Datalogic Memor User manual

822001460 12/13
www.datalogic.com
© 2008-2013 Datalogic ADC S.r.l. All rights reserved.
Datalogic and the Datalogic logo are registered
trademarks of Datalogic S.p.A. In many countries,
including the U.S.A. and the E.U.
Datalogic Memor™
Mobile Computer
Via S. Vitalino, 13
40012 Lippo di Calderara di Reno
Bologna - Italy
Telephone: [phone]
Fax: [phone]
Datalogic ADC S.r.l.
User’s Manual

Datalogic ADC S.r.l.
Via S. Vitalino, 13
40012 Lippo di Calderara di Reno
Bologna - Italy
Telephone: [phone]
Fax: [phone]
©2008-2013 ADC S.r.l.
An Unpublished Work - All rights reserved. No part of the contents of this documentation or
the procedures described therein may be reproduced or transmitted in any form or by any
means without prior written permission of Datalogic ADC, Inc. or its subsidiaries or affiliates
("Datalogic" or “Datalogic ADC”). Owners of Datalogic products are hereby granted a non-
exclusive, revocable license to reproduce and transmit this documentation for the
purchaser's own internal business purposes. Purchaser shall not remove or alter any
proprietary notices, including copyright notices, contained in this documentation and shall
ensure that all notices appear on any reproductions of the documentation. Should future
revisions of this manual be published, you can acquire printed versions by contacting your
Datalogic representative. Electronic versions may either be downloadable from the Datalogic
website (www.datalogic.com) or provided on appropriate media. If you visit our website and
would like to make comments or suggestions about this or other Datalogic publications,
please let us know via the "Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is
complete and accurate, however, Datalogic reserves the right to change any specification at
any time without prior notice. Datalogic and the Datalogic logo are registered trademarks of
Datalogic S.p.A. in many countries, including the U.S.A. and the E.U.
Memor and the Memor logo are trademarks of Datalogic ADC S.r.l.
All other brand and product names may be trademarks of their respective owners.
Patents
This product is covered by one or more of the following patents.
Design Pat. Nos: EP 469,143; EP 1,582,024; AU 310182 S; CN 658612; HK 0601962.6; KR 30-
0466667; JP1325117; TW D118829; US D574,830 S.
US Pat. Nos: 5,992,740; 6,808,114 B1; 6,997,385 B2; 7,387,246 B2.
European Pat. Nos: 681,257 B1; 789,315 B1; 1,128,315 B1; 1,396,811 B1; 1,413,971 B1.
Additional patents pending.

iii
CONTENTS
REFERENCES ............................................................................................vi
Conventions..................................................................................................vi
Reference Documentation ............................................................................vi
Services and Support....................................................................................vi
GENERAL VIEW ........................................................................................ vii
1INTRODUCTION ..........................................................................................1
1.1 Datalogic Memor Description........................................................................1
1.2 Available Models...........................................................................................3
1.3 Package Contents.........................................................................................4
1.4 Inserting a MicroSD Card..............................................................................5
1.4.1 Removing the MicroSD Card ........................................................................7
1.5 Accessories...................................................................................................8
2BATTERIES AND MAINTENANCE .............................................................9
2.1 Charging the Battery Pack............................................................................9
2.2 Replacing the Battery Pack.........................................................................12
2.3 Cleaning the Mobile Computer....................................................................16
3CONNECTIONS .........................................................................................17
3.1 USB Connection .........................................................................................17
3.2 Connection to USB Peripherals ..................................................................19
3.3 RS232 Connection......................................................................................21
3.4 WLAN Connection ......................................................................................22
3.5 WPAN Connections ....................................................................................24
3.6 Connection Cables......................................................................................25
3.7 Wireless and Radio Frequencies Warnings................................................26
4USE AND FUNCTIONING..........................................................................28
4.1 Startup ........................................................................................................28
4.1.1 Using the Stylus..........................................................................................30
4.1.2 Using the Joystick....................................................................................... 31
4.1.3 Windows CE Touch Screen Calibration......................................................32
4.2 Data Capture...............................................................................................33
4.2.1 Laser Data Capture.....................................................................................34
4.2.2 Imager Data Capture...................................................................................35
4.3 Description of the Keyboards......................................................................37
4.3.1 Resetting the Datalogic Memor...................................................................40
4.4 Status Indicators.........................................................................................42
4.4.1 LED Status..................................................................................................42
4.4.2 Taskbar....................................................................................................... 43
4.5 Control Panel..............................................................................................44
4.5.1 Data Capture Configuration ........................................................................45

