareil ne fonctionne pas normalement dans les conditions normales de
fonctionnement. Réglez seulement les contrôles qui sont couverts par les instructions de
fonctionnement dans ce manuel ; le réglage incorrect d'autres commandes peut causer des
dommages à l'appareil et peut souvent nécessiter l'intervention d’un technicien qualifié pour
restaurer l'unité en fonctionnement normal ;
e. Lorsque le produit est tombé ou que le boîtier a été endommagé ;
f. Lorsque le produit présente un changement notable de ses performances, indiquant qu'une
réparation est nécessaire.

4
AVERTISSEMENT:
1. Lire tous ces avertissements et les conserver pour référence ultérieure.
2. Respectez tous les avertissements et instructions indiqués sur cet appareil.
3. Ce produit ne doit être utilisé qu’avec le type de source d'alimentation indiqué sur l'étiquette de
l'adaptateur secteur (AC) . Si vous n'êtes pas sûr du type d'alimentation disponible, consultez votre
revendeur Datavideo ou votre fournisseur d'électricité local.
4. Si une rallonge doit être utilisée avec cet appareil , assurez-vous que le total des intensités nominales
des produits branchés sur la rallonge ne dépasse pas la cote de la rallonge (Ampères).
5. Assurez-vous que les Ampères totaux de toutes les unités qui sont branchées sur une même prise
secteur murale ne dépasse pas 15 ampères.
DANGER:
1. Les fentes et les ouvertures sur le haut du boitier , l’arrière et le bas, sont prévues pour la ventilation .
Pour assurer un fonctionnement sûr et fiable de cette unité, et pour la protéger de la surchauffe, ne
bloquez ou ne couvrez pas ces ouvertures. Ne placez pas cet appareil sur un lit, un canapé, un tapis ou
une surface similaire, car les ouvertures de ventilation sur le fond du boitier seront bloquées. Cette
unité ne doit jamais être placée à proximité ou sur une source de chaleur ou un radiateur. Cet appareil
ne doit pas être placé dans une installation intégrée à moins qu'une ventilation adéquate ne soit
prévue.
2. Ne jamais pousser des objets de toute sorte dans cette unité à travers les fentes de ventilation du
boitier , car ils peuvent toucher des points de tension dangereux ou court-circuiter, ce qui pourrait
entraîner un risque d'incendie ou de choc électrique . Ne renversez jamais de liquide d'aucune sorte sur
ou dans l'appareil.
3. Sauf disposition expresse expliquée ailleurs dans ce manuel , ne tentez pas de réparer ce produit vous-
même. L'ouverture ou le retrait des capots portant la mention «Ne pas retirer» peut vous exposer à des
points de tension dangereux ou d'autres risques, et annulera votre garantie. Reportez tous les
problèmes de service à un personnel qualifié.

5
Safety Instructions - Rack Mount
Marking or Instruction Details:
"Rack Mount Instructions - The following or similar rack-mount instructions are included with the
installation instructions:
A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient
temperature of the rack environment may be greater than room ambient. Therefore, consideration should
be given to installing the equipment in an environment
compatible with the maximum ambient temperature (Tma) specified by the manufacturer.
B) Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow
required for safe operation of the equipment is not compromised.
C) Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition
is not achieved due to uneven mechanical loading.
D) Circuit Overloading - Consideration should be given to the connection of the equipment to the supply
circuit and the effect that overloading of the circuits might have on overcurrent protection and supply
wiring. Appropriate consideration of equipment nameplate
ratings should be used when addressing this concern.
E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to the branch circuit
(e.g.use of power strips)."
" Instructions de montage en Rack - Les instructions de montage en rack suivantes ou similaires sont
incluses dans les instructions d'installation :
A) Température ambiante de fonctionnement - S'il est installé dans un rack fermé ou à unités multiples , la
température ambiante de fonctionnement du rack peut être supérieure à la température ambiante de la
pièce . Par conséquent , il faut envisager d'installer l'équipement dans un environnement compatible avec
la température ambiante maximale ( Tam), spécifiée par le fabricant .
B ) Débit d'air réduit – L’installation de l'équipement dans un rack doit être telle que la quantité de flux
d'air nécessaire au bon fonctionnement de l'équipement ne soit pas compromise.
C ) Charge mécanique - Le montage de l'équipement dans le rack doit être tel qu'une situation dangereuse
ne soit pas liée à une charge mécanique irrégulière .
D ) Surcharge du circuit d’alimentation- Il faut tenir compte de la connexion de l'équipement au circuit
d'alimentation et l' effet que la surcharge des circuits pourrait avoir sur la protection contre les
surintensités et les câbles d'alimentation . Un examen approprié des notes des équipements et de la plaque
signalétique doit être fait pour traiter cette préoccupation .
E ) Mise à la terre fiable – La mise à la terre fiable du matériel monté en rack doit être maintenue . Une
attention particulière doit être apportée aux connexions d'alimentation autres que les connexions directes
au circuit.(par exemple l'utilisation de multiprises ) " .

