Datacom Datacom dt-103 User manual

DEAR CONSUMER

GREAT APPRECIATION FOR PURCHASING OUR PRODUCT; TO SECURE

THE BEST PERFORMANCE AND THE HIGHEST SAFETY, PLEASE READ

THE FOLLOWING EXPLANATION CAREFULLY

PLEASE READ THIS MANUAL WITH SUFFICIENT CAREFULNESS AND

PATIENCE PRECEDE THE CONNECTION AND INSTALLATION

DATACOM DT-103

CONTENT

Safety Instruction................................................................................................................................ 1

Front Panel ......................................................................................................................................... 2

Rear Panel.......................................................................................................................................... 2

Remote controller ............................................................................................................................... 3

System Connection ............................................................................................................................ 5

Power On............................................................................................................................................ 5

Menu Tree........................................................................................................................................... 6

Installation........................................................................................................................................... 7

User Setup........................................................................................................................................ 10

Edit ................................................................................................................................................... 11

Lock setup ........................................................................................................................................ 15

Advanced setting.............................................................................................................................. 16

Timer................................................................................................................................................. 17

Game ................................................................................................................................................ 17

TEL.................................................................................................................................................... 18

Feature..............................................................................................................................................18

Terms ..............................................................................................................................................19

Specification...................................................................................................................................20

SAFETY INSTRUCTION

 Please read the following instructions carefully

 Do not overload the following wall outlets, extension cords or integral convenience receptacles as this can

resultin a risk of fire or an electrical shock

 Never allow liquids, spraysor other materialto be exposed with theinside of the STB



Unplug the STBfrom thewalloutlet before cleaning and use the soft cloth to clean the exterior

of the STB

 The LNB cable must be earthed to the system that earthing for the satellite antenna

 The parameter of using power source should be squared with which indicating on its rear panel, otherwise,

the machine will work improperly and even be ruined

 To maintain the suitable antenna installation position, the proper antenna installation angle, the adequate

antenna earthing, the normal antenna anti-interference measure; Keep the earthing of the outdoor

antenna separating with the indoor equipment’s



Do not place the STBwhere it is exposed to sunlight directly or near a heater



Never stack other electronic equipment on top of the STB

 Place the STBindoor properly to prevent lightening, raining and direct sunlight



Thelocation where connecting withthe connectorplug of this machineshouldbe served as the

disconnect device, and should be maintained on the state of power-supplying always

 Protect thepower line frombeing walked on or being squeezed particularly on plugs,convenience

receptacles (jack),and the spot where they exitfrom the apparatus



Unplug this apparatus during lightning storms or when unused for long periods

 Referallservicing toqualifiedservice personnel.Service isrequired when the machine has been

damaged in any case,such as power-supplycord or plug is damaged,liquidhas been dropped into or

objects have fallen into the interior,the machine has been exposed to rain or moisture, does not

perform malfunctioning,or has been droppedon the ground,or othersituationsabnormally etc



Warning:This unitshould only be maintainedby the authorized and the regular trained technician; Opening

the cover or other attempts by the userto service this unitcan lead serious injury or person-death from

electrical shock,and can increase the possibility of risk of fire

 The naked flame sources, such as the lighting candles, shouldn't be placed on the apparatus

 Donot use any attachment that are not recommendedasthese may cause hazards or damage the

equipment

Note: All the OSD and illustrations in this manual may be somewhat different from the actual situation

 Please take the digital receiver as the standard

FRONT PANEL

1. Card slot (spare)

2. AUDIO: to choose audio channel

3. MENU: Menu entry/ exit button

4. OK: menu confirmation/ channel list

5. Remote sensor/ status indicator

LED-displaying window

REAR PANEL

1. Power switch

2. Satellite signal output terminal

3. Satellite signal input terminal

4. Serial data interface (option)

5. Video signal output terminal

6. Standby switch

7. Volume adjusting decrease/ key leftwards

8. Channel turning forwards/ key upwards

9. Volume adjusting increase/ key rightwards

10. Channel turning backwards/ key downwards

udio signal output terminal(R/L)

7. TV Scart (option)

8. RF signal input terminal

9. RF si

nal out

ut terminal

REMOTE CONTROLLER KEYS

Advice operates each function of the STB by using the button on the remote controller. Please read this