iv
4.5.2 Configure ....................................................................................................46
4.5.3 Capture....................................................................................................... 51
4.5.4 Buttons........................................................................................................52
4.5.5 Registry.......................................................................................................53
4.5.6 Files Admin.................................................................................................54
4.5.7 Wireless Communications...........................................................................57
4.5.8 Stylus Calibration........................................................................................58
4.5.9 Audio Settings.............................................................................................61
4.6 Connecting to other Computers..................................................................63
4.6.1 Windows Mobile® Device Center................................................................63
4.6.2 Bluetooth® Manager Device Setup.............................................................64
4.6.3 FTP Server Setup.......................................................................................72
4.7 Backup Directory File Management............................................................73
4.8 Datalogic Firmware Utility ...........................................................................74
4.8.1 Retrieving a Firmware Image Update .........................................................74
4.8.2 Installing DFU on the Host PC....................................................................75
4.8.3 Updating the Firmware................................................................................76
4.9 Datalogic Configuration Utility.....................................................................78
4.10 Datalogic Desktop Utility.............................................................................79
4.10.1 Administrative Options (Admin tab).............................................................81
4.10.2 Setting Hot Keys.........................................................................................84
4.10.3 Internet Explorer Configuration................................................................... 88
4.10.4 Modifying Windows Controls.......................................................................90
4.10.5 AppSelector Options (AppSelect tab)..........................................................91
4.11 AppSelector (Application Selector) .............................................................94
5TECHNICAL FEATURES........................................................................... 95
5.1 Technical Data............................................................................................95
5.2 Reading Diagrams......................................................................................99
6TEST CODES........................................................................................... 101
SAFETY REGULATIONS.........................................................................105
General Safety Rules................................................................................105
Power Supply............................................................................................105
Laser Safety..............................................................................................106
LED Class.................................................................................................112
Radio Compliance.....................................................................................113
FCC Compliance.......................................................................................115
RF Exposure Information (SAR) ...............................................................116
Industry Canada Compliance....................................................................117
SAR Compliance.......................................................................................117
WEEE Compliance ...................................................................................118
China RoHS Pollution Control Logos........................................................120
GLOSSARY..............................................................................................121

v
INDEX.......................................................................................................125

1
vi
REFERENCES
CONVENTIONS
This manual uses the following conventions:
“User” refers to anyone using a Datalogic Memor mobile computer.
“mobile computer” and "Datalogic Memor" refer to Datalogic Memor mobile computer.
“You” refers to the System Administrator or Technical Support person using this
manual to install, configure, operate, maintain or troubleshoot a Datalogic Memor
mobile computer.
“Single Dock” refers to the Datalogic Memor Single Slot Dock.
The label artworks may be only a draft. Refer to the product labels for more precise
information.
REFERENCE DOCUMENTATION
For further information regarding Datalogic Memor refer to the SDK Help on-Line.
SERVICES AND SUPPORT
Datalogic provides several services as well as technical support through its website.
Please check our website at www.datalogic.com under “Support & Services”, then
“Automatic Data Capture”, and click on the links indicated for further information
including:
- Downloads
- Manuals for the latest versions of user manuals and product guides.
- Software & Utilities for the latest firmware release for your product. You can
also click on the following link for direct access to this section:
www.datalogic.com/products_updates.
- Service Program for warranty extensions and maintenance agreements.
- Repair Centers for a list of authorised repair centers.
- Technical Support Automatic Data Capture email form to contact our
technical support.

