Datamax I-4201 User manual

Ê
Printer
Connections
Ë
Ribbon
Loading
ØRotate the Printhead Latch and
raise the printhead
ØSlide the ribbon onto Ribbon
Supply Hub
ØRoute the Ribbon as shown
ØWrap the ribbon around the Ribbon
Take-up Hub
ØClose the printhead and rotate the
Ribbon Take-up Hub to remove the
slack in the ribbon
Quick Start
Guide
Datamax International
Herbert House
12 Elizabeth Way, Pinnacles
Harlow, Essex CM19 5FE UK
Phone: [phone]
Fax: [phone]
Asia-Pacific
19 Loyang Way
#01-01 CILC Building
Singapore 508724
Phone: [phone]
Fax: [phone]
Corporate Headquarters
4501 Parkway Commerce Blvd.
Orlando, Fl 32808
Phone: [phone]
Fax: [phone]
For the latest products, news, and support visit our
web page at
www.datamaxcorp.com

Ì
Loading Media
ØRotate the Printhead
Latch and raise the
printhead
ØSlide the Roll Media
onto the Media Hub
ØRoute the Media as
shownè
Internal Media Loading External Media Loading
Í
Printer
Controls
Ready Mode: ŒPause: Toggles the pause condition.
•Feed: The FEED button feeds a
label, and clears any faults
that have been corrected.
ŽCancel:Cancels a job and pauses the
printer.
•Menu: Toggles between the ready
and menu mode.
•Test: Enables the quick test mode,
see the Operators Manual
for additional information.
Menu Mode:
ŒArrow Up: Moves to the next item in the
menu tree, (increase values).
•Arrow Down:Moves to the previous item in
the menu mode, (decrease
values).
ŽEnter: Selects a displayed item or
value.
•ESC: Moves to the previous menu
level.
ŒReady: On indicates ready,
blinking indicates menu mode.
•Stop: On indicates paused state.
ŽError: On indicates a fault. To clear a fault
press the feed button.
Î
Printing a Test
Label
With the Printer On, and loaded with media (at least 4 inches wide):
ØVerify the printer is in the ‘Ready Mode’è
ØPress the button.
ØUsing the button scroll to ‘Print Config Label’. Press the
button again, after a brief hesitation the printer will print one
Configuration Label.
‘
Additional
Information
Refer to the Operator’s Manual for the Printhead Cam Adjustment when
using narrow media.
Be sure to follow and perform the suggested Cleaning Schedule listed in
the Operator’s Manual.
Contacting Datamax…
Corporate Headquarters [phone]
Technical Support [phone]
For the latest products, news, and support visit our web page at
www.datamaxcorp.com