section to help advance your understanding of the function of the STB

Menu mode: to move cursor upwards/ downwards

Non-menu: to turn the channel forwards or backwards

Menu mode: to select or adjust the parameter

Non-menu: volume decrease/increase

Non-menu: to show satellite list

Non-menu: to select the favorite installed channel

To instruct the unit to enter the standby mode

Non-menu: to mute the audio output

To return to the non-menu (program-enjoying) mode

To enter the Main Menu interface or return to the last grade interface

Non-menu: to choose the channel

To show the Select Satellite interface

Non-menu: Punch once, punch +/-, Ÿ/źto move the selecting area, punch

the OK key to magnify the area and punch the key once more to recover to the

normal

Non-menu: to show the EPG Infor

Non-menu: to show the image’s brightness, contrast and color

Non-menu: to select the audio channel

PRECAUTIONS ABOUT BATTERIES

Non-menu: to switch the channel mode between TV and Radio

Non-menu: to show the stored channel list, menu mode: to confirm the

operation

Non-menu: to switch the channel between the present and the last

Non-menu: to enter the timer editing function

Non-menu: to show the present channel’s information

Non-menu: to enter Game interface for entertainment

Non-menu: to switch the state of scene between activity and inactivity

Improper use of batteries may cause corrosion or fluid leakage. Please observe the following

instructions for the safe use of batteries

1. Do not mistake the polarities of batteries

2. Never leave dead batteries in the remote control

3. Remove batteries from the remote controller it is not going to be used for a certain time

4. Do not attempt to disassemble, short-circuit, heat, recharge or throw the batteries into the fire

source

5. Do not use new batteries and old one together, or which is different type

6. Wipe away any electrolyte fluid inside the remote controller, and insert new batteries

PREPARATION OF REMOTE CONTROLLER

OPERATION SCOPE OF THE REMOTE CONTROLLER



USEFUL PROMPT

 To prolong the useful life of this machine, the interval of the continuous switch action must be

above one minute

 The parameter of using power source should be squared with which indicated on the rear panel,

or the machine will work improperly and even be ruined

 When the picture that the unexpected non-respondency happening, please turn on the machine

again

 To maintain the suitable antenna installation position, proper antenna installation angle,

adequate antenna earthing, the normal antenna anti-interference measure; and should keep the

earthing of the outdoor antenna separating with the indoor equipment’s

Load the batteries to the groove of the remote

controller and then enable you to operate the native

1. Open the lid

 Load the batteries (AAA type) and attend

whether the anode and cathode of battery

are corresponding to the polarity indicated

on the remote controller

 Close the lid

Make the controller toward the inductive window o

native and then punch the keys

1. Distance: about seven meters in front o

the inductive window

ngle: about 30 degree right or left refe

to the frontispiece of the native’s fron

anel

INDUCTIVE WINDOW OF FRONT PANEL

SYSTEM CONNECTION

 Connect the AUDIO, VIDEO, and TV Scart output terminals with the corresponding terminals of

the TV set

 Adjust the direction of the dish according to the antenna signal level displaying on the screen

 Connect the Fterminal to both ends of the cable, one end to the LNB terminal of satellite

antenna and the other end to “SAT IN” input terminal of this unit

 Please make sure that the Fterminals are connected well

 The Serial data interface is used to upgrade the software or to enrich the date bank of the

machine via the manner of pc to pc or box to box

 Do not tie the cable line with the power line in case influencing the reception

POWER ON

Plug the machine and punch its power switch to keep the “ON” status, the unit enters its normal

mode

Punch the standby key on the remote controller to the remote receiving window of the machine or

the key on the set, which enters its standby mode and the “standby” character appears on the

screen for seconds. Re-punch the key; the unit recovers to its normal

If the channel has been locked, the lock indicator lights up

MENU TREE

INSTALLATION

Punch the MENU key on the program-enjoying mode and

the image shows as

Move the cursor onto the Installation menu tape and

punch the OK key, the image shows as:

Punch the OK key to enter the lighting satellite name and

the interface shows its transponders as:

Punch the red key and Ʒkey to select the transponder

or the transponders and then scan, punch the blue key to

scan the channels in the Satellite interface (next page)

Punch the yellow key to delete the lighting transponder

tape

Punch the blue key to enter the Satellite menu interface

(next page):

Punch the MENU key to return to the Select Satellite

interface, punch the red key and Ʒkey to select one

or more the satellites and punch the blue key to enter the

Satellite interface ( right side) to scan the chosen satellite

or satellites

Move the cursor onto the Satellite tape, punch the +/- key

to select the selecting satellite (note: only two or more the

satellites in Select Satellite interface have been selected,

this item has the selectivity) name which above-mentioned

Move the cursor onto the LNB type tape, therein, eight

types, punch the +/- key to select the suitable one or,

punch the OK key to enter the LNB setting interface, the

image as:

Light the LNB index (1.8) to choose one type name (for

example, Type 1 is as indication)

Light the LNB Freq. Low and LNB Freq. High menu tape,

punch the +/- key to install the parameter by referring to

the frequency value of tuner on the antenna or the

digit-keys to input the digits directly, finish installing, force

down the OK key to save the installation

Light the DiSEqC tape to select the port through pressing

the +/- key; the DiSEqC parameter of the port must be

consistent with the actual input terminal of the present

satellite antenna

Attention:

LNB Power: Single machine situation: keep the status on

the “on”

Loop situation: keep the status of the

machine which connecting the satellite signal

on the “on” and others on the “off”

Punch the MENU key to return the interface to the Satellite

one as above, light the TP Freq., punch the +/- key to

choose the suitable parameter of TP Freq.,TP Polar,TP

SR or, punch the digit-keys to input the correct value

which what we according to are either Quality or Level

tapes show together a certain length and whether the lock

indicator lights up simultaneously.