vii
GENERAL VIEW
A)
QVGA 64K Color Display
B)
Good Read or User Programmable
LED
C)
Charging Status LED
D)
Speaker
E)
Scan Key
F)
Keyboard
G)
Microphone
H)
Strap with Stylus Holder
I)
Laser Safety Label
J)
Rear Speaker
K)
ON/OFF Power Key
L)
Product Label (under battery)
M) Battery Cover
A
F
B
H
D
G
C
E
I
L
K
J
M

1
viii
N) Data Capture Window
*
O) DC Charger Connector P) Communication/Charger Connector
(through cradle)
Q) Mini USB Communication Connector
(through cable)
*Remove protective film cover before use
N
O
P
Q

INTRODUCTION
1
1
1 INTRODUCTION
1.1 DATALOGIC MEMOR DESCRIPTION
The Datalogic Memor mobile computer maximizes a compact and light weight form
factor for ease of use and shirt pocket convenience without compromising durability.
Datalogic Memor features target applications found in field force automation, retail
stores, manufacturing and warehouses.
The computer architecture of the Datalogic Memor starts with the industry leading
XScale™ PXA310 microprocessor. Geared for computing requirements of real time
information management and communication. Memory of 128 MB RAM / 256 MB
Flash is sized for running multiple simultaneous applications, for managing large
databases or the use of thick applications when off-line autonomy is required. The
memory storage capacity can be increased through the user accessible Micro SD
Card Slot.
Microsoft Windows CE 5.0 with Microsoft WordPad and Internet Explorer 6.0
minimizes the operating system size for faster uploads and more storage space. A
software development kit (SDK) aids in creating applications for both of these
powerful Windows operating systems and alternative environments like Java Virtual
Machine.
Datalogic Memor provides voice and data wireless communication options to meet
the business need. A speaker and microphone equip the Datalogic Memor to handle
– VoIP phone calls or push-to-talk conversations. The Summit IEEE 802.11 abg
radio’s optimized transmit power and receiver sensitivity result in superior range with
a tailored user interface for easy configuration and consistent management.
Complimented by a CCX v4 security certification from Cisco, the Datalogic Memor
provides infrastructure compatibility focused on enterprise requirements for
encrypted communication and seamless roaming. Client side applications leverage
internet protocol connections for hands-free voice picking and push to talk
communications. Bluetooth® Wireless Technology connects headsets, printers and
other peripherals while eliminating cumbersome wires and costly replacement of
broken or damaged cables.
Two scanner options optimize the Datalogic Memor for the application needs. A laser
scanner tackles intensive applications where speed and a wide depth of field are
essential. Datalogic’s patented Green Spot good read feedback makes Datalogic
Memor’s laser scanner intuitive while reducing errors. The 2D scan engine option
leverages picture technology to capture a wide range of Linear, Stacked, and 2D
codes while also providing the flexibility to capture a signatures or drivers license.
Digital image decoding software reduces failed reads due to damaged and poor
quality barcodes while enabling the user to scan from almost any orientation.

1DATALOGIC MEMOR™
2
1
Durability ratings protect the computing investment against accidental drops and
occasional exposure to liquids and dust. A touch color display provides an easy to
read interface in a wide range of lighting conditions. The phone keyboard layout and
four direction joystick increase associate efficiency. Push button battery lock provides
an easy to locking mechanism for quick, no hassle battery exchanges. Rechargeable
Lithium polymer batteries in two sizes customize capacity to the application.
Charging cradles include a communication cradles for RS232 and USB. A powered
vehicle dock and power adapter cable extend charging capabilities onto the road.
Powered by Wavelink® device maintenance and management tools makes the
Datalogic Memor a simple device to both deploy and maintain. Datalogic Firmware,
Desktop and Configuration Utilities complete the package with unprecedented ability
to customize device configuration to the use environment or process. Combined
these tools streamline deployment and management activities while providing
developer tools to further customize units for specific applications.