6
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
Warranty
Standard Warranty
•Datavideo equipment are guaranteed against any manufacturing defects for one year from the date
of purchase.
•The original purchase invoice or other documentary evidence should be supplied at the time of any
request for repair under warranty.
•The product warranty period begins on the purchase date. If the purchase date is unknown, the
product warranty period begins on the thirtieth day after shipment from a Datavideo office.
•All non-Datavideo manufactured products (product without Datavideo logo) have only one year
warranty from the date of purchase.
•Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered under
warranty.
•Viruses and malware infections on the computer systems are not covered under warranty.
•Any errors that are caused by unauthorized third-party software installations, which are not
required by our computer systems, are not covered under warranty.
•All mail or transportation costs including insurance are at the expense of the owner.
•All other claims of any nature are not covered.
•All accessories including headphones, cables, and batteries are not covered under warranty.
•Warranty only valid in the country or region of purchase.
•Your statutory rights are not affected.
Three Year Warranty
•All Datavideo products purchased after July 1st, 2017 are qualified for a free two
years extension to the standard warranty, providing the product is registered
with Datavideo within 30 days of purchase.
•Certain parts with limited lifetime expectancy such as LCD panels, DVD drives,
Hard Drive, Solid State Drive, SD Card, USB Thumb Drive, Lighting, Camera module, PCIe Card are
covered for 1 year.
•The three-year warranty must be registered on Datavideo's official website or with your local
Datavideo office or one of its authorized distributors within 30 days of purchase.

7
Disposal
For EU Customers only - WEEE Marking
This symbol on the product or on its packaging indicates that this product must not be
disposed of with your other household waste. Instead, it is your responsibility to
dispose of your waste equipment by handing it over to a designated collection point for
the recycling of waste electrical and electronic equipment. The separate collection and
recycling of your waste equipment at the time of disposal will help to conserve natural
resources and ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste equipment for recycling,
please contact your local city office, your household waste disposal service or the shop where you
purchased the product.
CE Marking is the symbol as shown on the left of this page. The letters "CE" are the
abbreviation of French phrase "Conformité Européene" which literally means
"European Conformity". The term initially used was "EC Mark" and it was officially
replaced by "CE Marking" in the Directive 93/68/EEC in 1993. "CE Marking" is now used
in all EU official documents.

8
Introduction
PD-6 is a 19" rack mountable universal AC to DC Power Distribution Center, designed to supply steady and
sequenced voltage for production kit whilst on location or in your studio.
Perfect for use in conjunction with Datavideo studio equipment and the CB-22H / CB-23H via a single
power cable. Each of the eight outputs can be configured individually, DC48V, 24V, 14.4V & 12V, with a
total power consumption of 360W.
Features
•Automatically adjusts to work with 50Hz or 60Hz supplies between 100-240 VAC
•8 DC outputs with a combined total power consumption of 360W
•Each DC output can be switched to provide 12, 14.4, 24 or 48v
•Each DC output has a multi-colour LED confirming the chosen voltage by colour
•The unit is designed to provide both DC & AC overload protection
•Compatible with CB-22H, CB-23H, DDC-4012H en VP-605H. Please note that the “non-H” versions
of these accessories are NOT meant to be used on the PD-6. Refer to FAQ for more information.
•Standard 19" - 1U rack mountable case
Front Panel
On / Off Switch
Powers the PD-6 On / Off when using AC Power.
AC In with built-in fuse
AC Inlet for connecting to suitable mains power outlet – 100-
240VAC. The
socket contains a fuse holder with a 6.3A/250V fuse.
DC Output
8 DC outputs with a combined total power consumption of 360 Watts.
Each DC output can be switched to provide either 12, 14.4, 24 or 48 Volts.
DC Outputs x 8
AC Input
100~240VAC
Power Switch

9
Specification
AC Input
Voltage Range 100~240 VAC
AC frequency 50Hz or 60Hz
Fuse Rating 6.3A/250VAC
Efficiency (Typ.) UP TO 80%
DC Output
DC Voltage 12V、14.4V、24V、48V
Voltage Tolerance ±3%
Rated Power(Max) 4 channels for 30W ; 4 channels for 60W
Protection DC Overload
105%~150% rated output power
Protection type: Recovery automatically after fault condition is
removed
AC Overload
non-recovery fuse on the AC input outlet
Connector
On/Off Switch Powers the PD-6 On / Off
Light switch indicator
AC In outlet
with built-in fuse
AC Inlet for connecting to suitable mains power outlet – 100-
240VAC. The socket contains a fuse holder fitted with a 6.3A
/250V fuse.
4PIN XLR Female 8 Groups DC OUTPUT：
(PIN1:GND , PIN2:VCC, PIN3/4 :NC)
Slide Switch
8 Groups Switch：
There are four options for each group：
12V、14.4V、24V、48V DC output
Environment
Working Temp 0°C to 40°C (32°F to 102°F)
Working Humidity 10% to 90% (non condensing)
Storage
Temp. Humidity
-40°C to +85°C, 10~95% RH
Others
Cooling Fan
Has four built-in cooling fans, please ensure that these are not
blocked, and that some airflow is available.
N.B. Internal ambient temperature of about 50
℃
fan starts.
(2 fans at middle and 1 fan at rightmost)
N.B. Internal ambient temperature of about 70
℃
fan starts.
(1 fan closes to the Ground terminal)
DC Output LED
Indicator
LED Color Indicator
Red:48V / light Red:24V / Green:14.4V / Blue:12V
Dimension
440 mm x 235 mm x 46 mm (L x W x H)
Weight
Approx. 5.2 kg/ 11.5 lbs
Ground Terminal
When connecting this unit to any other component, make sure
that it is properly grounded by connecting this terminal to an
appropriate point. When connecting, use the socket and be sure
to use wire with a cross-sectional area of at least 1.0 mm
2
.