Light the sixth tape; punch the +/- key to switch the status

between “on” and “off”, punch the OK key to enter the

motor interface when the “on” status is being chosen and

the interface shows as

Light the seventh instruction tape; punch the OK key to

reveal a inquire window with a sentence “ARE YOU

SURE?” Use pressing the red key to confirm and the

green one to give up

Light the fourth instruction tape to punch the +/- key to

choose one of the three instructions: Off, West, and East.

Punch the OK key to confirm. Therein:

1. West: to limit the westward limit of the

dish-adjustment

2. East: to limit the eastward limit of the dish-adjustment

3. Off: to give up the limitation set

Light the Position auto,Move dish,Step move; the

functions of these three instructions are to adjust the

direction of dish, hereinto:

1. Position auto: the drive instruction will not be

stopped until to punch the OK key

2. Move dish: to drive the dish to adjust a relative

biggish range

3. Step move instruction is to modify a relative minor

range

What we according to of adjustment is the Quality tape

show its longest length, in which:

=>E: to drive the dish to the east direction

=>W: to drive the dish to the west direction

=>Stop: to stop the adjustment

After adjustment˖

1. Light the fifth instruction tape Store position, force

down the digit-keys to input the adjusted situation

(position) code and then punch the OK key to save

the code

2. Light the sixth instruction tape Goto position, use

input the code digit to drive the dish to the situation

where has saved

The function of eighth instruction tape Recalculate

position is to send an instruction to the motor, and

calculate the suitable situation by itself

Punch the MENU key to return to the Satellite interface to

start the scan, there four modes to search the satellite

channels, they are: Auto,TP,FTA and NIT. In which:

Auto: to scan all the channels in the selecting satellite

name.

TP: to scan the channels which in the choosing

transponder

FTA: to scan the channels, which are, belong to the free to

air

NIT: to scan the channels, which are, belong to the network

For example: punch the blue key to search the net

channels and the image shows as:

Finish scanning, if the channel has been searched then the

machine will auto-save all the scanned channels and turn

the image to the program-enjoying mode, or, return to the

Select Satellite interface

USER SETUP

Force down the MENU key on program-enjoying mode,

light and then punch the User Setup tape, the image

shows:

Light the Language Setting tape and punch the OK key to

enter its sub-menu, the picture shows

Language Setting: punch the +/- key to select the

appropriate language. Therein, Audio Language: what

language is being chosen means which is owning the

strongest priority in broadcasting. The function rest with the

support of satellite service

LANGUAGE SETTING

Light the Local Time Setting and enters its sub-menu:

GMT: the Greenwich Meantime

Selected time zone: to choose the appropriate location

Summer time: daylight saving time

Time offset: to modify the time

What the Current Time appears is the synchro-time which

is sent by the satellite signal

Light the A/V Output Setting tape and enters

Aspect: use the +/- key to select the window style (4:3;

16:9)

Delay Time: use the +/- key to select 2-7second, always

etc.; the magnitude of value decide the length of time of

channel info tape staying on the screen when switching the

channel

Always: the instruction means the info tape will stay on the

screen until punch the EXIT key when switching

Transparency: use the +/- key to modify the value and the

magnitude of it decides the transparency degree of menu

Light the About menu tape and punch the OK key to enter

its sub-menu, the interface shows the model and software

of the machine

EDIT

Return to the Main Menu interface then light the Edit tape

and force down, the image shows as:

LOCAL TIME SETTING

A/V OUTPUT SETTING

Light Edit TV Channel and enters its interface:

Punch the green key repeatedly to change the mode and

which will be shown on the yellow tape correspondingly,

the status includes: MOVE, FAVOR1-4, SORT, DELETE

1. Move: when the yellow tape shows the “move”

character, punch the yellow key, punch the Ʒ key

to move the channel name tape to the suitable location

and punch the yellow key once more to release.