INTRODUCTION
3
1
1.2 AVAILABLE MODELS
The Datalogic Memor is available in different models depending on the options it is
equipped with. All options are listed below:
•communication options: 802.11 abg radio, Bluetooth®
•data capture options: laser, imager
•operating system: Windows CE 5.0, Windows Mobile 6.1
For further details about the Datalogic Memor models refer to the web site:
http://www.datalogic.com.
For further information regarding Windows CE refer to the website:
http://www.microsoft.com/windowsembedded.
The currently available models are:
•944201016 DL-Memor+Batch+1DGS+CE5
Datalogic Memor, Batch, 128MB RAM/256MB Flash, 23-key Numeric, Std Laser
with Green Spot, CE 5.0
•944201038 DL-Memor+802.11+BT+1DGS+CE5
Datalogic Memor, 802.11 abg CCX V4, Bluetooth, 128MB RAM/256MB Flash,
23- key Numeric, Std Laser with Green Spot, CE 5.0
•944201039 DL-Memor+802.11+BT+2D+CE5
Datalogic Memor, 802.11 abg CCX V4, Bluetooth, 128MB RAM/256MB Flash,
23- key Numeric, Std 2D Imager, CE 5.0
•944201040 DL-Memor+802.11+BT+1DGS+WM6.1
Datalogic Memor, 802.11 abg CCX V4, Bluetooth, 128MB RAM/256MB Flash,
23-key Numeric, Std Laser with Green Spot, WM 6.1
•944201041 DL-Memor+802.11+BT+2D+WM6.1
Datalogic Memor, 802.11 abg CCX V4, Bluetooth, 128MB RAM/256MB Flash,
23-key Numeric, Std 2D Imager, WM 6.1

1DATALOGIC MEMOR™
4
1
1.3 PACKAGE CONTENTS
The Datalogic Memor package contains:
−1 Datalogic Memor mobile computer
−1 AC/DC power supply
−1 EU plug adapter
−1 UK Plug Adapter
−1 standard Mini USB cable
−1 extensible stylus
−1 rechargeable standard battery pack + cover
−1 hand-strap with stylus holder
−1 Quick Start Guide
−1 Safety and Regulatory Addendum
−1 Wavelink Avalanche Insert
−1 End User License Agreement (EULA) Sheet
Any other packages will contain the accessories necessary for the Datalogic Memor
connection to the host computer and to the network: the cradle, one or more
connection cables.
Remove all the components from their packaging; check their integrity and compare
them with the packing documents.
Keep the original packaging for use when sending products to the
technical assistance center. Damage caused by improper
packaging is not covered under the warranty.
CAUTION
Rechargeable battery packs are not initially fully charged. Therefore
the first operation to perform is to charge them. See section 2.1.
NOTE

INTRODUCTION
5
1
1.4 INSERTING A MICROSD CARD
The Datalogic Memor supports microSD memory cards. To access the microSD card
slot and insert the card, proceed as follows:
1. Turn off the Datalogic Memor.
2. Press the latch release button and pull the latch down:
3. Remove the cover and the battery pack, then open the microSD card slot by
pulling up the locking plate:

1DATALOGIC MEMOR™
6
1
4. Shift the cardholder to the left and then pull it up; insert the microSD card with
the written part upward:
5. Lock the card into place by pushing the cardholder down and then shifting it to
the right; pull the locking plate down:
6. Close the battery cover properly, by pressing the latch release button and pulling
the latch down.

INTRODUCTION
7
1
1.4.1 Removing the MicroSD Card
To remove the microSD card, follow the steps above to access the SD area, and
remove it from its slot.
Follow proper ESD pr
ecautions to avoid damaging the
microprocessors in the Datalogic Memor or the microSD card itself.
Proper ESD precautions include, but are not limited to, working on
an ESD mat and ensuring that the operator is properly grounded.
Do not force the card. If you feel resistance, remove the card, check
the orientation, and reinsert it.
Do not use the microSD card slot for any other accessories.
CAUTION