10
NOTE

DATAVIDEO WORLDWIDE OFFICES
Tel: [phone]
Fax:[phone]
E-mail:[email protected]E-mail: [email protected]
China Shanghai
Datavideo Technologies China Co
601,Building 10,No.1228,
Rd.Jiangchang,
Jingan District,Shanghai
Tel: [phone]
Fax:[phone]
E-mail:[e-mail]
Singapore
Datavideo Visual Technology(S) Pte Ltd
No. 178 Paya Lebar Road #06-07
Singapore 409030
Tel: [phone]
Fax:[phone]
E-mail:[email protected]
Singapore
Datavideo Technologies Co. Ltd
10F. No. 176, Jian 1st Rd.,Chung Ho
District, New Taipei City 235, Taiwan
Tel: [phone]
Fax:[phone]
E-mail:[e-mail]
Taiwan
Datavideo Corporation
7048 Elmer Avenue.
Whittier, CA 90602,
U.S.A.
United States
Datavideo UK Limited
Brookfield House, Brookfield Industrial
Estate, Peakdale Road, Glossop,
Derbyshire, SK13 6LQ
Tel: [phone]
Fax:[phone]
E-mail:[e-mail]
United Kingdom
Datavideo Technologies China Co
902, No. 1 business building,
Xiangtai Square, No. 129,
Yingxiongshan Road, Shizhong District,
Jinan City, Shandong Province, China
Tel: [phone]
E-mail:[e-mail]
China Jinan
Datavideo France s.a.r.l.
Cité Descartes 1, rue Albert Einstein
Champs sur Marne 774477 –
Marne la Vallée cedex 2
Tel: [phone]
Fax:[phone]
E-mail:[email protected]
France
Datavideo Hong Kong Ltd
G/F.,26 Cross Lane
Wanchai, Hong Kong
Tel: [phone]
Fax:[phone]
E-mail:[email protected]k
Hong Kong
Datavideo India Noida
Fax:[phone]
E-mail: [email protected]
Tel: [phone]
A-132, Sec-63,Noida-201307,
India
India Noida
Datavideo India Kochi
Tel: [phone]
Fax:[phone]
2nd Floor- North Wing, Govardhan Building,
Opp. NCC Group Headquaters, Chittoor Road,
Cochin- 682035
India Kochi
Datavideo Technologies Europe BV
Floridadreef 106
3565 AM Utrecht,
The Netherlands
Tel: [phone]
Fax:[phone]
E-mail:[e-mail]
Netherlands
China Beijing
Datavideo Technologies China Co
No. 812, Building B, Wankai Center,
No.316, Wan Feng Road, Fengtai District,
Beijing, China
Tel: [phone]
Fax:[phone]
E-mail:[e-mail]
Datavideo Technologies China Co
A1-2318-19 Room,No.8, Aojiang Road,
Taijiang District,Fuzhou,Fujian,China
Tel: [phone]
Fax:[phone]
E-mail:[e-mail]
China Fuzhou
Datavideo Technologies China Co
B-823,Meinian square,No.1388,
Middle of Tianfu Avenue,Gaoxin District,
Chengdu,Sichuan
Tel: [phone]
Fax:[phone]
E-mail:[e-mail]
China Chengdu
Datavideo Technologies (S) PTE Ltd
No. 178 Paya Lebar Road #06-03
Singapore 409030
Tel: [phone]
Fax:[phone]
E-mail:[email protected]g
It is our goal to make owning and using Datavideo products a satisfying experience. Our support sta󰀨 is available
to assist you to set up and operate your system. Contact your local office for specific support requests. Plus,
please visit www.datavideo.com to access our FAQ section.
All the trademarks are the properties of their respective owners. Datavideo Technologies Co., Ltd. All rights reserved 2018
Jan-29.2018
Version : E2
Service & Support
Please visit our website for latest manual update.
www.datavideo.com/product/PD-6