2. Favor: when the yellow tape shows “favor1…favor4”

character, punch the yellow key and punch the Ʒ

key to add the “heart” symbol on the tail of channel

name tape, the symbol shows the channel has been

added in the present favor mode. The same operation in

turn to finish the rest of three favor modes

3. Delete: to remove the choosing channel name. Punch

the yellow key when the yellow tape shows the “delete”

word, the window with “YES” and “NO” appears, punch

the red key to delete or green key to give up

4. Sort: when the yellow tape shows the “sort” word,

punch the yellow key, the list which what we according

to sort the channels appears, punch the Ʒ key to

choose one suitable instruction to complete the sorting

Forces down the red key to switch the list mode between

TV and radio

Forces down the blue key to show the satellite name list

The same operation as above-mentioned

Return to the Edit interface and enter the Edit Satellite

interface the image shows:

Delete: punch the red key, the window with “YES” and

“NO” Instructions appears, force down the red key again to

delete the selecting satellite name and the green one to

give up

EDIT TV CHANNEL

EDIT RADIO CHANNEL

EDIT SATELLITE

Change: punch the yellow key, the picture shows:

Light the Satellite tape and punch the OK key to enter the

soft-keyboard interface:

Use the Ʒ, +/- key to move the cursor and the OK key

to confirm the input

Use CAPS instruction to switch the letter state between

capital and miniscule

Use NUM instruction to switch the mode from letter to digit

and special symbol

After inputting, move the cursor onto the Save instruction

and punch the OK key to save the installation

Light the TP frequency; punch the +/- key to choose the

appropriate stored transponder parameter of TP frequency,

LNB polarization,Symbol Rate that belong to the

selected satellite or, directly, punch the digit-keys to

complete the value input of TP frequency, LNB polarization,

Symbol Rate

Light the Channel Name menu tape; punch the +/- key to

choose the channel’s name which belong to the choosing

transponder, punch the OK key to appear the

soft-keyboard to rename the channel name which

operation just as above-mentioned about soft-keyboard

introduction. Light the Video PID, Audio PID, and PCR

instruction tape and punch the digit-keys to input the

correct value

Add: return to the Edit Satellite interface and punch the

blue key, the picture shows as:

Punch the OK key to reveal the soft-keyboard to define

the satellite name, finish the definition, input one-group

parameter of TP frequency,LNB polarization and

Symbol Rate, punch the OK key to save the installation

and the new satellite will be added meanwhile. Check the

added satellite in the Select Satellite menu interface pls

Return the interface to the Edit and light the

Edit

Transponder menu tape, the image shows

Delete: punch the Ʒ key to move the cursor upwards

or downwards, punch the red key and the window with

“YES” and “NO” appears, punch the red key to delete it

and the green one to exit

Punch the green key to add the “upward/ downward”

symbol on the end of the transponder parameter tape,

punch the Ʒ key to move the tape to the suitable

situation and release

Change: refer to the relative introduction segment of Edit

Satellite

Add: return to the Edit Transponder and force down the

blue key to enter the image:

Punch the digit-keys to finish the input of parameter of TP

frequency,LNB polarization,Symbol Rate, punch the

OK key to save the new added transponder and which can

be detected in the interface of Select Transponder of

Select Satellite

LOCK SETUP

Return the interface to the Main Menu, light the Lock

Setup menu tape and the image shows:

Light the Change PIN instruction tape and punch the OK

key to enter its interface

To realize creating one new private code by this instruction:

the default or primary code is “0000”. First, input the

correct current code and then the new one and verify it.

The verified code will become the current one and the

information window with “password changed!” phrase

flashing on the screen for seconds; the information window

shows the operation is successful

EDIT TRANSPONDER

Lock TV Channel:return the Lock Setup interface and

light the Lock TV Channel instruction, the image shows

Punch the OK key to enter its interface which is similar with

the Edit TV Channel, punch the Ʒ key to select the

channel and punch the yellow key to add one “lock”

symbol on the end of installing channel name tape. Just as

the right side image indicates. Punch the yellow key once

Popular Receiver manuals by other brands

Panasonic

Panasonic PressIT TY-SB01WP operating instructions

GAMA Electronics

GAMA Electronics LRF240V1PR instruction manual

Imperial

Imperial DABMAN 110 user manual

Phoenix Mecano

Phoenix Mecano Dewert Okin OKIMAT 4 quick guide

OTS

OTS ET1200CPp-RS4 quick start guide

AOR

AOR AR8200D operating manual

Denon

Denon AVR-2807 Control protocol

Sony

Sony STR-DH700 Quick setup guide

JVC

JVC KD-SHX751 Installation & connection manual

Sennheiser

Sennheiser EK 2000 manual

Sony

Sony HCD-RV777D Service manual

V2 WALLY-U manual

Taurus

Taurus 80 quick start guide

Tactic

Tactic TR324 owner's manual

Noraxon

Noraxon Ultium EMG System user manual

Williams AV

Williams AV PPA R38 user manual

Magnetek

Magnetek Enrange CAN-6 instruction manual

Pioneer

Pioneer MVH-MS510BT quick start guide

Datacom Datacom DT-103 User manual

Popular Receiver manuals by other brands