1DATALOGIC MEMOR™
8
1
1.5 ACCESSORIES
Cradles
94A151111 DL-Memor Single Cradle w Aux. Slot
94A151121 Dock Memor Vehicle w Power Adapter
94A151122 DL-Memor Single Ethernet-Usb_Host Cradle
94A151123 DL-Memor Multi Battery Charger
Batteries
94ACC1367 DL-Memor Large Capacity Battery CVR2
94ACC1368 DL-Memor Standard Battery CVR2
Power Supply
94ACC1324 PG5-30P35 AC/DC Power Supply EU/USA Plug
94ACC1334 PG5-30P35 AUS. Plug Adapter (10pcs)
94ACC1335 PG5-30P35 UK Plug Adapter (10pcs)
94ACC1339 PG5-30P35 EU. Plug Adapter (10pcs)
94ACC1369 DL-Memor Alkaline Adapter CVR2
Cables
94A051016 CAB-421 USB Type A-B-Mini Straight
94A051022 WIN-NET Serial CAB (HRS ST40x-18S-CV)
94A051024 USB A (4 pin F) to Mini A (5 pin M)
94A051966 Cable Memor 12 TO 24 V Power Adapter
Various
94ACC1328 DL-Memor Stylus Pen (10pcs)
94ACC1365 Headset Memor
94ACC1366 Softcase Memor w/Swivel
Use only a Datalogic approved power supply and cables. Use of an
alternative power supply will invalidate any approval given to this
device and may be dangerous.
NOTE

BATTERIES AND MAINTENANCE
9
2
2 BATTERIES AND MAINTENANCE
Rechargeable backup batteries and battery packs are not initially
fully charged. Therefore the initial operation to perform is to charge
them. See below.
NOTE
Annual replacement of rechargeable battery pack avoids possible
risks or abnormalities and ensures maximum performance.
CAUTION
2.1 CHARGING THE BATTERY PACK
The battery pack autonomy varies according to many factors, such
as the frequency of barcode scanning, RF usage, battery life,
storage, environmental conditions, etc.
NOTE
The battery icon on the Taskbar indicates when the battery pack is low.
It is possible to recharge the battery pack by connecting the power supply directly to
the Datalogic Memor.
Alternatively, it is also possible to recharge the battery pack by inserting the
Datalogic Memor into the single slot dock or the multi battery charger.
Moreover recharging is possible by USB Direct connection with the host computer,
but with longer charging times and only if the mobile computer off.
During the charging process the LED positioned at the right side of the display is red
constant. Once the charging process has been completed this LED is green constant
(see par. 4.4).
The stand alone battery pack may be recharged outside a Datalogic Memor using the
spare battery charging slot on the back of the single slot dock or the multi battery
charger.

1DATALOGIC MEMOR™
10
2
Do not use the Datalogic Memor until batteries are charged for
minimum 4 hours.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
CAUTION
Il y a risque d’explosion si la batterie est remplacée par une batterie
de type incorrect.
Mettre au rebut les batteris usagées confor mément aux instructions.
CAUTION
Even if the storage temperature range is wider, in order to achieve
the longest battery life, store the terminal and the spare batteries
between 20 to 30º C (68 to 86º F).
Datalogic Memor (including spare battery) should be charged at an
ambient temperature between 0° to +40 °C (+32° to +104 °F) to
achieve the maximum charging rate. Never charge the main device
or spare batteries in a closed space where excessive heat can build
up.
NOTE
The battery level may display incorrectly for several minutes after the
Datalogic Memor is disconnected from its charger if the charging
cycle is not completed.
NOTE

BATTERIES AND MAINTENANCE
11
2
The Datalogic Memor may get warm during charging; this is normal
and does not mean a malfunction.
NOTE
Use only a USB-IF compliant USB port as a charging source.
NOTE

1DATALOGIC MEMOR™
12
2
2.2 REPLACING THE BATTERY PACK
To correctly replace the battery pack, proceed as follows.
1. Turn off the Datalogic Memor.
2. Press the latch release button and pull the battery latch down :
3. Remove the cover and the battery pack.