
Enable/disable
Wi-Fi (WLAN)
function
Enable/disable WWAN/GPS
function
Enable/disableBluetooth
function
Enable/disableAuto-rotate
screen
function
Tab to set hotkey, light sensor, external GPS antenna, and
external
WWAN antenna settings. For details, refer to
"Configuring
the
SETUP Menu Settings." See User
Manual.
Triggers the
Barcode
Scanner
function
(optional device).
Green: System is
running
Blinking Green: Sleep
Mode
<r>)
RF Status of RF (WLAN, WWAN, or
Bluetooth)
communication.
LED blue when
function enabled.
Battery Indicate the
battery status:
•Green: battery fully charged (95% or above)
•Orange:
battery charging
•Flashing Orange: charging
error
•Red:
battery
is lower than
10%
•Off:
discharged
UIC
Rugged
Tablet
QuickMenu
Overview
NOTE: If the icon is gray (i.e. ), this
indicates
the
current function
is
disabled.
In
Windows
7 tap the arrow on the
Taskbar
(located to the left of the system tray)
then
tap the Quick Menu
Icon.
OFF
Quick Menu
Icons
Optional Hardware
•DC ADAPTER •Mag Stripe Reader with
Contact
•
Barcode
Scanner Smart Card
Reader
•X-Strap (Handstrap) •
Contactless
Smart Card
Reader
•Office Dock •Vehicle
Dock
Installing
the
Battery
1. Align and insert the
battery
to the battery
compartment.
2. Push
completely
until the
battery
locks into
place.
3. Slide the battery latch to the lock
position
to secure the
battery.
Status Light
Indicators
The tablet has status lights located near the top of the tablet (to
the
left of the front camera). See below for
information
on status
lights.
2015.9.23
DATALUX TM110 Tablet